Synthesis and utility of new amine/nucleobase addition products of allenylphosphonates

In the reaction of allenylphosphonates with amines/nucleobases, depending on the amine and the allenylphosphonate, either Z- or E-vinylphosphonate or allylphosphonate as a single isomer with a β-amino functionality was isolated. A simple route to phosphonates with a β-NH₂ group is developed by direct reaction with ammonia. In reactions with adenine, three different modes of reaction, with one of them involving an unusual cyclisation, are observed. The utility of (enamino)allyl phosphonate products thus obtained in the synthesis of (enamino)-1,3-butadienes via Horner-Wadsworth-Emmons (HWE) reaction is also demonstrated.     

Potential energy surface of thionylimide

The potential energy surface (PES) of thionylimide has been searched using ab initio MO and density functional calculations. The electronic structures of the isomers of HNSO have been studied using the HF/6‐31+G*, MP2(full)/6‐31+G*, and B3LYP/6‐31+G* levels. Final energies of these molecules have been calculated at the high‐accuracy G2 and CBS‐Q levels. The probable pathways of isomerization of thionylimide to its isomers (e.g., thiocyanic acid, HONS, nitrosothiols) have been explored by studying the three‐ or four‐membered transition states. This study identified total eight possible isomers ( 1–8 ) of HNSO, of which four ( 1–4 ) have already been realized experimentally. Of the remaining four ( 5–8 ), at least two ( 5, 7 ) can be generated experimentally. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Electric field gradients in various chemical environments of133Ba by the sum peak method

The sum peak at 437 keV (356+81 keV) has been measured in various chemical and physico-chemical environments. The fact that the intensity ratio of the sum peak to its single peak changes with the circumstances in which the radioactive source is placed is used to observe the effect of the chemical environment on directional correlation coefficients of 351–81 keV cascade in¹³³Ba−¹³³Cs decay and to detect the variations in the electric field gradient in different barium compounds. The sum peak method has been found to be useful in describing the chemical influences onG ₂₂ parameters and hence in the study of electric field gradients.     

Über die Herstellung von Äther der enantio-14, 15-Dinorlabdan-Reihe aus Eperusäure

The Conversion of Eperuic Acid into Ethers of the enantio-14, 15-Dinorlabdane Series 5 and 6 are strongly odiferous substances of the ambra-type. Their enantiomers 7 and 8 , hitherto unknown, have been synthesized from eperuic acid (4) and their olfactory properties compared with those of 5 and 6 . 4 was esterified by CH₂N₂ and dehydrogenated with (C₆H₅Se)₂/H₂O₂ to the α,β-unsaturated ester 9 (61%). Oxidation by KMnO₄ in acetone yielded the ketone 3 (60%). Epoxidation followed by treatment with acid converted 3 into the acetals 7 (61%) and 8 (14%). 7 and 8 differ from 5 and 6 in odor intensity, and 6 and 8 show slightly different odor quality.     

Application of the sum peak method to study changes in the K-capture probability to the 1086 keV level and perturbed angular correlation parameters in the decay of152Eu

The sum peak method has been applied to electron capture probability changes to the 1086 keV level in the decay of¹⁵²Eu in the different environments, e.g. ethylenediaminetetraacetic acid (EDTA), bovine serum albumin (BSA) and hydrochloric acid (HCl). An attempt is also made to determine the effect of chemical environment on the directional correlation coefficient of the 1409–122 keV - cascade in¹⁵²Eu ¹⁵²Sm decay. A change of G₂₂ is found in the different chemical forms.     

Isomeric ruthenium terpyridine complexes [Ru(trpy)(L)Cl]n+ containing the unsymmetrically bidentate acceptor L=3-amino-6-(3,5-dimethylpyrazol-1-yl)-1,2,4,5-tetrazine. Synthesis, structures, electrochemistry, spectroscopy and DFT calculations

The isomeric title complexes were obtained in almost equimolar ratio from the reaction of Ru(trpy)Cl3 and L. Crystal structure analyses of the perchlorate hemihydrates, electrochemical and spectroscopic (NMR, UV/VIS, EPR) studies, supported by DFT calculations, reveal distinct differences between the isomeric redox series [1]n+(tetrazine-Nt trans to Cl) and [2]n+(pyrazolyl-Np trans to Cl; n= 0, 1, 2). The latter system with the pi acceptors trpy and tetrazine in the equatorial plane and the pyrazolyl and chloride donors in the axial positions exhibits facilitated oxidation, lower energy MLCT transitions, more balanced chelate coordination, and a higher g anisotropy in the oxidised (RuIII) state. According to partially resolved EPR spectra of one-electron reduced neutral compounds and they have the unpaired electron predominantly in the tetrazine ring of L.     

Heat-resistant polymers from melt-processable bisimido-bisphthalonitriles

Heat-resistant polymers which are processable into void-free components and suitable for composite applications have been synthesized by thermal/chemical polymerization of four newly developed bisimido-bisphthalonitriles containing silicon, ether, carbonyl, and hexafluoroisopropylidene groups. Thermal polymerization involving addition reactions was performed at 200–275°C for 2–10 h and then post-curing at 310°C for 10 h. Polymers VI, VII, VIII , and IX were obtained. The thermal polymerization was monitored using infrared spectroscopy. Thermal polymerization was also carried out in the presence of an aromatic diamine. A polyhexasocyclane ( V ) was synthesized by condensation polymerization of ether containing bisimido-bisphthalonitrile with 4,4′-diaminodiphenyl ether in solvent phenol. The synthesized polymers were evaluated for thermal stability using dynamic thermogravimetric analysis (TGA). Polymers VII, VIII, IX , and X showed thermal decomposition temperature in the range of 475–500°C in nitrogen and air atmosphere. The char yield of the polymers was in the range of 60–69% in nitrogen at 800°C. This study indicated that synthesized thermosetting polymers from ether and keto containing bisimido-bisphthalo-nitrile are potential candidates for development of graphite composites. © 1993 John Wiley & Sons, Inc.     

Au nanoparticles and polyaniline coated resin beads for simultaneous catalytic oxidation of glucose and colorimetric detection of the product

In this letter, we report the synthesis of Au nanoparticles (NPs) and polyaniline (PANI) on the same cation-exchange resin beads and demonstrate their use in catalyzing the oxidation of glucose to gluconic acid by Au NPs and simultaneously in detecting the formation of the acid by the color change of PANI. The synthesis was carried out by exchanging the cations of the resins with HAuCl4 and anilinuium chloride and then reducing the metal ions by NaBH4 to produce Au NPs followed by polymerization of aniline using H2O2. The green emeraldine salt form of PANI thus obtained was treated with NaOH to be converted to blue emeraldine base before use. The deposition of Au NPs was confirmed by a change in color of the bead, visible spectroscopy, X-ray diffraction, and scanning electron microscopic measurements. On the other hand, the presence of PANI was confirmed by Fourier transform infrared (FTIR) and ultraviolet-visible (UV-vis) spectroscopy. The formation of gluconic acid from glucose was confirmed by FTIR spectroscopy. We could detect the presence of glucose of a minimum 1.0 mM concentration in water, using the present method. Our experimental observations demonstrate the possibility of the incorporation of multifunctional components on the surfaces of resins for carrying out a chemical reaction as well as detection of the product.     

Physico-chemical properties of the sodium salts of some fatty acids in formamide solution in the temperature range 15–45°C

The thermal stability of some boracites, CuB₇O₁₃Cl, NiB₇O₁₃Br and FeB₇O₁₃I, was investigated using thermogravimetry in air up to 1000°, DTA in air to 1200° and evolved gas analysis in vacuum to 1200°C. Only the FeI compound showed weight loss below 1000°C. The endothermic peaks associated with melting were CuCl (1025°C), NiBr (1150°C) and FeI) (965°C). Evolved gas analysis indicated major differences in the decomposition products of the three materials.     

Universal consequences of the presence of excluded volume interactions in dilute polymer solutions undergoing shear flow

The role of solvent quality in determining the universal material properties of dilute polymer solutions undergoing steady simple shear flow is examined. A bead-spring chain representation of the polymer molecule is used, and the influence of solvent molecules on polymer conformations is modelled by a narrow Gaussian excluded volume potential that acts pairwise between the beads of the chain. Brownian dynamics simulations data, acquired for chains of finite length, and extrapolated to the limit of infinite chain length, are shown to be model independent. This feature of the narrow Gaussian potential, which leads to results identical to a delta-function repulsive potential, enables the prediction of both universal crossover scaling functions and asymptotic behavior in the excluded volume limit. Universal viscometric functions, obtained by this procedure, are found to exhibit increased shear thinning with increasing solvent quality. In the excluded volume limit, they are found to obey power law scaling with the characteristic shear rate beta, in close agreement with previously obtained renormalization group results. The presence of excluded volume interactions is also shown to lead to a weakening of the alignment of the polymer chain with the flow direction.