Experimental investigation on the flow instability behavior of a multi-channel boiling natural circulation loop at low-pressures

Natural circulation as a mode of heat removal is being considered as a prominent passive feature in the innovative nuclear reactor designs, particularly in boiling-water-reactors, due to its simplicity and economy. However, boiling natural circulation system poses many challenges to designer due to occurrence of various kinds of instabilities such as excursive instability, density wave oscillations, flow pattern transition instability, geysering and metastable states in parallel channels. This problem assumes greater significance particularly at low-pressures i.e. during startup, where there is great difference in the properties of two phases. In light of this, a parallel channel loop has been designed and installed that has a geometrical resemblance to the pressure-tube-type boiling-water-reactor, to investigate into the behavior of boiling natural circulation. The loop comprises of four identical parallel channels connected between two common plenums i.e. steam drum and header. The recirculation path is provided by a single downcomer connected between steam drum and header. Experiments have been conducted over a wide range of power and pressures (1–10 bar). Two distinct unstable zones are observed with respect to power i.e. corresponding to low power (Type-I) and high power (Type-II) with a stable zone at intermediate powers. The nature of oscillations in terms of their amplitude and frequency and their evolution for Type-I and Type-II instabilities are studied with respect to the effect of heater power and pressure. This paper discusses the evolution of unstable and stable behavior along with the nature of flow oscillation in the channels and the effect of pressure on it.     

Palladium(0) nanoparticles-catalyzed ligand-free direct arylation of benzothiazole via C-H bond functionalization

Palladium nanoparticles, generated in situ efficiently catalyzes direct 2-C-H arylation of benzothiazole without requirement of any ligand. A wide range of substituted aryl and heteroaryl iodides participate in this reaction producing a series of 2-aryl/heteroaryl-benzothiazoles in high yields.     

Kinetics and mechanism of the oxidation of some cyclic and acyclic ketones by dodecatungstocobaltate(III)—A comparative study

The kinetics of oxidation of cyclohexanone(chxn), 2-butanone(but), and 1,3-dihydroxy-2-propanone (dhp) have been investigated in aqueous acidic media. A first-order dependence in complex is obtained at high acid and low oxidant concentration for these ketones. However, a zero-order rate prevails at high oxidant and low acid concentration, and this rate has been shown to be the acid catalyzed enolization rate of the ketone. A general rate expression has been derived to explain these behaviors and plausible mechanism has been offered by assuming the enol as the reactive species.     

Design and synthesis of multidentate ligands via metal promoted C-N bond formation processes and their coordination chemistry

This presentation reports some novel examples of organic ring amination reactions via metal mediation. The organic transformations are highly regioselective and can be controlled by the proper selection of the mediator complex. The two isomeric organic ligands viz. HL¹ and HL² were isolated in their pure states by the removal of the metal ions. These were fully characterized. The ligand HL¹ has lowpKa, 8.5. Upon deprotonation, it behaves as a potentialbis chelating N,N,N-donors. The coordination chemistry of the HL¹ ligand involving some 3d-metal ions is described. Two unusual low-spin complexes of manganese(II) and iron(III) are reported. The ferric complex displayed a rhombic EPR while, the corresponding manganese compound showed a complex pattern due to hyperfine coupling. All the complexes displayed large number of redox responses. A brief mention about the future projection of this work is noted.     

On the determination and construction of optimal row-column designs having unequal row and column sizes

In this paper we consider experimental situations requiring usage of a row-column design where v treatments are to be applied to experimental units arranged in b ₁ rows and b ₂ columns where row i has size k _1i , i=1,..., b ₁ and column j has size k _2j , j=1,..., b ₂. Conditions analogous to those given in Kunert (1983, Ann. Statis., 11, 247–257) and Cheng (1978, Ann. Statist., 6, 1262–1272) are given which can often be used to establish the optimality of a given row-column design from the optimality of an associated block design. In addition, sufficient conditions are derived which guarantee the existence of an optimal row-column design which can be constructed by appropriately arranging treatments within blocks of an optimal block design.Visiting from the Indian Statistical Institute.     

Electrical spin injection and threshold reduction in a semiconductor laser

A spin-polarized vertical-cavity surface-emitting laser is demonstrated with electrical spin injection from an Fe/Al0.1Ga0.9As Schottky tunnel barrier. Laser operation with a spin-polarized current results in a maximum threshold current reduction of 11% and degree of circular polarization of 23% at 50 K. A cavity spin polarization of 16.8% is estimated from spin-dependent rate equation analysis of the observed threshold reduction.     

Fibrillar Networks of Glycyrrhizic Acid for Hybrid Nanomaterials with Catalytic Features

Self‐assembly of the naturally occurring sweetening agent, glycyrrhizic acid (GA) in water is studied by small‐angle X‐ray scattering and microscopic techniques. Statistical analysis on atomic force microscopy images reveals the formation of ultralong GA fibrils with uniform thickness of 2.5 nm and right‐handed twist with a pitch of 9 nm, independently of GA concentration. Transparent nematic GA hydrogels are exploited to create functional hybrid materials. Two‐fold and three‐fold hybrids are developed by introducing graphene oxide (GO) and in situ‐synthesized gold nanoparticles (Au NPs) in the hydrogel matrix for catalysis applications. In the presence of GO, the catalytic efficiency of Au NPs in the reduction of p‐nitrophenol to p‐aminophenol is enhanced by 2.5 times. Gold microplate single crystals are further synthesized in the GA hydrogel, expanding the scope of these hybrids and demonstrating their versatility in materials design.     

Extraordinary Changes in the Electronic Structure and Properties of CdS and ZnS by Anionic Substitution: Cosubstitution of P and Cl in Place of S

Unlike cation substitution, anion substitution in inorganic materials such as metal oxides and sulfides would be expected to bring about major changes in the electronic structure and properties. In order to explore this important aspect, we have carried out first‐principles DFT calculations to determine the effects of substitution of P and Cl on the properties of CdS and ZnS in hexagonal and cubic structures and show that a sub‐band of the trivalent phosphorus with strong bonding with the cation appears in the gap just above the valence band, causing a reduction in the gap and enhancement of dielectric properties. Experimentally, it has been possible to substitute P and Cl in hexagonal CdS and ZnS. The doping reduces the band gap significantly as predicted by theory. A similar decrease in the band gap is observed in N and F co‐substituted in cubic ZnS. Such anionic substitution helps to improve hydrogen evolution from CdS semiconductor structures and may give rise to other applications as well.     

New flavonoid glycosides and other chemical constituents from Clerodendrum phlomidis leaves: isolation and characterisation

Phytochemical investigation of the plant Clerodendrum phlomidis Linn. F. (Lamiaceae) has now led to the isolation of two new flavonoid glycosides (1, 2) together with six known compounds identified as pectolinaringenin (3), pectolinaringenin-7-O-β-d-glucopyranoside (4), 24β-ethylcholesta-5,22E,25-triene-3β-ol (5), 24β-ethylcholesta-5,22E,25-triene-3β-O-β-D-glucopyranoside (6), (2S,3S,4R,10E)-2-[(2′R)-2′-hydroxytetracosanoylamino]-10-octadecene-1,3,4-triol (7) and andrographolide (8) mainly by spectroscopic analysis. Compounds 4 and 6–8 are reported for the first time from C. phlomidis.