Stereoselective Synthesis of cis,cis‐Configured Perhydroquinoxaline‐5‐Carbonitrile from Cyclohex‐2‐en‐1‐ol

cis,cis‐Configured perhydroquinoxaline‐5‐carbonitrile 10 was synthesized stereoselectively by ditosylation of trans,cis‐2,3‐dihydroxycyclohexane‐1‐carbonitrile 4 and subsequent reaction with ethylenediamine. The diol precursor 4 was stereoselectively obtained by regioselective opening of the epoxide 3 with KCN in water avoiding hazardous Et₂AlCN.     

Preparation and properties of rare-earth containing oxide fluoride glasses

The preparation of the rare earth containing oxide fluoride glasses LnF₃ (Ln; Y through Lu)-BaF₂-AlF₃-GeO₂ in which the nominal content of LnF₃ reached 60 mol% in maximum and their basic properties such as density, refractive index and glass transition temperature were investigated and summarized in detail. Especially, in order to discuss the local structure around the rare earth ion in the glass, the Judd-Ofelt analysis (discussion with Ω parameters) of the HoF₃-BaF₂-AlF₃-GeO₂ glasses was carried out. The unique fluorescent behavior and the magnetic properties of LnF₃-BaF₂-AlF₃-GeO₂ glasses (Ln = Tb and/or Sm) were also studied.     

Unraveling Inter‐ and Intrachain Electronics in Polythiophene Assemblies Mediated by Coordination Nanospaces

Strong interchain interactions render unsubstituted polythiophene un‐fusible, non‐melting, and insoluble. Therefore, control of the packing structure, which has a profound effect on the optical and electronic properties of the polymer, has never been achieved. Unsubstituted polythiophene was prepared in the one‐dimensional channels of [La(1,3,5‐benzenetrisbenzoate)]_n, where polymer chains form unprecedented assembly structures mediated by the host framework. It is noteworthy that the emission and carrier transport properties were drastically changed by varying the number of chains within a particular assembly. The response of the composite to additional guests is also examined as a method to use the composites as low‐concentration sensors. Our findings show that the encapsulation of polymer chains in host materials is a facile method for understanding the intrinsic properties of conjugated polymers, along with controlling and enhancing their functions.     

Glass Formation of a Coordination Polymer Crystal for Enhanced Proton Conductivity and Material Flexibility

The glassy state of a two‐dimensional (2D) Cd²⁺ coordination polymer crystal was prepared by a solvent‐free mechanical milling process. The glassy state retains the 2D structure of the crystalline material, albeit with significant distortion, as characterized by synchrotron X‐ray analyses and solid‐state multinuclear NMR spectroscopy. It transforms to its original crystal structure upon heating. Thus, reversible crystal‐to‐glass transformation is possible using our new processes. The glass state displays superior properties compared to the crystalline state; specifically, it shows anhydrous proton conductivity and a dielectric constant two orders of magnitude greater than the crystalline material. It also shows material flexibility and transparency.     

Superionic Conduction in Co‐Vacant P2‐NaxCoO2 Created by Hydrogen Reductive Elimination

The layered P2‐Na_xMO₂ (M: transition metal) system has been widely recognized as electronic or mixed conductor. Here, we demonstrate that Co vacancies in P2‐Na_xCoO₂ created by hydrogen reductive elimination lead to an ionic conductivity of 0.045 S cm^?1 at 25 °C. Using in situ synchrotron X‐ray powder diffraction and Raman spectroscopy, the composition of the superionic conduction phase is evaluated to be Na_0.61(H₃O)_0.18Co_0.93O₂. Electromotive force measurements as well as molecular dynamics simulations indicate that the ion conducting species is proton rather than hydroxide ion. The fact that the Co‐stoichiometric compound Na_x(H₃O)_yCoO₂ does not exhibit any significant ionic conductivity proves that Co vacancies are essential for the occurrence of superionic conductivity.     

In-Line Reactions and Ionizations of Vaporized Diphenylchloroarsine and Diphenylcyanoarsine in Atmospheric Pressure Chemical Ionization Mass Spectrometry

We propose detecting a fragment ion (Ph₂As⁺) using counter-flow introduction atmospheric pressure chemical ionization ion trap mass spectrometry for sensitive air monitoring of chemical warfare vomiting agents diphenylchloroarsine (DA) and diphenylcyanoarsine (DC). The liquid sample containing of DA, DC, and bis(diphenylarsine)oxide (BDPAO) was heated in a dry air line, and the generated vapor was mixed into the humidified air flowing through the sampling line of a mass spectrometer. Humidity effect on the air monitoring was investigated by varying the humidity of the analyzed air sample. Evidence of the in-line conversion of DA and DC to diphenylarsine hydroxide (DPAH) and then BDPAO was obtained by comparing the chronograms of various ions from the beginning of heating. Multiple-stage mass spectrometry revealed that the protonated molecule (MH⁺) of DA, DC, DPAH, and BDPAO could produce Ph₂As⁺ through their in-source fragmentation. Among the signals of the ions that were investigated, the Ph₂As⁺ signal was the most intense and increased to reach a plateau with the increased air humidity, whereas the MH⁺ signal of DA decreased. It was suggested that DA and DC were converted in-line into BDPAO, which was a major source of Ph₂As⁺.

Open image in new window

Graphical Abstract ?

     

Simultaneous detection of N-terminal fragment ions in a protein mixture using a ruthenium(II) complex

Use of a bis(terpyridine)ruthenium(II) derivative as an N-terminal labeling reagent resulted in the simultaneous detection and individual determination of all the N-terminal fragments of the proteins in a mixture without requiring any separation. All of the N-termini of the guanidinated proteins were labeled selectively by the ruthenium complex (-CO-labeling). After chymotryptic digestion, the fragments were analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and post-source decay (PSD). The -CO moiety exclusively enhanced N-terminal fragment ions in mass spectra and enabled easy N-terminal sequencing. In a mixture containing three different proteins (lysozyme, ubiquitin, and insulin), all of the N-terminal fragment ions labeled with the ruthenium complex were found to produce uniformly intense peaks without the detection of the other unlabeled fragments. The N-terminal sequences of these ions were determined individually by PSD analysis. Application to unknown proteins from Thermus thermophilus HB8 with two-dimensional electrophoretic separation resulted in the successful determination of the N-terminal sequence and easy identification of the target protein.     

Analysis of the temperature dependence of the high-frequency EMR spectra of Mn ions in the lithium-ion battery material LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>

This paper deals with the analysis of the temperature dependence of high-frequency EMR (HF-EMR) spectra due to Mn³⁺ and Mn⁴⁺ ions in the lithium manganese spinel LiMn₂O₄. A range of powder samples obtained by the sol-gel method with calcinations in several temperature ranges were prepared for this study. Based on the initial characterization carried out by a number of techniques, the physicochemical and structural properties of the samples were earlier determined. Independently, temperature magnetization and HF-EMR measurements were carried out. The EMR spectra vary strongly between samples, indicating possible structural or chemical changes. Quantitative analysis of the temperature dependence of the HF-EMR spectra due to Mn³⁺ and Mn⁴⁺ ions in LiMn₂O₄ is presented in this paper. The spectral analysis concerns the line shape, linewidth, intensity and g-factors. Fittings using the Lorentzian spectral shape and, to a certain extent, the Gaussian spectral shape have been carried out in order to parameterize the temperature dependence of the HF-EMR spectra. This parameterization of the HF-EMR experimental data enables a deeper characterization of the samples. Subsequently, a better insight into the role of the Mn³⁺ and Mn⁴⁺ ions in accounting for the characteristics most suitable for application of LiMn₂O₄ as a cathode material may be gained.     

New stilbenoids from Pholidota yunnanensis and their inhibitory effects on nitric oxide production

Six new stilbenoids, a (bibenzyldihydrophenanthrene) ether designated phoyunnanin D (1), a bis(dihydrophenanthrene) ether designated phoyunnanin E (2), and four stilbenes designated phoyunbene A-D (3-6), were isolated from the air-dried whole plant of Pholidota yunnanensis ROLFE. The new compounds were identified as 7-[2-(3-hydroxyphenethyl)-4-hydroxy-6-methoxyphenoxy]-4-hydroxy-2-methoxy-9,10-dihydrophenanthrene (1), 1-[(9,10-dihydro-4-hydroxy-2-methoxy-7-phenanthrenyl)oxy]-4,7-dihydroxy-2-methoxy-9,10-dihydrophenanthrene (2), trans-3,3'-dihydroxy-2',4',5-trimethoxystilbene (3), trans-3,4'-dihydroxy-2',3',5-trimethoxystilbene (4), trans-3,3'-dihydroxy-2',5-dimethoxystilbene (5), and trans-3-hydroxy-2',3',5-trimethoxystilbene (6) based on spectroscopic evidence. Furthermore, the inhibitory effects of compounds 1-6 on nitric oxide production in a murine macrophage-like cell line (RAW 264.7) activated by lipopolysaccharide and interferon-gamma were examined.