Pharmacokinetic detection of penicillin excreted in urine using a totally internally reflected resonance light scattering technique with cetyltrimethylammonium bromide

A quantitative analysis method for penicillins including ampicillin (AmP), benzyl penicillin (BP), oxacillin (OA) and amoxycillin (AmO) is proposed that makes use of the totally internally reflected resonance light scattering (TIR-RLS) signal from the penicillin at the H₂O/CCl₄ interface in the presence of cetyltrimethylammonium bromide (CTMAB), and enables the pharmacokinetics of penicillin taken orally and excreted through urine to be monitored. Penicillin is coadsorbed with CTMAB at the H₂O/CCl₄ interface in neutral solution, resulting in the formation of ion associates that display greatly enhanced TIR-RLS signals (maximum at 368–372 nm). This enhanced TIR-RLS intensity was found to be proportional to the penicillin concentration over the range 0.2×10^–6 to 2.2×10^–6 mol L^–1, with limits of determination (3) of 5.0×10^–8 to 7.0×10^–8 mol L^–1. Pharmacokinetics studies performed using the present method show that the excretion of orally-taken ampicillin through urine has a half-time of 1.05 h and an excremental quantum over 8 h of 49.3%, respectively.     

Orthogonally Protected, Carboxy-Activated L-Homoisoserine, 2-Methyl-L-homoisoserine, and Homoisocysteine Derivatives. New Building Blocks for Peptide and Depsipeptide Modification

Starting from L-malic, L-citramalic, and rac. thiomalic acids routes to L-homoisoserine, 2-methyl-L-homoisoserine and rac. homoisocysteine have been developed. The new orthogonally protected and carboxy-activated building blocks are GABA as well as -hydroxy and -mercapto acid derivatives, suitable for the construction of peptide and depsipeptide surrogates.     

Microfluidic three-dimensional biomimetic tumor model for studying breast cancer cell migration and invasion in the presence of interstitial flow

Cell migration and invasion are critical steps in cancer metastasis, which are the major cause of death in cancer patients. Tumor-associated macrophages(TAMs) and interstitial flow(IF) are two important biochemical and biomechanical cues in tumor microenvironment, play essential roles in tumor progression. However, their combined effects on tumor cell migration and invasion as well as molecular mechanism remains largely unknown. In this work, we developed a microfluidic-based 3 D breast cancer model by co-culturing tumor aggregates, macrophages, monocytes and endothelial cells within 3 D extracellular matrix in the presence of IF to study tumor cell migration and invasion. On the established platform, we can precisely control the parameters related to tumor microenvironment and observe cellular responses and interactions in real-time. When co-culture of U937 with human umbilical vein endothelial cells(HUVECs) or MDA-MB-231 cells and tri-culture of U937 with HUVECs and MDA-MB-231 cells, we found that mesenchymal-like MDA-MB-231 aggregates activated the monocytes to TAM-like phenotype macrophages. MDA-MB-231 cells and IF simultaneously enhanced the macrophages activation by the stimulation of colony-stimulating factor 1(CSF-1). The activated macrophages and IF further promoted vascular sprouting via vascular endothelial growth factor(VEGFα) signal and tumor cell invasion. This is the first attempt to study the interaction between macrophages and breast cancer cells under IF condition. Taken together, our results provide a new insight to reveal the important physiological and pathological processes of macrophages-tumor communication. Moreover, our established platform with a more mimetic 3 D breast cancer model has the potential for drug screening with more accurate results.     

Determination of total chlorine in waste oil

Summary A simple method has been developed to determine the concentration of organic chlorine in waste oil. The determination is based on the conversion of organic chlorine to inorganic chloride by reaction with sodium biphenyl followed by extraction with nitric acid and a mixture of nitric acid and water. The concentration of chloride is determined by direct potentiometry with an ion-selective electrode. The limit of determination amounts to 3·10^–5 mol·l^–1 chloride ions with a standard deviation of 3.5%. Different samples of waste oil have been analyzed and the results have been compared to those obtained by combustion in a H₂/O₂ flame followed by potentiometric titration with silver nitrate.     

The thermal degradation of poly(diethyl fumarate)

The kinetics and mechanism of the thermal degradation of poly(diethyl fumarate) (PDEF) were studied by thermogravimetry, as well as by analysis of the thermolysis volatiles and polymer residue. The characteristic mass loss temperatures were determined, as were the overall thermal degradation activation energies of three PDEF samples of varying molar mass. Ethylene and ethanol were present in the thermolysis volatiles at degradation temperatures below 300 °C, while diethyl fumarate was also evidenced at higher degradation temperatures. The amount of monomer increased with increasing degradation temperature. The dependence of the molar mass of the residual polymer on the degradation time and temperature was established and the number of main-chain scissions per monomer unit, s/P₀, calculated. A thermal degradation mechanism including de-esterification and random main-chain scission is proposed. The thermal degradation of PDEF was compared to the thermolysis of poly(ethyl methacrylate) (PEMA), poly(diethyl itaconate) (PDEI) and poly(ethyl acrylate) (PEA).     

The transitional isoelectric focusing process

The transitional isoelectric focusing (IEF) process (the course of pH gradient formation by carrier ampholytes (CAs) and the correlation of the focusing time with CA concentration) were investigated using a whole-column detection capillary isoelectric focusing (CIEF) system. The transitional double-peak phenomenon in IEF was explained as a result of migration of protons from the anodic end and hydroxyl ions from the cathodic end into the separation channel and the higher electric field at both acidic and basic sides of the separation channel. It was observed that focusing times increase logarithmically with CA concentration under a constant applied voltage. The correlation of focusing time with CA concentration was explained by the dependence of the charge-transfer rate on the amount of charged CAs within the separation channel during focusing.     

Preparation and Characterisation of Nano-Structured WO<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> Layers for Photoelectrochromic Devices

Nano-structured WO₃-TiO₂ layers were prepared by the sol-gel route. To obtain transparent, porous and crack free layers up to 0.8 μ m with a single dipping cycle a templating strategy was used. As a template three-dimensionally network based on organically modified silane was introduced to the WO₃ and TiO₂ sols. The WO₃ layers were dip-coated onto the conductive glass substrate (TCO) and the TiO₂ layers on the top of the WO₃ layer. The morphology and the structure of the layers were determined by Scanning Electron Microscopy (SEM), High Resolution Transmission Electron Microscopy (HR-TEM), Energy Dispersive X-Ray Spectroscopy (EDXS), Auger and Infrared spectroscopy. SEM image of the WO₃-TiO₂ layer confirmed the nano-porosity of the layers and give the size of the particles of about 10 nm for TiO₂ and 30 nm for WO₃ layer. Further analysis indicated that the titanium sol penetrates the WO₃ layer. Particles in the WO₃ layer consist of a crystalline monoclinic WO₃ core surrounded by a 5–10 nm amorphous phase consisting of WO₃, TiO₂ and SiO₂. The WO₃-TiO₂ layers were used to assemble all solid state photoelectrochromic (PE) devices. Under 1 sun irradiation (1000 W/m²) the visible transmittance of the PE device changes from 62% to 1.6%. The colouring and bleaching processes last about 10 minutes.     

Oxygen transport in La<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>Co<Subscript>1−<Emphasis Type="Italic">y</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>O<Subscript>3−δ</Subscript>

The surface exchange coefficient and chemical diffusion coefficient of oxygen for the perovskites La_0.6Sr_0.4Co_1–yFe_yO_3– (y=0.2, 0.5 and 0.8) were measured using the conductivity relaxation technique. Measurements were performed between 600 and 800 °C in an oxygen partial pressure range between 10^–4 and 1 bar. Both transport coefficients decrease markedly with decreasing oxygen partial pressure below about 10^–2 bar at all temperatures. This is attributed to ordering of oxygen vacancies. Implications for using La_0.6Sr_0.4Co_1–yFe_yO_3– as an oxygen separation membrane are discussed.Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10-12 April 2003     

Electrostatic interactions between amphoteric latex particles and proteins

The electrostatic interactions between amphoteric polymethyl methacrylate latex particles and proteins with different pI values were investigated. These latex particles possess a net positive charge at low pH, but they become negatively charged at high pH. The nature and degree of interactions between these polymer particles and proteins are primarily controlled by the electrostatic characteristics of the particles and proteins under the experimental conditions. The self-promoting adsorption process from the charge neutralization of latex particles by the proteins, which have the opposite net charge to that of the particles, leads to a rapid reduction in the zeta potential of the particles (in other words colloidal stability), and so strong flocculation occurs. On the other hand, the electrostatic repulsion forces between similarly charged latex particles and the proteins retard the adsorption of protein molecules onto the surfaces of the particles. Therefore, latex particles exhibit excellent colloidal stability over a wide range of protein concentrations. A transition from net negative charge to net positive charge, and vice versa (charge reversal), was observed when the particle surface charge density was not high enough to be predominant in the protein adsorption process.     

Separation of fatty acid methyl esters by comprehensive two-dimensional supercritical fluid chromatography with packed columns and programming of sampling duration

Fatty acid methyl esters from various fats and oils were separated by comprehensive two-dimensional supercritical fluid chromatography with conventional packed columns and FID detection. The first dimension was a silica gel column and the second dimension was an ODS column. This combination was largely orthogonal for the separation of fatty acid methyl esters. The first dimension separations were primarily based on the number of double bonds while the second dimension separations were based on the chain length. The highly-ordered chromatograms and improved resolution allowed the easy detection and identification of minor components. Although the first dimension separations were performed under isobaric conditions where the peak width increased in proportion to the retention, the programming of the sampling duration allowed us to maintain the optimum re-injection frequency (3–4 times) per peak into the second dimension and so to minimize the total analysis time without deteriorating the resolution.