Critical thickness and stress relaxation in YBaCuO (123) strained epitaxial layers and YBaCuO based strained superlattices

An energy model has been used to calculate the critical thickness h _c of YBaCuO thin films and YBaCuO based superlattices within an isotropic or anisotropic approximation. The critical thickness of single layers calculated from the anisotropic model (16 nm) is in good agreement with the previously published experimental values which are spread out from 4 to 20 nm. In the case of superlattices, relaxation appears to be governed by the critical thickness of the elementary sub-layers and is then better evaluated through the calculation performed for YBaCuO single layers. XRD measurements on YBa₂Cu₃O₇/PrBa₂Cu_3?xGa_xO₇ superlattices grown on {100{ SrTiO₃ have evidenced a tetragonal stress in the YBaCuO ab plane which remains expanded when the YBaCuO elementary layer thickness is lower than 4.8 nm (4 YBaCuO cells). However the critical temperature of the shortest period superlattices is only slightly affected by this expanded stress in contrast to the effect of an elastic stress externally applied along the ab plane of YBaCuO thin films.     

Radioanalytical monitoring of the formation of barium sulfate in aqueous solutions

The formation of barium sulfate in aqueous media causes problems of insoluble scale formation. On the other hand, the coprecipitation of uranium and transuranium elements with barium sulfate has been suggested for the determination of these elements in environmental monitoring processes. Therefore, the study of barium sulfate crystal growth is required. The investigations done so far suffer from the low sensitivity of the analytical methods used. In the present work we have overcome this problem by using¹³¹Ba for the preparation of supersaturated solutions. Thus kinetics parameters such as induction time and precipitation rates were measured. The polynuclear mechanism was found to be operative at high and the spiral growth at low supersaturations.     

Measurements: developments in the USA

Summary Sales and use of analytical instruments have expanded in the United States over the past two years, despite the recessionary nature of the economy. Interest in increasing the quality of analytical measurements seems to be undiminished, if not growing. Trends in several measurement areas, including health, environment, manufacturing, and commerce, are described as they bear on this growth of interest in reliably accurate measurements. The paper also considers trends in the development of reference materials and accreditation of laboratories in the USA. United States of America participation in efforts of the International Organization for Standardization, and a study by the International Bureau of Weights and Measures of how to provide for international traceability for analytical chemical measurements are mentioned.     

AES Depth profiling of semiconducting multilayer structures using an ion beam bevelling technique

An ion beam technique has been developed which allows the preparation of bevels from semiconducting heteroepitaxial structures with smooth surfaces and very flat angles in the order of 0.1°. The bevels are used for AES depth profiling of heterostructures by the line scan technique. Measured and calculated line scans from (Al,Ga)As/GaAs and SiGe/Si test structures are compared to estimate the contributions of the electron escape depth and the ion beam mixing to the depth resolution. Received: 21 August 1996 / Revised: 14 January 1997 / Accepted: 18 January 1997     

Micron-image transfer system with brightness amplifier in gold-vapor laser

A gas-discharge gold-vapor laser on self-terminating transitions with operating wavelength λ=312.2 nm has been used to develop a highly efficient system for image transfer. An optical scheme and all its parameters have been chosen optimal for image quality. It has been found both theoretically and experimentally that the best results on micron-structure image transfer are obtained with 2–5-times image reduction. Various types of masks have been used. A 1-µm structure has been resolved due to the choice of optimal exposure time of 10 ms under a period of pulse repetition (0.6 – 0.8) ms; in this case, the minimal fringe dimension was ≈2 µm with an image dimension of 2 mm for a laser tube 1.8 cm in diameter.     

An evolutionary method for optimization of plate buckling resistance

Optimization of plate buckling resistance is very complicated, because the in-plane stress resultants in the prebuckled state of a plate are functions of thickness distribution. This paper discusses the problem of finding the optimum thickness distribution of isotropic plate structures, with a given volume and layout, that would maximise the buckling load. A simple numerical method using the finite-element analysis is presented to obtain the optimum thickness distribution. Optimum designs of compression-loaded rectangular plates with different boundary conditions and plate aspect ratios are obtained by using the proposed method. Optimum designs from earlier studies and the methods of buckling analysis used to attain these results are discussed and compared with the designs from the proposed method. This paper also examines the reliability of the optimality criterion generally used for plate buckling optimization, which is based on the uniform strain energy density.     

Calculation of microdosimetric characteristics in electron and gamma-ray irradiated water

The results of a calculation of the characteristics of fluctuations in the absorption of energy of electrons and gamma rays in small sensitive volumes of a material in electronic equilibrium are presented. The calculations were performed by the method developed in [1]. The efficiency and accuracy of the method are demonstrated by comparisons with the experimental results and direct numerical simulation. The experience gained in using the method is analyzed. The main numerical result of this work is a table of coefficients enabling the calculation of the probability of the absorption of energy and the first two moments of the energy absorbed in spherical regions with radii of 1, 2, 4, and 8 m, starting only from the electronic spectrum in these regions, for water absorbers with arbitrary shape and arbitrary electronic or photonic sources with energies up to 1 MeV.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 2, pp. 77–82, February, 1988.     

Multivariate cardinal interpolation with radial-basis functions

For a radial-basis function?∶?→? we consider interpolation on an infinite regular lattice , tof∶? ⁿ→?, whereh is the spacing between lattice points and the cardinal function , satisfiesX(j)=δ _oj for allj∈? ⁿ. We prove existence and uniqueness of such cardinal functionsX, and we establish polynomial precision properties ofI _h for a class of radial-basis functions which includes \(\varphi (r) = r^{2q + 1} \) , \(\varphi (r) = r^{2q} \log r,\varphi (r) = \sqrt {r^2 + c^2 } \) , and \(\varphi (r) = 1/\sqrt {r^2 + c^2 } \) whereq∈? ₊. We also deduce convergence orders ofI _hf to sufficiently differentiable functionsf whenh→0.