Computerized quantification of carotid artery stenosis using MRA axial images

Currently, the North American symptomatic carotid endarterectomy trial, European carotid surgery trial, and common carotid method are used to measure the carotid stenosis for determining candidates for carotid endarterectomy using the projection angiography from different modalities such as digital subtraction angiography, rotational angiography, computed tomography angiography and magnetic resonance angiography. A new computerized carotid stenosis measuring system was developed using MR angiography axial image to overcome the drawbacks of conventional carotid stenosis measuring methods, to reduce the variability of inter-observer and intra-observer. The gray-level thresholding is one of the most popular and efficient methods for image segmentation. We segmented the carotid artery and lumen from three-dimensional time-of-flight MRA axial images using gray-level thresholding technique. Using the measured intima-media thickness value of common carotid artery for each case, we separated carotid artery wall from the segmented carotid artery region. After that, the regions of segmented carotid without artery wall were divided into region of blood flow and plaque. The calculation of carotid stenosis degree was performed as follows: carotid stenosis grading = (area measure of plaque/area measure of blood flow region and plaque) * 100%. No previous study has developed the carotid stenosis measuring method using MRA axial image. The new computerized stenosis measuring system has advantage over conventional caliper measuring methods; it will not only greatly increase the speed of stenosis measuring but also reduce the variability between readers. It should also reduce the variability between different institutions.     

Observation of mechanical fracture and corresponding domain structure changes of polycrystalline PbTiO3 nanotubes

PbTiO₃ (PTO) nanotubes (NTs) were synthesized at various temperatures by gas phase reaction between PbO gas and anatase TiO₂ NTs and characterized by piezoresponse force microscopy (PFM). PTO ferroelectric phase was synthesized at as low as 400 °C as evidenced by PFM domain images and piezoresponse hysteresis loop measurement. Furthermore, the PTO NTs fabricated at above 500 °C underwent mechanical fracture through development of nanocracks due to grain growth, leading to ferroelectric domains with larger size and lower aspect ratio. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Enhanced cleaning of photoresist film on a transparent substrate by backward irradiation of a Nd:YAG laser

Laser cleaning of a photoresist (PR) on a glass substrate using ns-pulsed Nd:YAG laser was studied. The direction of the substrate facing the laser beam was varied as a main parameter as well as the power of the laser beam. The backward irradiation (BWI) of the third harmonic beam (355 nm) completely removed 1.2 μm thick PR layer with three pulses at 1.5 J/cm² leaving no residues behind; while the forward irradiation (FWI) at the same condition just partially cleaned it. To investigate the difference of removal mechanisms between irradiation directions, the size distributions of particulates generated during laser cleaning were observed using an optical particle counter. The concentration of micron-sized particulates increased with increasing laser fluence up to 1 J/cm² for FWI and 0.5 J/cm² for BWI and then decreased at higher fluences because the target was a very thin film. The concentration of larger particulates for BWI was much higher than that for FWI implying the difference in removal mechanisms. In consideration of the size characteristics of the particulates and the temperature profiles of the PR layer, the most probable distinct mechanism for the BWI would be a blasting due to high temperature at the PR/glass interface. The particulate number concentration decreased rapidly after the completion of cleaning, suggesting that the measurement of the particulate concentration could detect the progress of the cleaning. Our results demonstrated that the backward irradiation will be useful for the laser cleaning of film-type contaminants on an optically transparent substrate.     

Analysis of Quantum Rod Diffusion by Polarized Fluorescence Correlation Spectroscopy

To measure the polarization dependence of fluorescent probes, a confocal-microscope-based polarized fluorescence correlation spectroscopy system was developed, and the polarization dependence on the rotational diffusion of well-defined quantum rods (Qrods) was investigated and characterized. The rotational diffusion region of the Qrods was observed over a time range of less than 10^?5 s in a water solution, and the rotational diffusion parameters were extracted using a rotational diffusion model in which the viscosity of the solution media was varied. Our work demonstrated that polarized fluorescence correlation spectroscopy (FCS) is useful for investigating both the rotational and translational diffusion of fluorescent probes.     

Misalignment tolerance analysis and fabrication for highly efficient parallel optical-electrical convertor module

A compact, highly efficient, and passively assembled parallel optical-electrical convertor module (POECM) for active optical cable application is proposed. This paper presents our POECM structure, optical design simulation results, fabrication process, and data transmission test results, in sequence. The POECM has a compact size of \(18.5\hbox {mm} \times 10\hbox {mm} \times 2.8\hbox {mm}\) . We confirm a data rate of total throughput at 21.6 Gbps ( \(5.4\hbox {Gbps} \times 4\) channels) with a bit error rate of less than \(10^{-12}\) .     

Nonequilibrium quantum criticality in open electronic systems

A theory is presented of quantum criticality in open (coupled to reservoirs) itinerant-electron magnets, with nonequilibrium drive provided by current flow across the system. Both departures from equilibrium at conventional (equilibrium) quantum critical points and the physics of phase transitions induced by the nonequilibrium drive are treated. Nonequilibrium-induced phase transitions are found to have the same leading critical behavior as conventional thermal phase transitions.     

Micro-vibration model and parameter estimation method of a reaction wheel assembly

Reaction wheel assemblies (RWAs) are a source of disturbance in satellites, and they are regarded as the largest jitter contributor in optical payloads. In order to ensure a stringent jitter requirement, the wheel disturbance effects on spacecraft should be predicted precisely prior to launch through analytical or experimental approaches. For this purpose, the wheel disturbance should be identified and modeled accurately. In the present study, a micro-vibration model of the RWA is introduced through coupling an analytical wheel model and an empirical disturbance model; furthermore, a parameter estimation process of the coupled model from the micro-vibration disturbance data is proposed. In order to verify the modeling and estimation techniques, a micro-vibration model of a numerical RWA is established and its estimation error is validated. Then, the micro-vibration model is extended to consider an axial disturbance and a measurement offset effect. Finally, the micro-vibration model is applied to a commercial RWA and the model parameters are extracted from the disturbance test data of the RWA using the parameter estimation process. The analytical and experimental results demonstrate that the proposed micro-vibration model and parameter estimation process are effective in the dynamic disturbance modeling of RWAs.     

Magnetic order and spin dynamics in ferroelectric HoMnO3

Hexagonal HoMnO3 is a frustrated antiferromagnet (T(N)=72 K) ferroelectric (T(C)=875 K) in which these two order parameters are coupled. Our neutron measurements of the spin-wave dispersion for the S=2 Mn3+ on the layered triangular lattice are well described by a two-dimensional nearest-neighbor Heisenberg exchange J=2.44 meV, and an anisotropy D that is 0.28 meV above the spin-reorientation transition at 40 K and 0.38 meV below. For H parallel c the magnetic structures and phase diagram have been determined, and reveal additional transitions below 8 K where the ferroelectrically displaced Ho3+ ions are ordered magnetically.     

Effects of annealing conditions on the electrical properties of Bi4-xNdxTi3O12 (x = 0.46) thin films processed at low temperature

Neodymium-substituted Bi₄Ti₃O₁₂ (BNdT) thin films were prepared by a chemical solution deposition technique on platinum- coated silicon substrates. All of the samples were annealed at the relatively low temperature of 600 °C by a rapid thermal annealing process in different atmospheres, such as O₂, air, and nitrogen, and vacuum. Irrespective of different annealing atmospheres, all of the BNdT thin films exhibit good ferroelectric properties, such as a saturated hysteresis loop, good fatigue endurance, and low leakage current density. A large remanent polarization (P_r) of ∼48 μC/cm² with an electric field of 240 kV/cm was observed from the BNdT thin film annealed in O₂ atmosphere. The BNdT thin films annealed in nitrogen and vacuum, at reduced oxygen partial pressures, exhibit smaller P_r than that annealed in oxygen. The difference of P_r of the BNdT thin films annealed in different atmospheres may originate from differences in the grain sizes and the number of oxygen vacancies. PACS 77.55.+f; 77.80.-e; 77.80.Fm; 81.15.-z     

A voltage-controlled chaotic oscillator based on carbon nanotube field-effect transistor for low-power embedded systems

This paper presents a compact and low-power-based discrete-time chaotic oscillator based on a carbon nanotube field-effect transistor implemented using Wong and Deng＇s well-known model. The chaotic circuit is composed of a nonlinear circuit that creates an adjustable chaos map, two sample and hold cells for capture and delay functions, and a voltage shifter that works as a buffer and adjusts the output voltage for feedback. The operation of the chaotic circuit is verified with the SPICE software package, which uses a supply voltage of 0.9 V at a frequency of 20 kHz. The time series, frequency spectra, transitions in phase space, sensitivity with the initial condition diagrams, and bifurcation phenomena are presented. The main advantage of this circuit is that its chaotic signal can be generated while dissipating approximately 7.8 μW of power, making it suitable for embedded systems where many chaos-signal generators are required on a single chip.