Highly sensitive and wide-range nonenzymatic disposable glucose sensor based on a screen printed carbon electrode modified with reduced graphene oxide and Pd-CuO nanoparticles

A nanocomposite consisting of reduced graphene oxide decorated with palladium-copper oxide nanoparticles (Pd-CuO/rGO) was synthesized by single-step chemical reduction. The morphology and crystal structure of the nanocomposite were characterized by field-emission scanning electron microscopy, high resolution transmission electron microscopy and X-ray diffraction analysis. A 3-electrode system was fabricated by screen printing technology and the Pd-CuO/rGO nanocomposite was dropcast on the carbon working electrode. The catalytic activity towards glucose in 0.2 M NaOH solutions was analyzed by linear sweep voltammetry and amperometry. The steady state current obtained at a constant potential of +0.6 V (vs. Ag/AgCl) showed the modified electrode to possess a wide analytical range (6 μM to 22 mM), a rather low limit of detection (30 nM), excellent sensitivity (3355 μA∙mM⁻¹∙cm⁻²) and good selectivity over commonly interfering species and other sugars including fructose, sucrose and lactose. The sensor was successfully employed to the determination of glucose in blood serum.

A highly sensitive nonenzymatic electrochemical sensor was fabricated using a Pd-CuO composite with reduced graphene oxide. The sensor has a wide detection range and was used to sense glucose in blood serum

     

A novel fluorophore with dual fluorescence: local excited state and photoinduced electron-transfer-promoted charge-transfer state.

Absorption and emission spectra of 9-N,N-dimethylaniline decahydroacridinedione (DMAADD) have been studied in different solvents. The fluorescence spectra of DMAADD are found to exhibit dual emission in aprotic solvents and single emission in protic solvents. The effect of solvent polarity and viscosity on the absorption and emission spectra has also been studied. The fluorescence excitation spectra of DMAADD monitored at both the emission bands are different. The presence of two different conformation of the same molecule in the ground state has lead to two close lying excited states, local excited (LE) and charge transfer (CT), and thereby results in the dual fluorescence of the dye. A CTstate involving the N,N-dimethylaniline group and the decahy droacridinedione chromophore as donor and acceptor, respectively, has been identified as the source of the long wavelength anomalous fluorescence. The experimental studies were supported by ab initio time dependent-density functional theory (TDDFT) calculations performed at the B3LYP/6-31G* level. The molecule possesses photoinduced electron transfer (PET) quenching in the LE state, which is confirmed by the fluorescence lifetime and fluorescent intensity enhancement in the presence of transition metal ions.     

Iron chelation properties of an extracellular siderophore exochelin MS

The coordination chemistry of an extracellular siderophore produced by Mycobacterium smegmatis, exochelin MS (ExoMS), is reported along with its pK(a) values, Fe(III) and Fe(II) chelation constants, and aqueous solution speciation as determined by spectrophotometric and potentiometric titrations. Exochelin MS has three hydroxamic acid groups for Fe(III) chelation and has four additional acidic protons from a carboxylic acid group and three primary amine groups, on the backbone of the molecule. The pK(a) values for the three hydroxamic acid moieties, the carboxylic acid group and the alkylammonium groups on ExoMS, correspond well with the literature values for these moieties. Equilibrium constants for proton-dependent Fe(III)-ExoMS equilibria were determined using a model involving the sequential protonation of the Fe(III)-ExoMS complexes at the first and second coordination shells. The equilibrium constants (beta) for the overall formation of Fe(III)ExoMS(H(3))(2+) and Fe(II)ExoMS(H(3))(+) from Fe((aq))(3+) or Fe((aq))(2+) and the deprotonated hydroxamate coordinating group form of the siderophore, ExoMS(H(3))(-), are calculated as log beta(III) = 28.9 and log beta(II) = 10.1. A calculated pFe value of 25.0 is very similar to that of other linear trihydroxamic acid siderophores, and indicates that ExoMS is thermodynamically capable of removing Fe(III) from transferrin. The E(1/2) for the Fe(III)-ExoMS/Fe(II)-ExoMS couple was determined from quasi reversible cyclic voltammograms at pH = 6.5 and found to be -380 mV.     

Nonlinear transient dynamic response of damped plates using a higher order shear deformation theory

Damped transient dynamic elasto-plastic analysis of plate is investigated. A finite element model based on a C ⁰ higher order shear deformation theory has been developed. Nine noded Lagrangian elements with five degrees of freedom per node are used. Selective Gauss integration is used to evaluate energy terms so as to avoid shear locking and spurious mechanisms. Von Mises and Tresca yield criteria are incorporated along with associated flow rules. Explicit central difference time stepping scheme is employed to integrate temporal equations. The mass matrix is diagonalized by using the efficient proportional mass lumping scheme. A program is developed for damped transient dynamic finite element analysis of elasto-plastic plate. Several numerical examples are studied to unfold different facets of damping of elasto-plastic plates.     

Oil-induced anomalous thermoresponsive viscoelasticity in fluorinated surfactant systems

We have studied the rheology and structure of a mixed nonionic fluorinated surfactant, perfluoroalkyl sulfonamide ethoxylate, C(8)F(17)SO(2)N(C(3)H(7))(CH(2)CH(2)O)(n)H abbreviated as C(8)F(17)EO(10), and perfluorodecalin (C(10)F(18)) or perfluoropolyether oil, (C(3)F(6)O)(n)COOH, in an aqueous system using rheometry and small-angle X-ray scattering (SAXS) techniques. In the absence of oil, the viscosity of surfactant solutions (10 and 15 wt %) first decreases slightly and then more strongly with temperature. Addition of a small amount of fluorinated oil to the wormlike micellar solution disrupts the network structure and decreases the viscosity sharply at lower temperature indicating a rod-sphere transition. The trend of the viscosity curve changes gradually and an anomalous viscosity maximum as a function of temperature appears. It is found that perfluoropolyether oil decreases the viscosity more effectively than perfluorodecalin. The generalized indirect Fourier transformation (GIFT) analysis of the SAXS data confirmed the formation of long rod-like particles in an oil-free, surfactant/water system at 20 degrees C. Addition of a trace amount of fluorinated oils induces modulation in the structure of the micelles and eventually short rods or spherical particles are formed. The decreasing trend in the viscosity with oil concentration is thus attributed to the microstructure changes induced by the added oils.     

Transforming Gaussians into Wannier functions using inversion of cyclic matrix

One-dimensional Gaussians are transformed into orthonormalized atomic orbitals (OAOS ) using the inverse of the cyclic overlap matrix. During that process it was found that these OAOS are nothing but the Wannier functions and have properties similar to the Wannier functions obtained by Wannier himself from Gaussians using a different method. The present method gives rise to a better Wannier function with less distortion.     

Electronic structure of helium-trapped vacancy in aluminum using multiple scattering Xα method

The self-consistent multiple scattering X_α (MSX _α) method is used to arrive at the electronic structure of a helium-trapped vacancy in aluminum using a cluster model. The calculated orbital energies, electron density, and charge distributions are compared with the available theoretical results. It is shown that helium trapping causes the reshuffling and upward movement of the cluster levels (with vacancy).     

Reaction Between Bis(Dichlorophosphoryl)Imide and Hexamethyldisilazane

By reaction between bis(dichlorophosphoryl)imide and hexamethyldisilazane – with or without solvent – the authors obtain two phases. The solid phase is the ammonium salt of the bis(dichlorophosphoryl)imide which can be obtained, like many other metallic salts of this type, by the general reaction: . The salt is characterized by its I.R., and ³¹P, ¹H, and ¹⁴N N.M.R. spectra and by its hydrolysis reaction. The composition of the liquid phase changes according the experimental conditions. It seems that at first the main components are Cl₂(O)P? N?P(OSiMe₃)Cl₂ and Cl₂(Me₃SiO)P?N? PCl(OH)NSiMe₃. These compounds condense further to high polymers.     

Mixed ligand complexes in vinyl polymerization—II: [NN′-ethylenebis(salicylideneiminato)] (benzoylacetonato)cobalt(III) as an initiator

The polymerization of methyl methacrylate initiated by a mixed ligand complex. [NN′-ethylenebis(salicylideneiminato)](benzoylacetonato)cobalt(III) has been studied in bulk and in benzene at 70° and 80°. The rate of polymerization is proportional to (concentration of the chelate)${}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ and the monomer exponent is close to 1.5. The activation energy and the kinetic and transfer constants are evaluated. A free radical mechanism has been proposed.