Effects of carbon sources and carbon contents on the electrochemical properties of LiFePO4/C cathode material

LiFePO₄/C composites are prepared by using two types of carbon source: one using polymer (PAALi) and the other using sucrose. The physical characteristics of LiFePO₄/C composites are investigated by X-ray diffraction), scanning electron microscopy, BET, laser particle analyzer, and Raman spectroscopy. Their electrochemical properties are characterized by cyclic voltammograms, constant current charge–discharge, and electrochemical impedance spectra. These analyses indicate that the carbon source and carbon content have a great effect on the physical and electrochemical performances of LiFePO₄/C composites. An ideal carbon source and appropriate carbon content can effectively increase the lithium-ion diffusion coefficient and exchange current density, decrease the charge transfer resistance (R _ct), and enhance the electrochemical performances of LiFePO₄/C composite. The results show that PAALi is a better carbon source for the synthesis of LiFePO₄/C composites. When the carbon content is 4.11 wt.% (the molar ratio of PAALi/Li₂C₂O₄ was 2:1), as-prepared LiFePO₄/C composite shows the best combination between electrochemical performances and tap density.     

Calorimetric Studies on Enthalpy Relaxation in Maltitol Glass Transition Based on Phenomenological Models

To investigate the enthalpy relaxation behavior of maltitol glass system, differential scanning calorimetry (DSC) was used to obtain the specific heat capacity[C_p(T)] near the glass transition temperature(T_g) at different coo- ling rates ranged between 1 and 20 K/min. Three phenomenological models of enthalpy relaxation, Tool-Narayanaswamy-Moynihan(TNM) model, Adam-Gibbs-Vogel(AGV) model and Gómez Ribelles(GR) model, were used to simulate the experimental data. The models’ parameters were obtained via a curve-fitting method. The results indicate that TNM and AGV models gave the almost identical prediction powers and can reproduce the curves of experimental C_p(T) very well. However, the prediction power of GR model evolved from configurational entropyapproach is not so good as those of TNM and AGV models. In particular, the metastable limit state parameter(δ) introduced by Gómez Ribelles has insignificant effect on the enthalpy relaxation of the small molecular hydrogen-bonding glass system.     

FeZSM-5/N2O催化氧化苯制苯酚

苯一步氧化制苯酚,是有机物氧化合成中富有挑战性的研究课题之一。该文着重论述了在FeZSM-5及其一系列沸石催化剂上,应用氧化亚氮作为氧化剂使苯直接氧化制苯酚的研究进展。这一系列催化剂体系的特殊之处在于通过氧化亚氮在沸石分子筛上的分解获得具有催化活性的a－氧。详细讨论了在沸石分子筛上形成特殊结构的铁氧化物作为催化活性中心这一观点。由于这种催化体系对苯直接氧化制苯酚的反应有着很高的选择性,因此,这种比较经济和安全的制备苯酚的方法引起了人们的广泛关注。     

苯酚和草酸二甲酯在不同分子筛催化下的酯交换反应

研究了以TS－1、H－ZSM－5、Hβ和H－丝光沸石等不同分子筛为催化剂，苯酚和草酸二甲酯酯交换合成草酸二苯酯反应。通过对催化剂进行吸附吡啶的红外光谱和NH3－TPD表征，考察了不同分子筛催化剂的酸性和酸强度对草酸二苯酯合成反应的影响，确定了催化剂上的弱酸中心是催化苯酚和草酸二甲酯酯交换合成草酸二苯酯反应的活性位，且催化剂的酸性中心越多，酸量越大，催化活性越好。催化剂上的强酸中心促进了副产物苯甲醚的生成。     

咪喹莫特的波谱学数据与结构表征

对咪喹莫特的红外(IR)、紫外(UV)、质谱(MS)、氢-氢相关谱(^1H--^1H COSY)、碳氢相关谱(HMQC)、碳氢远程相关谱(HMBC)予以解析并进行了报道。对所有的^1H NMR、^13C NMR谱的信号进行了归属；讨论了质谱的主要碎片离子的可能的裂解方式和红外特征吸收峰所对应的官能团的振动形式。     

ZrO_2、TiO_2担载氧化铁催化剂上二氧化碳加氢制低碳烃(英文)

采用创新方法制备的ZrO2、TiO2担载氧化铁催化剂在二氧化碳加氢制低碳烃反应中显示出良好的催化活性和产物选择性,由15wt?/ZrO2给出的最佳结果为：CO2转化率为20%,除甲烷以外的低碳烃的选择性接近70%。还考察了金属Fe担载量及催化剂的预还原温度对催化活性的影响,发现催化活性随金属Fe担载量的增加而呈现“双峰”现象,这种现象可能与活性物种(零价铁及配位不饱和的三价或二价铁)在催化剂表面的几何排布有关,而两种催化剂的最佳还原温度分别为723 K(5wt?/ZrO2)和773 K(5wt?/TiO2)。     

Activation of bismuth(III) derivatives in ionic liquids: novel and recyclable catalytic systems for Friedel-Crafts acylation of aromatic compounds

The activity of four bismuth(III) derivatives when employed as Friedel-Crafts catalysts for the acylation of aromatics was found to increase dramatically when dissolved in ionic liquids. Solutions of bismuth oxide or triflate in [emim][NTf(2)] and [bmim][NTf(2)] are the most efficient catalytic systems, with catalyst loading as low as 1% leading to clean, high-yielding acylation of a variety of benzene derivatives. These improved Friedel-Crafts catalytic systems can also be efficiently recycled as opposed to traditional systems. [reaction: see text]     

Ionic liquid-regulated sulfamic acid: chemoselective catalyst for the transesterification of β-ketoesters

1-Propyl-3-methylimidazolium chloride ([C₃MIm]Cl) ionic liquid and sulfamic acid (NH₂SO₃H), as a synergetic catalytic medium, were used for the transesterification of acetoacetate with alcohols of different structures. It shows the good ability for the chemoselective transesterificatin of β-ketoesters and maintains its catalytic activity in the reuse.     

Separation and determination of aloperine, sophoridine, matrine and oxymatrine by combination of flow injection with microfluidic capillary electrophoresis

A novel, rapid and accurate method for the separation and determination of aloperine (ALP), sophoridine (SRI), matrine (MT) and oxymatrine (OMT) has been developed by combination of flow injection (FI) with microfluidic capillary electrophoresis (CE) for the first time. In the present paper, a continuous sample introduction interface was described. The interface with an H-channel structure was produced using a non-lithographic approach. The H-channel structure was fixed on a planar plastic base utilizing a horizontal 6.5 cm-long separation capillary with two vertical sidearm tubes on each end that served as inlet and outlet flow-through electrode reservoirs. The inlet reservoir also functioned as interface for coupling to the FI system. The buffer solution used was a 50 mmol l⁻¹ borate solution with the pH adjusted to 8.80 with 2 mol l⁻¹ HCl. The performance of the system was demonstrated in the separation and determination of ALP, SRI, MT and OMT with UV detection at 215 nm, achieving baseline separation within 2 min. A series of samples was injected repeatedly without current interruption and subsequent rinsing, and the contents of these four bio-alkaloids in two marketed drugs were determined with satisfactory recovery by this proposed method.     

Shear‐Controlled Micro/Nanometer‐Scaled Super‐Hydrophobic Surfaces with Tunable Sliding Angles from Single Component Isotactic Poly(propylene)

Summary: With the proper selection of shear and thermal conditions, super‐hydrophobic polymeric surfaces (contact angle > 150°) with tunable sliding angles (from less than 1° to higher than 90°) can be prepared from pure isotactic poly(propylene) (iPP) without any further modification with low‐surface‐energy components under ambient atmosphere. The formed surfaces have naturally good thermal properties, chemical and moisture resistance, low density, and potentially low manufacturing cost.

SEM images of formed super‐hydrophobic surfaces and related two extreme sliding angles (contact angles of these surfaces are higher than 150°).