Streamlined construction of peptide macrocycles via palladium-catalyzed intramolecular S-arylation in solution and on DNA

A highly efficient and versatile method for construction of peptide macrocycles via palladium-catalyzed intramolecular S-arylation of alkyl and aryl thiols with aryl iodides under mild conditions is developed. The method exhibits a broad substrate scope for thiols, aryl iodides and amino acid units. Peptide macrocycles of a wide range of size and composition can be readily assembled in high yield from various easily accessible building blocks. This method has been successfully employed to prepare an 8-million-membered tetrameric cyclic peptide DNA-encoded library (DEL). Preliminary screening of the DEL library against protein p300 identified compounds with single digit micromolar inhibition activity.

A highly efficient and versatile method for construction of peptide macrocycles via palladium-catalyzed intramolecular S-arylation of alkyl and aryl thiols with aryl iodides under mild conditions is developed.     

Water-in-salt widens the electrochemical stability window: Thermodynamic and kinetic factors

Originating from the 1.23 V potential window of pure water, the narrow electrochemical stability window (ESW) has always been the most stubborn problem for aqueous battery systems. However, the water-in-salt system magically widens the ESW of aqueous electrolyte from 1.23 V to above 3 V by the super-concentrated LiTFSI solution. The mechanisms of widening aqueous battery ESW have been a crucial topic, in which the significant factors, including unique solid–electrolyte interface, solvation structure, and others, have been highlighted. Here, we specify the concept of ESW in detail and review the influence factors of ESW in the water-in-salt system from both thermodynamic and kinetic perspectives to explore the importance of each factor.     

超临界流体技术在制备药物输送系统中的应用

超临界流体技术以其特有的优点成为引人注目的制备药物细微粒子及控制释放的药物输送系统的方法。本文介绍了超临界流体沉淀技术的概念、进展及相关的应用。     

生物降解高分子——聚己内酯/聚氧乙烯/聚丙交酯三元共聚物水解行为的研究

以异辛酸亚锡为催化剂 ,通过聚乙二醇醚 (PEG)引发ε 己内酯和L 丙交酯开环聚合 ,制备了PCL/PEO/PLA三元共聚物 .研究了聚合物在 pH7 4磷酸缓冲溶液、37℃条件下的体外降解行为 .采用GPC、1H NMR、DSC和XRD技术研究了聚合物在水解降解过程中分子量、分子量分布、组成、吸水率、结晶性等的变化 .结果表明共聚物的吸水率随聚醚组分含量而增大 ;随水解材料的失重率增大 ,聚醚组分含量下降程度也加大 .此外研究还表明 :聚合物中丙交酯组分含量高时 ,聚合物的结晶结构主要由PLLA形成 .由于聚合物的水解降解首先发生在无定形区和结晶区边缘 ,随着共聚物的降解、结晶性的PLLA低聚物的生成 ,导致了共聚物的分子量呈双峰分布     

Analysis of Five Pharmacologically Active Compounds from Rhodiola for Natural Product Drug Discovery with Capillary Electrophoresis

A rapid capillary electrophoresis method for the separation of five natural pharmacologically active compounds from extracted Rhodiola, namely salidroside, tyrosol, rhodionin, gallic acid and ethyl gallate has been developed. The separation of five natural pharmacologically active compounds was carried out in a fused-silica capillary with 14 mM boric acid, 30 mM SDS and 2.5% acetonitrile, adjusted to pH 10.7 with NaOH. Applied potential was 21kV. The temperature of the capillary was maintained at 25 °C by the instrument thermostating system, with the correlation coefficients of 0.9805–0.9989 for migration time, and relative standards of < 3.52% for peak areas. The established method is rapid and reproducible for the separation of five natural pharmacologically compounds from extracts of Rhodiola with satisfactory results.     

Capture efficiency of Escherichia coli in fimbriae-mediated immunoimmobilization

Capturing pathogens on a sensor surface is one of the most important steps in the design of a biosensor. The efficiency of a biosensor at capturing pathogens has direct bearing on its sensitivity. In this work we investigated the capturing of Escherichia coli on substrates modified with antibodies targeting different types of fimbriae: K88ab (F4), K88ac (F4), K99 (F5), 987P (F6), F41, and CFA/I. The results suggest that all these fimbriae can be used for the efficient immobilization of living E. coli cells. The immobilization efficiency was affected by the purity and clone type of the antibody and the fimbriae expression level of the bacteria. For a specific fimbriae type, a higher immobilization efficiency was often observed with the monoclonal antibodies. Immunoimmobilization was utilized in an antibody microarray immersed in a mixed culture of pathogens to demonstrate the rapid and simultaneous label-free detection of multiple pathogens within less than 1 h using a single test. The capture rate of living pathogens exceeds a single bacterium per 100 × 100 μm(2) area per 0.5 h of incubation for a bulk concentration of 10(5) cfu/mL.     

Aryne [3 + 2] cycloaddition with N-sulfonylpyridinium imides and in situ generated N-sulfonylisoquinolinium imides: a potential route to pyrido[1,2-b]indazoles and indazolo[3,2-a]isoquinolines

The aryne [3 + 2] cycloaddition process with pyridinium imides breaks the aromaticity of the pyridine ring. By equipping the imide nitrogen with a sulfonyl group, the intermediate readily eliminates a sulfinate anion to restore the aromaticity, leading to the formation of pyrido[1,2-b]indazoles. The scope and limitation of this reaction are discussed. As an extension of this chemistry, N-tosylisoquinolinium imides, generated in situ from N'-(2-alkynylbenzylidene)-tosylhydrazides via an AgOTf-catalyzed 6-endo-dig electrophilic cyclization, readily undergo aryne [3 + 2] cycloaddition to afford indazolo[3,2-a]-isoquinolines in the same pot, offering a highly efficient route to these potential anticancer agents.     

Determination of Lead(II) Using Screen‐Printed Bismuth‐Antimony Film Electrode

This work presents a disposable bismuth‐antimony film electrode fabricated on screen‐printed electrode (SPE) substrates for lead(II) determination. This bismuth‐antimony film screen‐printed electrode (Bi‐SbSPE) is simply prepared by simultaneously in situ depositing bismuth(III) and antimony(III) with analytes on the homemade SPE. The Bi‐SbSPE can provide an enhanced electrochemical stripping signal for lead(II) compared to bismuth film screen‐printed electrodes (BiSPE), antimony film screen‐printed electrodes (SbSPE) and bismuth‐antimony film glassy carbon electrodes (Bi‐SbGC). Under optimized conditions, the Bi‐SbSPE exhibits attractive linear responses towards lead(II) with a detection limit of 0.07 µg/L. The Bi‐SbSPE has been demonstrated successfully to detect lead in river water sample.     

Well‐Dispersed Pt Cubes on Porous Cu Foam: High‐Performance Catalysts for the Electrochemical Oxidation of Glucose in Neutral Media

The investigation of highly efficient catalysts for the electrochemical oxidation of glucose is the most critical challenge to commercialize nonenzymatic glucose sensors, which display a few attractive superiorities including the sufficient stability of their properties and the desired reproducibility of results over enzyme electrodes. Herein we propose a new and very promising catalyst: Pt cubes well‐dispersed on the porous Cu foam, for the the electrochemical oxidation reaction of glucose in neutral media. The catalyst is fabricated in situ on a homemade screen‐printed carbon electrode (SPCE) substrate through initially synthesizing the three‐dimensional (3D) porous Cu foam using a hydrogen evolution assisted electrodeposition strategy, followed by electrochemically reducing the platinic precursor simply and conveniently. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) proofs demonstrate that Pt cubes, with an average size (the distance of opposite faces) of 185.1 nm, highly dispersed on the macro/nanopore integrated Cu foam support can be reproducibly obtained. The results of electrochemical tests indicate that the cubic Pt‐based catalyst exhibits significant enhancement on the catalytic activity towards the electrooxidation of glucose in the presence of chloride ions, providing a specific activity 6.7 times and a mass activity 5.3 times those of commercial Pt/C catalysts at ?0.4 V (vs. Ag/AgCl). In addition, the proposed catalyst shows excellent stability of performance, with only a 2.8 % loss of electrocatalytic activity after 100 repetitive measurements.