Controlled Space Radiation concept for mesh-free semi-analytical technique to model wave fields in complex geometries

Numerical modelling of the ultrasonic wave propagation is important for Structural Heath Monitoring and System Prognosis problems. In order to develop intelligent and adaptive structures with embedded damage detector and classifier mechanisms, detailed understanding of scattered wave fields due to anomaly in the structure is inevitably required. A detailed understanding of the problem demands a good modelling of the wave propagation in the problem geometry in virtual form. Therefore, efficient analytical, semi-analytical or numerical modelling techniques are required. In recent years a semi-analytical mesh-free technique called Distributed Point Source Method (DPSM) is being used for modelling various ultrasonic, electrostatic and electromagnetic wave field problems. In the conventional DPSM approach point sources are placed along the transducer faces, problem boundaries and interfaces to model incident and scattered fields. Every point source emits energy in all directions uniformly. Source strengths of these 360° radiation sources are obtained by satisfying interface and boundary conditions of the problem. In conventional DPSM modelling approach it is assumed that the shadow zone does not require any special consideration. 360° Radiation point sources should be capable of properly modelling shadow zones because all boundary and interface conditions are satisfied. In this paper it is investigated how good this assumption is by introducing the ‘shadow zone’ concept at the point source level and comparing the results generated by the conventional DPSM and by this modified approach where the conventional 360° radiation point sources are replaced by the Controlled Space Radiation (CSR) sources.     

Asymptotic behavior and finite element error estimates of Kelvin-Voigt viscoelastic fluid flow model

In this article, the convergence of the solution of the Kelvin-Voigt viscoelastic fluid flow model to its steady state solution with exponential rate is established under the uniqueness assumption. Then, a semidiscrete Galerkin method for spatial direction keeping time variable continuous is considered and asymptotic behavior of the semidiscrete solution is derived. Moreover, optimal error estimates are achieved for large time using steady state error estimates. Based on linearized backward Euler method, asymptotic behavior for the fully discrete solution is studied and optimal error estimates are derived for large time. All the results are even valid for κ→0, that is, when the Kelvin-Voigt model converges to the Navier-Stokes system. Finally, some numerical experiments are conducted to confirm our theoretical findings.     

Supported dual‐acidic 1,3‐disulfoimidazolium chlorozincate@HZSM‐5 as a promising heterogeneous catalyst for synthesis of indole derivatives

HZSM‐5‐supported Brönsted and Lewis acidic ionic solid 1,3‐disulfoimidazolium chlorozincate materials ([dsim]₂[ZnCl₄]@HZSM‐5) were synthesized with various ratios (3, 6, 9, 17 and 50% w/w). The heterogeneous materials were characterized via a variety of spectroscopic techniques. Dual acidity of these materials was determined using specified techniques. These acidic solids were examined as stable heterogeneous catalysts for the Fischer indole reaction of equimolar amounts of phenylhydrazine hydrochloride and various aliphatic or aromatic ketones at 80–90°C in neat condition to produce substituted indole derivatives. The efficient 17% ionic salt‐loaded HZSM‐5 composite was easily reused for ten consecutive cycles with a slight loss of its activity. The recycled catalyst was further analysed using powder X‐ray diffraction and inductively coupled plasma optical emission spectrometric techniques.     

Bioremediation of uranium from waste effluents using novel biosorbents: a review

Journal of Radioanalytical and Nuclear Chemistry - Several treatments for the removal of toxic heavy metals like uranium from wastewater have been developed, but none of them are sufficiently...     

Regioselective Synthesis of Polyheterocycles From 4-Cyclohex-2-ENYL-3-Hydroxy-1-Methylquinolin-2(1H)-One

4-Cyclohex-2-enyl-3-hydroxy-1-methylquinolin-2(1H)-one (4) was prepared in 90% yield by the thermal [3,3]sigmatropic rearrangement of 3-cyclohex-2-enyloxy-1-methylquinolin-2(1H)-one (3) in refluxing chloroben-zene for 10 h. Compound (4) was cyclised through a sequence of reactions viz. i) acetylation ii) addition of bromine and iii) treatment of the acetyl dibromo compound (6) with base to give a bicyclic product (7) in 90% yield. Treatment of compound 4 with pyridine hydro-bromide perbromide in dichloromethane at 0–5° C afforded a cyclic product 8 in excellent yield. Compound 4 when treated with cold conc. sulphuric acid at 0–5° C furnished the bicyclic product 12 in 89% yield.     

An expedient, regioselective synthesis of 2-alkylamino- and 2-alkylthiothiazolo[5,4-e]indoles

1-Benzenesulfonyl-5-aminoindole 5, prepared from 5-nitroindole 3, was condensed with alkyl isothiocyanates and separately with carbon disulfide and alkyl bromides/iodides to furnish efficiently the corresponding N-alkyl-thioureidoindoles 6a-c and the alkyl N-(indol-5′-yl)dithiocarbamates 9a-e, respectively. Their cyclisation using N-bromosuccinimide (NBS) and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), in the cold, followed by indolic N-deprotection, furnished regioselectively the 2-alkylamino- and the 2-alkylthiothiazolo[5,4-e]indoles 8a-c and 11a-e, respectively, in good overall yields.     

Effect of water and air-water interface on the structural modification of Ni-arachidate Langmuir-Blodgett films

Nickel arachidate (NiA) Langmuir-Blodgett (LB) films have been deposited on hydrophilic Si(0 0 1) substrates by three (up-down-up) and five (up-down-up-down-up) strokes. During deposition, substrates were kept inside the water subphase for different times after each down stroke. Structural information of all the LB films have been obtained from X-ray reflectivity (XRR) studies. One and two symmetric monolayer (SML) was deposited on top of the asymmetric monolayer (AML) in three and five stokes respectively. All the preformed LB films were then used to go through the air-water interface with the same speed that was used at the time of film deposition. Structural information obtained from the XRR studies show that mainly the top layer density decreases after passing through the air-water interface but the layered structure remains the same. Information obtained from both the XRR and atomic force microscopy (AFM) studies suggest that molecules peeled from the top SML layer do not reincorporate with the LB film through tail-tail hydrophobic interaction. Our study shows that NiA LB film has better stability compared with cadmium arachidate LB film inside the water subphase without forming any out-of-plane molecular reorganization.     

Trapping a Silicon(I) Radical with Carbenes: A Cationic cAAC–Silicon(I) Radical and an NHC–Parent-Silyliumylidene Cation

The trapping of a silicon(I) radical with N-heterocyclic carbenes is described. The reaction of the cyclic (alkyl)(amino) carbene [cAAC_Me] (cAAC_Me=:C(CMe₂)₂(CH₂)NAr, Ar=2,6-iPr₂C₆H₃) with H₂SiI₂ in a 3:1 molar ratio in DME afforded a mixture of the separated ion pair [(cAAC_Me)₂Si:^.]⁺I⁻ ( 1 ), which features a cationic cAAC–silicon(I) radical, and [cAAC_Me−H]⁺I⁻. In addition, the reaction of the NHC–iodosilicon(I) dimer [I_Ar(I)Si:]₂ (I_Ar=:C{N(Ar)CH}₂) with 4 equiv of I_Me (:C{N(Me)CMe}₂), which proceeded through the formation of a silicon(I) radical intermediate, afforded [(I_Me)₂SiH]⁺I⁻ ( 2 ) comprising the first NHC–parent-silyliumylidene cation. Its further reaction with fluorobenzene afforded the C_Ar−H bond activation product [1-F-2-I_Me-C₆H₄]⁺I⁻ ( 3 ). The isolation of 2 and 3 confirmed the reaction mechanism for the formation of 1 . Compounds 1 – 3 were analyzed by EPR and NMR spectroscopy, DFT calculations, and X-ray crystallography.     

Metabolite profiling and in-vitro colon cancer protective activity of Cycas revoluta cone extract

Abstract

The methanolic extract of Cycas revoluta cone (MECR) was analyzed by GC-MS and UHPLC for metabolite profiling and was evaluated for anti-colon cancer property by using in vitro assays like Cell Viability Assay, Colony Formation Assay, ROS Determination, Flowcytometry, DAPI staining assay, Tunel assay. GC-MS and HPLC analysis confirmed the presence of different phytochemicals in the extract of Cycas revoluta cone. In-vitro studies showed MECR extract showed significant anti-colon cancer activity by reducing proliferation and inducing apoptosis in colon cancer cell (HCT-8) line, but no such activity was seen in normal colon cell (CCD-18Co) line. The investigation confirms that MECR may be a promising candidate in colon cancer protection.     

Redox Non‐Innocence of Nitrosobenzene at Nickel

Nitrosobenzene (PhNO) serves as a stable analogue of nitroxyl (HNO), a biologically relevant, redox‐active nitric oxide derivative. Capture of nitrosobenzene at the electron‐deficient β‐diketiminato nickel(I) complex [ⁱPr₂NN_F6]Ni results in reduction of the PhNO ligand to a (PhNO)^./? species coordinated to a square planar Ni^II center in [ⁱPr₂NN_F6]Ni(η²‐ONPh). Ligand centered reduction leads to the (PhNO)^2? moiety bound to Ni^II supported by XAS studies. Systematic investigation of structure–reactivity patterns of (PhNO)^./? and (PhNO)^2? ligands reveals parallels with superoxo (O₂)^./? and peroxo (O₂)^2? ligands, respectively, and forecasts reactivity patterns of the more transient HNO ligand.