In situ transmission electron microscopy study of the nucleation and grain growth of Ge2Sb2Te5 thin films

The nucleation and grain growth of the Ge₂Sb₂Te₅ (GST) thin films were studied using high voltage electron microscope operated at 1250 kV. As a result, we have found that 2 nm-sized nucleus forms as a cluster which atoms are arranged regularly at the stage of nucleation prior to the formation of grains having crystal structure. The high-resolution transmission electron microscopy study and fast-Fourier transformations revealed that coexistence of face-centered-cubic (FCC) and hexagonal structure occurs, and formation of twin defect is found in the hexagonal structure during the grain growth as the annealing temperature is increased. GST grain having the hexagonal structure grow from the surface, and the growth proceeded perpendicular to the [0 0 0 1], namely the path parallel to the (0 0 0 1) plane. Consequently, grain growth to a large-scale result in a lengthened shape.     

Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.     

Beam Combination using Stimulated Brillouin Scattering for the Ultimate High Power-Energy Laser System Operating at High Repetition Rate over 10 Hz for Laser Fusion Driver

After the laser was invented in 1960, a phase conjugation mirror has been respected to be the most fantastic one for the laser resonator composition because it can compensate any distortions of the laser beams occurred by the many inhomogenuities of the laser media and optical components. Among the many phase conjugation configurations, the stimulated Brillouin scattering phase conjugation mirror is the most simple one and many researchers have tried to utilize it to develop high power/energy laser systems. For realizing a high energy/power laser system the thermal problem is the most difficult to solve, and some researchers suggested a beam combination technique to reduce the thermal load of the big laser media to many small sized ones. To accomplish the beam combination using stimulated Brillouin scattering phase conjugation mirrors (SBS-PCMs), it is necessary to lock/control the phases of the SBS-PCMs. And some researchers have developed several ways for it, but they can lock the phases of a limited number of beams overlapped at the foci less than 5, or lock the phases by back-seeding technique but it loses the phase conjugation characteristics. For realization of the laser fusion driver, it is necessary to combine more than 10 or 100 beams. And the authors have developed recently a new phase controlling/locking technique which is isolated and independent totally from other beams and it can be applied to an unlimited number of beams in principle.     

Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

Tristimulus colorimetry using a digital still camera and its application to determination of iron and residual chlorine in water samples.

Tristimulus colorimetry using a digital still camera (DSC) as a colorimeter has been developed. A photograph of a sample and standard solutions was taken simultaneously with the DSC, and it was transferred to a PC. On the PC, the colors of the sample and of the standard solutions were analyzed and L* (brightness), a* (red-green component), and b* (yellow-blue component) values were determined with laboratory-made software. A dedicated light-box containing white-color LEDs as light source was made of white acrylic to make constant exposure at each photograph. Various settings of the DSC, such as exposure mode, white balance, and so on, that affect analytical figures, were studied with determination of iron with 1,10-phenanthroline. This method was successfully applied to the determinations of iron in a river water sample and of residual chlorine in tap water samples with N,N-diethylphenylenediamine (DPD).     

Local chemical distribution and electronic structure of Ge1−xTx DMS single crystals (T=Cr,Mn, Fe)

The spatial concentration distribution and local electronic structure of ferromagnetic Ge_1−xT_x (T=Cr, Mn, Fe) DMS single crystals have been investigated by using scanning photoelectron microscopy (SPEM), X-ray absorption spectroscopy (XAS), and photoemission spectroscopy (PES). It is found that doped T ions in Ge_1−xT_x crystals are chemically phase-separated, suggesting that the observed ferromagnetism arises from the phase-separated T-rich phases in Ge_1−xT_x.     

Model and empirical study on some collaboration networks

In this paper we present an empirical study of a few practical systems described by cooperation networks, and propose a model to understand the results obtained. We study four non-social systems, which are the Bus Route Networks of Beijing and Yangzhou, the Travel Route Network of China, Huai-Yang recipes of Chinese cooked food, and a social system, which is the Collaboration Network of Hollywood Actors. In order to explain the results related to the degree distribution, act-degree distribution and act-size distribution (especially about the degree distribution, which may be better fitted using a stretched exponential distribution (SED)), we suggest a simple model to show a possible evolutionary mechanism for the emergence of such networks. The analytic and numerical results obtained from the model are in good agreement with the empirical results.     

男性型秃发患者发中K,Na,Ca,Mg元素含量分析

采用火焰原子吸收法对３０例男性型秃发患者及３８例毛发健康男性对照者发中宏量元素Ｋ、Ｎａ、Ｃａ、Ｍｇ的含量进行了测定。结果表明，男性型秃发患者发Ｋ含量明显高于对照组，具有统计学上的显著差异（Ｐ〈０．０１）。发Ｎａ、Ｃａ、Ｍｇ含量在两组间未见显著差异（Ｐ〉０．０５）。本文提示，体内某些宏量元素变化对男性型秃发可能产生一定影响。     

Single Atom Alloy Preparation and Applications in Heterogeneous Catalysis

There have been remarkable progresses in manipulating heterogeneous catalysts' nanostructures in the past decade. The concept of single atom alloy (SAA) was firstly proposed in 2012 when researchers successfully stabilized single Pd atoms on the Cu(111) surface. However, earlier work in 2009, which focused on replacing one Au atom with a Pd atom in thiolate protected Au₂₅ nanoclusters, could also be considered as the pioneer work of single atom alloy. Both kinds of single atom alloys exhibited the potential of maximum utilization of scarce elements and attractive catalytic performances. The well‐defined structures of SAA catalysts make accurate modeling possible, which further realizes the rational design of single atom alloy catalysts. In this review, we summarize the research trajectory of single atom alloys as well as recent achievements in this field. We also introduce several commonly adopted characterization methods for SAA catalysts such as scanning tunneling microscopy (STM), temperature programmed reaction (TPR), extended X‐ray absorption fine structure (EXAFS) spectra, matrix assisted laser desorption/ionization mass spectrum (MALDI‐MS) and differential pulse voltammetry (DPV). Through discussing recent progresses in SAA catalysts, we propose that future researches in this filed should be focused on exploring new kinds of metal nanocrystals and controlling the nanostructure of SAA even more precisely.