Single-drop micro-extraction and diffuse reflectance Fourier transform infrared spectroscopic determination of chromium in biological fluids

The present paper deals with a new micro-extraction procedure for selective separation of Cr(VI) in the form of a metaloxy anionic species namely dichromate (Cr₂O₇²⁻) with N¹-hydroxy-N¹,N²-diphenylbenzamidine (HOA) in to dichloromethane and its subsequent and rapid diffuse reflectance Fourier transform infrared spectroscopic (DRS-FTIR) determination employing potassium bromide matrix. The diffuse reflectance Fourier transform infrared spectroscopy gives both qualitative and quantitative information about the dichromate. The determination of chromium is based on the analytical peak selection, among the various vibrational peaks, at 902 cm⁻¹. The micro-extraction was based on the liquid-liquid solvent extraction (LLSE) principle. The dichromate binds with the nitrogen and oxygen atoms of N¹-hydroxy-N¹,N²-diphenylbenzamidine (HOA) and forms 1:2, Cr(VI):HOA complex in 0.1 mol L⁻¹ HCl medium. The formation of above complex, in the acidic medium, is confirmed by the appearance of chocolate-brown color in the micro-extract. The speciation studies of Cr(III) and Cr(VI) is done by conversion of Cr(III) into Cr(VI) utilizing H₂O₂ as an oxidizing agent. The chemistry of pure dichromate and that of its HOA complex is discussed. The limit of detection (LoD) and the limit of quantification (LoQ) of the method are found to be 0.01 μg g⁻¹ Cr₂O₇²⁻ and 0.05 μg g⁻¹ Cr₂O₇²⁻, respectively. The standard deviation value and the relative standard value at a level of 10 μg Cr₂O₇²⁻/0.1 g KBr for n = 10 is found to be 0.26 μg Cr₂O₇²⁻ and 2.6%, respectively. The relative standard deviation (n = 8 and 6) for the determination of dichromate (Cr₂O₇²⁻) in real human biological fluid samples is observed to be in the range 3.1-7.8%.     

Evaluation of the odd-even effect in limits of detection for electron microprobe analysis of natural minerals

Limit of detection (LOD), being a fundamental quality parameter for analytical techniques, has been recently investigated and a systematic behavior has been observed for most odd-even element pairs for many techniques. However, to the best of our knowledge very few LOD data are available in published literature for electron microprobe analysis; these consist of three papers, two being on rare-earth elements and the third covering a large number of elements of atomic number between 21 and 92. These data confirm the systematic behavior of LODs for many odd-even pairs. To initiate to full this gap, we determined LODs for several major rock-forming chemical elements from Na to Fe with atomic numbers between 11 and 26, during the microprobe analysis of common minerals (olivine, plagioclase, pyroxene, amphibole, quartz, and opaques) in volcanic rocks. The odd-even effect of nuclear stability seems to be present in LOD data for most odd-even pairs investigated. Nevertheless, the experimental strategy concerning the reference materials, calibration procedure, and blank measurements, should be substantially modified to better evaluate the systematic behavior of LOD values in microprobe analysis.     

Bright,NIR‐Emitting Au23 from Au25: Characterization and Applications Including Biolabeling

A novel interfacial route has been developed for the synthesis of a bright‐red‐emitting new subnanocluster, Au₂₃, by the core etching of a widely explored and more stable cluster, Au₂₅SG₁₈ (in which SG is glutathione thiolate). A slight modification of this procedure results in the formation of two other known subnanoclusters, Au₂₂ and Au₃₃. Whereas Au₂₂ and Au₂₃ are water soluble and brightly fluorescent with quantum yields of 2.5 and 1.3 %, respectively, Au₃₃ is organic soluble and less fluorescent, with a quantum yield of 0.1 %. Au₂₃ exhibits quenching of fluorescence selectively in the presence of Cu²⁺ ions and it can therefore be used as a metal‐ion sensor. Aqueous‐ to organic‐phase transfer of Au₂₃ has been carried out with fluorescence enhancement. Solvent dependency on the fluorescence of Au₂₃ before and after phase transfer has been studied extensively and the quantum yield of the cluster varies with the solvent used. The temperature response of Au₂₃ emission has been demonstrated. The inherent fluorescence of Au₂₃ was used for imaging human hepatoma cells by employing the avidin–biotin interaction.     

The effect of length of single‐walled carbon nanotubes (SWNTs) on electrical properties of conducting polymer–SWNT composites

DC conductivity of conjugated polymer‐single‐walled carbon nanotube (SWNT) composite films has been measured for different SWNT concentrations. The composite was prepared by dispersing SWNTs in the poly (3‐octylthiophene), P3OT matrix already dissolved in xylene. The conductivity of the composite films showed a rapid increase as the SWNT concentration increases beyond a certain value. This behavior is explained in terms of percolating paths provided by the SWNTs in the volume of polymer matrix. To investigate the effect of length of nanotubes on the percolation conductivity, different SWNT samples were employed with similar diameter but varying tube lengths. It was found that the conductivity of the composite films is strongly dominated by the length of the nanotubes. Lower percolation limit and high conductivity value of composite films is observed for longer nanotubes. Furthermore, the conductivity is observed to be dependent on the size of the host polymer molecule also. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 89–95, 2010     

Intriguing H-aggregate and H-dimer formation of coumarin-481 dye in aqueous solution as evidenced from photophysical studies

Photophysical properties of coumarin-481 (C481) dye in aqueous solution show intriguing presence of multiple emitting species. Concentration and wavelength dependent fluorescence decays and time-resolved emission spectra and area-normalized emission spectra suggest the coexistence of dye monomers, dimers, and higher aggregates (mostly trimers) in the solution. Because of the efficient intramolecular charge transfer (ICT) state to twisted intramolecular charge transfer (TICT) state conversion, the dye monomers show very short fluorescence lifetime of ~0.2 ns. Fluorescence lifetimes of dimers (~4.1 ns) and higher aggregates (~1.4 ns) are relatively longer due to steric constrain toward ICT to TICT conversion. Observed results indicate that the emission spectra of the aggregates are substantially blue-shifted compared to monomers, suggesting H-aggregation of the dye in the solution. Temperature-dependent fluorescence decays in water and time-resolved fluorescence results in water-acetonitrile solvent mixtures are also in support of the dye aggregation in the solution. Though dynamic light scattering studies could not recognize the dye aggregates in the solution due to their small size and low concentration, fluorescence up-conversion measurements show a relatively higher decay tail in water than in water-acetonitrile solvent mixture, in agreement with higher dye aggregation in aqueous solution. Time-resolved fluorescence results with structurally related non-TICT dyes, especially those of coumarin-153 dye, are also in accordance with the aggregation behavior of these dyes in aqueous solution. To the best of our knowledge, this is the first report on the aggregation of coumarin dyes in aqueous solution. Present results are important because coumarin dyes are widely used as fluorescent probes in various microheterogeneous systems where water is always a solvent component, and the dye aggregation in these systems, if overlooked, can easily lead to a misinterpretation of the observed results.     

Synthesis of angular triquinanes from 1-Alkynylbicyclo[3.2. 0]hept-2-en-7-ones. A tandem alkoxy-cope ring Expansion/Transannular ring closure reaction

Addition of ethenyllithium reagents to the carbonyl group of dialkyl squarate-derived 1-alkynylbicyclo[3.2.0]hept-2-ene-7-ones (15), followed by a TBAF workup, results in a low-temperature anion-accelerated alkoxy-Cope rearrangement which proceeds by way of a strained cyclic allene intermediates (e.g.,17). This leads to the formation of angularly fused triquinanes (e.g., 20) in which each of the rings is functionally differentiated. Bicyclo[6.3. 0]undecadienones (e.g., 36) are the major products when the reactions are quenched with aqueous bicarbonate rather than TBAF. Under analogous conditions 2-alkylidene-1-alkynylbicyclo[3.2. 0]heptan-7-ones also give bicyclo[6.3.0]undecadienones by a mechanism that was established to involve a 1,5-hydrgen shift in a strained allene intermediate. The synthetic scope and mechanism of these and related transformations are discussed.     

Photoinduced [4?+?2] cycloaddition reactions of benzo[b]thiophene-2,3-dione with alkenes

[4?+?2]-Photocycloadditions of benzo[b]thiophene-2,3-dione with electron-rich and electron-deficient alkenes have been described. Olefins preferentially add at both carbonyl groups to give the head-to-head [4?+?2] cycloadducts, i.e., dioxanes only. Comprehensive molecular orbital calculations at DFT-B3LYP level have been carried out to address the mechanism as well as regiochemical course of the reaction.     

Self-aggregation of reverse bis peptide conjugate derived from the unstructured region of the prion protein

A novel bis scaffold containing a pentapeptide PHGGG, derived from the prion octarepeat, forms fibrils of nanometric dimensions, thus indicating that certain segments in the unstructured region of the prion protein may facilitate an initial fibrillation event.     

Determination of thorium concentrations in soil and sand samples using instrumental neutron activation analysis

Thorium along with its daughter products present in the soil is one of the major contributors to the external gamma dose in the environment. To establish the dose levels, quantification of thorium contents in soil samples is very important. As a part of pre-operational environmental radiological surveillance, a total of 23 soil and six sand samples were collected from different locations around the proposed nuclear power plant site of Jaitapur, Maharashtra. Thorium concentrations in these samples were determined by instrumental neutron activation analysis (INAA). Samples were irradiated with neutrons in Apsara reactor at a neutron flux of?~5?×?10¹¹ cm^?2 s^?1 and radioactive assay was carried out using high resolution gamma ray spectrometry. Relative method of INAA was used for quantification of thorium utilizing 311.9?keV gamma ray of ²³³Pa, the daughter product of ²³³Th. The concentrations of thorium in the soil and sand samples were in the ranges of 4.0?C18.8 and 1.2?C6.2?mg?kg^?1 respectively.     

Self-assembly approach toward magnetic silica-type nanoparticles of different shapes from reverse block copolymer mesophases

In the present study poly(isoprene-block-ethylene oxide), PI-b-PEO, block copolymers are used to structure iron oxide and silica precursors into reverse mesophases, which upon dissolution of the organic matrix lead to well-defined nanoparticles of spheres, cylinders, and plates based on the original structure of the mesophase prepared. The hybrid mesophases with sphere, cylinder, and lamellar morphologies containing the inorganic components in the minority phases are characterized through a combination of small-angle X-ray scattering (SAXS), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), and electron energy loss spectroscopy (EELS). After heat treatments the respective nanoparticles on mica surfaces are characterized by scanning force microscopy (SFM). X-ray diffraction (XRD) and superconducting quantum interference device (SQUID) magnetometer measurements are performed to demonstrate that the heat treatment leads to the formation of a magnetic gamma-Fe2O3 crystalline phase within the amorphous aluminosilicate. The results pave the way to functional, i.e., magnetic nanoparticles where the size, shape, and iron oxide concentration can be controlled opening a range of possible applications.