Solution-based chemical synthesis of boehmite nanofibers and alumina nanorods

This article reports an easy chemical method of synthesizing boehmite nanofibers by a modified sol-gel process involving aluminum isopropoxide precursor. Nanorods of gamma-alumina have been successfully prepared after dehydration of the viscous sol at 600 degrees C for 4 h in air. The boehmite nanofibers and gamma-alumina nanorods were characterized by X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy for surface chemistry and functional groups, scanning electron microscopy, high-resolution transmission electron microscopy with selected area electron diffraction, and energy-dispersed spectroscopy for morphology and structure identification. The length of the boehmite nanofibers was found to be more than 10 mum with a crystalline lattice structure. The mechanism of formation of the boehmite nanofibers included the preferential growth along the longitudinal axis due to interaction between the solvent molecules and the surface OH- groups of hydrogen bonds. It is also suggested that the boehmite nanofibers may have formed due to the inherent instability of the planar structure of the boehmite lattice. The diameter of the gamma-alumina nanorods was found to be less than 10 nm with a varying length in the range of 50-200 nm. Boehmite to gamma-Al2O3 transformation was attributed to the loss of water molecules by internal condensation of protons and hydroxyl ions.     

Novel solid-phase extraction and preconcentration technique coupled with ICP-AES for the determination of Cr(III), Ni(II), and Zn(II) in various water samples

Newly synthesized 2-propylpiperidine-1-carbodithioate (2-PPC) was used for the extraction of Cr(III), Ni(II), and Zn(II) from various water samples. In the present investigation, the use of a syringe loaded with sorbent for the separation and enrichment of Cr(III), Ni(II), and Zn(II) prior to their determination by inductively coupled plasma-atomic emission spectrometry (ICP-AES) was proposed to substitute the batch and column techniques. The described method was compared with the column technique with respect to fastness, simplicity, recovery, and risk of contamination. The syringe was loaded with 1.0 g of sorbent in order to retain the analyte elements. Next, 7.0 mL of sample solution (pH 5.0 ± 0.2) was drawn into the syringe in 15 s and discharged over 15 s. Then, an eluent (3.0 M HCl) was drawn into the syringe and ejected back to desorb the analyte elements. At the optimum conditions, the percentage recoveries of Cr(III), Ni(II), and Zn(II) were in the range of 94.50 to 99.62% with a standard deviation (S.D.) of 0.03%. The elements could be concentrated by drawing and discharging several portions of sample successively and eluting only one time. The detailed study of various interferences proved the method to be highly selective. The risk of contamination is less than that with the column technique. The method was successfully applied to the determination of Cr(III), Ni(II), and Zn(II) in spiked and natural water samples. The results obtained are in good agreement with those obtained by the reported methods at the 95% confidence level. The text was submitted by the authors in English.     

Mathematical Correction for Polyatomic Isobaric Spectral Interferences in Determination of Lanthanides by Inductively Coupled Plasma Mass Spectrometry

The determination of lanthanides by Inductively Coupled Plasma Mass Spectrometry (ICP‐MS) is complicated by several spectral overlaps from M⁺, MO⁺ or MOH⁺ ions formed in the ICP. Especially, it is essential to avoid the spectral interferences from lighter lanthanide and Ba polyatomic ions on middle or heavier lanthanides. To tackle this problem, we have developed a mathematical correction method, which reduces all the spectral overlaps from oxide species of Pr, Nd, Ce and Sm over Gd, Tb, Dy and Ho, and Gd, Tb over Yb and Lu. It can also successfully correct the oxide and hydroxide interference of Ba over Eu. The effectiveness of the proposed the mathematical correction scheme is demonstrated for the USGS Standard Rock samples AGV‐1 and G‐2. The results show that the experimental data obtained by applying the mathematical correction scheme for lanthanides is in good agreement with the reported values, using pneumatic and ultrasonic nebulisation methods, for their ICP‐MS analysis.     

Zero cycles on conic fibrations and a conjecture of Bloch

Let X be a smooth projective surface over a number field k. Let (CH₀(X)) denote the Chow group of zero-cyles modulo rational equivalence on X. Let CH₀(X) be the subgroup of CH ₀(X) consisting of classes which vanish when going over to an arbitrary completion of k. Bloch put forward a conjecture asserting that this group is isomorphic to the Tate-Shafarevich group of a certain Galois module atttached to X. In this paper, we disprove this general conjecture. We produce a conic bundle X over an elliptic curve, for which the group (CH₀(X) is not zero, but the Galois-theoretic Tate-Shafarevich group vanishes.     

A predictive model for impact response of viscoelastic polymers in drop tests

We show for the first time that a classical Hookean viscoelastic constitutive law for rubbery materials can predict the impact forces and deflections measured with a commercial drop tester when a mass, or tup with a flat impacting surface is dropped onto a flat pad of commercial impact-absorbing rubber. The viscoelastic properties of the rubber, namely the relaxation times and strengths, are obtained by a standard rheological linear-oscillatory test, and the equation of momentum transfer is then solved, using these measured parameters, assuming a uniaxial deflection of the pad during the impact. Good agreement between measured and predicted forces and deflections is obtained for a series of various drop heights, tup masses, impact areas, and pad thicknesses, as long as the deflection of the pad relative to its thickness is small or modest (<50% or so), and as long as the area of the pad is less than or equal to that of the tup. When the pad area is greater than the tup, forces are higher than predicted, unless an empirical factor is introduced to account for the nonuniaxial stretching of the ring of material that extends outside of the impact area. These results imply that the impact-absorbing properties of a rubbery polymeric material can be assessed by simply examining the material's linear viscoelastic spectrum.     

Synthesis of erythrinin A,a naturally occurring pyranoisoflavone

Erythrinin A ($\text{10}$) has been synthesised by the oxidative rearrangement of dihydropyranochalcone $\text{1}$ with thallium(III) nitrate (TTN) in trimethyl orthoformate (TMOF) to the dimethyl acetal $\text{2}$, followed by cyclisation to $\text{3}$, demethylation to $\text{6}$ and dehydrogenation. Compound $\text{10}$ could also be obtained from chalcone $\text{4}$ on similar rearrangement followed by cyclisation, demethoxymethylation and dehydrogenation. In another route, chalcone $\text{7}$ was oxidatively rearranged with TTN in TMOF, to $\text{8}$ which on treatment with HCl yielded $\text{10}$.     

Supramolecular porphyrin-fullerene via 'two-point' binding strategy: axial-coordination and cation-crown ether complexation

A highly stable porphyrin-fullerene conjugate with defined distance and orientation, was formed using a newly developed 'two-point' binding strategy involving axial-coordination and cation-crown ether complexation; photochemical studies performed in benzonitrile revealed efficient charge separation and slow charge-recombination in the supramolecular complex.     

Backbone cleavages of [M - H](-) anions of peptides. Cyclisation of citropin 1 peptides involving reactions between the C-terminal [CONH](-) residue and backbone amide carbonyl groups. A new type of beta cleavage: a joint experimental and theoretical study

This paper reports the study of backbone cleavages in the collision-induced negative-ion mass spectra of the [M - H](-) anions of some synthetic modifications of the bioactive amphibian peptide citropin 1 (GLFDVIKKVASVIGGL-NH(2)). The peptides chosen for study contain no amino acid residues which could effect facile side-chain cleavage, i.e. Ser (-CH(2)O, side-chain cleavage) and Asp (-H(2)O) are replaced by Ala or Lys. We expected that such peptides should exhibit standard and pronounced peaks due to alpha cleavage ions (and to a lesser extent beta cleavage ions) in their collision-induced negative-ion spectra. This expectation was realised, but the spectra also contained peaks formed by a new series of cleavage anions. These are produced following cyclisation of the C-terminal CONH(-) moiety at carbonyl functions of amide groups along the peptide backbone; effectively transferring the NH of the C-terminal CONH(-) group to other amino acid residues. We have called the product anions of these processes beta' ions, in order to distinguish them from standard beta ions. Some beta' ions also fragment directly to some other beta' ions of smaller mass. The reaction coordinates of alpha,beta and beta' backbone processes have been calculated at the HF/6-31G*//AM1 level theory for simple model systems. The initial cyclisation step of the beta' sequence is barrierless and exothermic. Subsequent steps have a maximum barrier of +40 kcal mol(-1), with the overall reaction being endothermic by some 30 kcal mol(-1) at the level of theory used. These calculations take no account of the complexity of the conformationally flexible peptide system, and it is surprising that each of the two reacting centres can 'find' each other in such a large system.     

Electron depleted bis(methylene)cyclobutenes: sulfinyl and sulfonyl substitution

Double [2,3] sigmatropic rearrangements of bis(propargyl sulfenates) to bis(allenic sulfoxides) and of bis(propargyl sulfinates) to bis(allenic sulfones) are shown to be a convenient and effective method for the preparation of conjugated diallene systems bearing two electron withdrawing trihalomethyl sulfoxide or sulfone substituents either on C-1 and C-6, or on C-3 and C-4. Such substituents are further shown to facilitate cyclization to bis(methylene)cyclobutenes, and to stabilize the latter. The electron withdrawing group substitution on the exocyclic methylene extremities proved more effective than similar substitution on the endocyclic double bond.     

Dithiane additions to vinyl epoxides: steric control over the SN2 and SN2' manifolds

High chemoselectivity can be achieved in the addition of lithium dithiane anions to vinyl epoxides exploiting the steric nature of the dithiane substituent. Unencumbered dithiane anions afford SN2 adducts, whereas sterically encumbered anions lead primarily to SN2' adducts. Furthermore, the SN2' addition occurs syn to the vinyl epoxide.