Model for heat conduction in nanofluids

A comprehensive model has been proposed to account for the large enhancement of thermal conductivity in nanofluids and its strong temperature dependence, which the classical Maxwellian theory has been unable to explain. The dependence of thermal conductivity on particle size, concentration, and temperature has been taken care of simultaneously in our treatment. While the geometrical effect of an increase in surface area with a decrease in particle size, rationalized using a stationary particle model, accounts for the conductivity enhancement, a moving particle model developed from the Stokes-Einstein formula explains the temperature effect. Predictions from the combined model agree with the experimentally observed values of conductivity enhancement of nanofluids.     

Where is the shot noise of a quantum point contact?

Reznikov et al. [Phys. Rev. Lett. 75, 3340 (1995)]] have presented definitive observations of nonequilibrium noise in a quantum point contact. Especially puzzling is the "anomalous" peak structure of the excess noise measured at constant current; to date it remains unexplained. We show that their experiment directly reveals the deep link between conservation principles in the electron gas and its low-dimensional, mesoscopic behavior. The keys to that connection are gauge invariance and the compressibility sum rule. These are central not only to the experiment of Reznikov et al., but to the very nature of all mesoscopic transport.     

Structural study and electrical properties of Zr-doped Nd<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> pyrochlore compounds

Nd₂Sn₂O₇ pyrochlores with the substitution of Zr⁴⁺ were prepared by conventional ceramic double sintering technique. The single-phase formation was confirmed by X-ray diffraction and neutron diffraction techniques. Relative intensity calculations for X-ray diffraction analysis were performed for oxygen positional parametersx = 0.331 and 0.375, while Rietveld refinements were employed for neutron diffraction data. The neutron diffraction study revealed that there are only two anion sites with 48f and 8b positions. This indicates that the 8a site, i.e. O(3) sublattice, is completely vacant and the structure is a perfect cubic pyrochlore with space group Fd3m (O _h ⁷ ). From the conductivity measurements, it is observed that the electronic conductivity dominates from room temperature up to about 525 K and forT > 525 K, the oxygen ion conduction dominates the charge transport in these compositions. Complex impedance spectroscopy indicates the existence of grain and grain boundary as two separate elements.     

Note on the surface wave due to the prescribed elevation

In the present paper, a study of the deep-sea water wave caused by an oscillatory wind stress due to the atmospheric depression, resulting in spiral cyclonic wind pressure on the surface of the sea is made. It has been observed that the motion of the water wave in the case of wind stress exhibits a greater elevation on the sea surface asg the acceleration due to gravity decreases and maintains the oscillatory nature with the increase of time. For the case of spiral cyclonic motion for which the sea surface experiences the elliptical pressure on the surface, the motion diminishes asg diminishes and oscillates with the variation of time. The motion also diminishes asymptotically as the radius vector of the elliptical pressure approaches unity.     

Temperature dependent structural and optical properties of nanocrystallineCdO thin films deposited by sol–gel process

Nanocrystallites of cadmium oxide (CdO) thin films were deposited by sol–gel dip coating technique on glass and Si substrates. XRD and TEM diffraction patterns confirmed the nanocrystalline cubic CdO phase formation. TEM micrograph of the film revealed the manifestation of nano CdO phase with average particle size lying in the range 1.6–9.3 nm. UV–Vis spectrophotometric measurement showed high transparency (nearly 75% in the wavelength range 500–800 nm) of the film with a direct allowed bandgap lying in the range 2.86–3.69 eV. Particle size has also been calculated from the shift of bandgap with that of bulk value for the films for which the particles sizes are comparable to Bohr exitonic radius. The particle size increases with the increase in annealing temperature and also the intensity of XRD peaks increases which implies that better crystallinity takes place at higher temperature.This revised version was published online in August 2005 with a corrected issue number.     

Simultaneous Determination of Acetylsalicylic Acid and Caffeine in Pharmaceutical Formulation by First Derivative Synchronous Fluorimetric Method

A sensitive, rapid, and specific assay has been developed for the simultaneous determination of acetylsalicylic acid and caffeine in commercial tablets based on their natural fluorescence. The mixture of these drugs was resolved by first derivative synchronous fluorimetric technique using two scans. At Δλ=106 nm, using first derivative synchronous scanning, only acetylsalicylic acid yields a detectable signal at 316 nm (peak to zero method) which is unaffected by caffeine. At Δλ=30 nm, the signal of caffeine at 288 nm (peak to zero method) is not affected by acetylsalicylic acid. The range of application is between 0.021 and 41.62 μg ml⁻¹ (correlation coefficient, R=0.9995) for acetylsalicylic acid and between 0.4486 and 44.86 μg ml⁻¹ (correlation coefficient, R=0.99786) for caffeine. The recovery range of 98.40–102% for acetylsalicylic acid and 90–100.5% for caffeine from their synthetic mixture was reported. Overall recovery of both compounds about 97–99% for acetylsalicylic acid and 97–98% for caffeine was obtained from real sample analysis. The detection limits are 0.0013 μg ml⁻¹ and 0.0306 μg ml⁻¹ for acetylsalicylic acid and caffeine, respectively. The relative standard deviation (n=10) for 20 μg ml⁻¹ of acetylsalicylic acid is 2.75% and for 2.2 μg ml⁻¹of caffeine is 1.7%.     

Effect on ion dissociation in MWCNT-based polymer nanocomposite

Polymer nanocomposite has been proven to improve the property of polymer salt complex. Organo-modified clay and inorganic oxides are the most commonly used filler for polymer nanocomposite (PNC). However, single wall carbon nanotube (SWCNT)/multiwall carbon nanotube (MWCNT) are becoming popular filler for PNC for their high surface area and high mechanical stability. In this work, a series of PNC sample has been prepared by using polyethylene oxide (PEO)-polydimethylsiloxane (PDMS) blend as polymer matrix, an optimized salt stoichiometry of Ö/Li ~15, and surface-modified MWCNT as filler. The effect of ion-polymer and ion-MWCNT interaction in the polymer nanocomposite has been investigated by using XRD, SEM, FTIR, and electrical study. X-ray diffraction pattern confirms the dispersion of MWCNT inside the polymer chain and modifies the structural parameter of the polymer matrix. FTIR spectra indicate inclusion of MWCNT inside the polymer salt complex which changes the ion dissociation/association in the polymer host matrix. Further, the changes in structural, thermal, and electrical property of the polymer salt complex system have been studied by using SEM, DSC, and impedance analysis. Dc conductivity study shows that optimized PNC sample has conductivity of 8.04 × 10⁻⁵ S cm⁻¹. This is almost two order enhancement from pure polymer salt system (10⁻⁶ S cm⁻¹).

     

An interactive graphical user interface (GUI) for the CATGIXRF program – for microstructural evaluation of thin film and impurity doped surfaces

This paper is a continuation and extension of our earlier work (X‐ray Spectrom. 2010 , 39, 127–134, DOI:10.1002/xrs.1215) on the development of a software platform CATGIXRF, as a solution to provide non‐destructive evaluation of nanostructured materials. Here, we describe an interactive graphical user interface (GUI) for the CATGIXRF program. The newly developed GUI interface facilitates determination of microstructural parameters on angstrom length scale for the nanostructured thin layered materials using synchrotron as well as laboratory X‐ray sources. It allows combined analysis capabilities for both the X‐ray reflectivity and grazing incidence X‐ray fluorescence (GIXRF) data simultaneously, thus enabling us a greater sensitivity for the determination of microstructural parameters such as thickness, interface mixing, and roughness of a thin film medium with improved accuracies. The utility and various newly added salient features of the GUI‐CATGIXRF program are described by providing example calculations as well as by analyzing experimentally a few thin film structures with different surface‐interface properties. Copyright © 2016 John Wiley & Sons, Ltd.