Influence of clay surface modification with urethane groups on the crystallization behavior of in situ polymerized poly(butylene succinate) nanocomposites

The crystallization behavior and fine structure of poly(butylene succinate) (PBS) nanocomposites with intercalation (30B20) and exfoliation (30BM20) morphologies, respectively, were investigated via isothermal crystallization testing and synchrotron small-angle X-ray scattering (SAXS). The dynamic viscosity of 30BM20 was markedly increased due to favorable interactions between the PBS matrix and the urethane group on the clay surface. However, 30BM20 showed similar crystallization rates to that of homo PBS because the surface urethane modification for 30BM20 precluded PBS matrix from the metallic group into clay to difficult in contact with each other, resulting in a reduced nucleation activity for the metallic group. SAXS profiles revealed that the long period and amorphous region size for 30B20 drastically decreased during isothermal crystallization. Meanwhile, 30BM20 was similar to those of homo PBS. This result also supports the above explanation for isothermal crystallization behavior. Considering all results in total, the introduction of a urethane modification considerably enhanced the physical properties of PBS but caused delayed crystallization rates.     

A multiresidue method for the determination 234 pesticides in Korean herbs using gas chromatography mass spectrometry

A rapid, specific and sensitive multiresidue method based on dispersive solid phase extraction sample preparation and gas chromatography with the mass spectrometric detection for the analysis of 234 pesticides in Korean herbs (Acanthopanax senticosus, Morus alba L., Hovenia dulcis) has been developed. Method recoveries were found to be between 62 and 119% with relative standard deviation lower than 21% for all compounds in the concentration range of 0.05 to 0.400 mg kg^? 1. Limits of quantification of most compounds are below 0.050 mg kg^? 1. The data demonstrate that this method was successfully used for analysis of 234 pesticides in Korean herbs.     

Measuring Submicron-Sized Fractionated Particulate Matter on Aluminum Impactor Disks

Sub-micron sized airborne particulate matter (PM) is not collected well on regular quartz or glass fiber filter papers. We used a micro-orifice uniform deposit impactor (MOUDI) to fractionate PM into six size fractions and deposit it on specially designed high purity thin aluminum disks. The MOUDI separated PM into fractions 56-100 nm, 100-180 nm, 180-320 nm, 320-560 nm, 560-1000 nm, and 1000-1800 nm. Since the MOUDI has a low flow rate (30 L/min), it takes several days to collect sufficient carbon on 47 mm foil disks. The small carbon mass (20-200 microgram C) and large aluminum substrate (~25 mg Al) present several challenges to production of graphite targets for accelerator mass spectrometry (AMS) analysis. The Al foil consumes large amounts of oxygen as it is heated and tends to melt into quartz combustion tubes, causing gas leaks. We describe sample processing techniques to reliably produce graphitic targets for (14)C-AMS analysis of PM deposited on Al impact foils.     

Probing the structure, stability and hydrogen storage properties of calcium dodecahydro-closo-dodecaborate

Calcium borohydride can reversibly store up to 9.6 wt% hydrogen; however, the material displays poor cyclability, generally associated with the formation of stable intermediate species. In an effort to understand the role of such intermediates on the hydrogen storage properties of Ca(BH₄)₂, calcium dodecahydro-closo-dodecaborate was isolated and characterized by diffraction and spectroscopic techniques. The crystal structure of CaB₁₂H₁₂ was determined from powder XRD data and confirmed by DFT and neutron vibrational spectroscopy studies. Attempts to dehydrogenate/hydrogenate mixtures of CaB₁₂H₁₂ and CaH₂ were made under conditions known to favor partial reversibility in calcium borohydride. However, up to 670 K no notable formation of Ca(BH₄)₂ (during hydrogenation) or CaB₆ (during dehydrogenation) occurred. It was demonstrated that the stability of CaB₁₂H₁₂ can be significantly altered using CaH₂ as a destabilizing agent to favor the hydrogen release.     

Solution-based TiO2-polymer composite dielectric for low operating voltage OTFTs

The cross-linking reaction of a TiO(2)-polymer composite (TPC) dielectric with poly(4-vinyl phenol) (PVP), a TiO(2) precursor, and poly(melamine-co-formaldehyde) is demonstrated: We suggest that the dense chemical structure of TPC is caused by the alkoxyl group of the PVP cross-linker, poly(melamine-co-formaldehyde) methylated/butylated, reacted with the hydroxyl group of the PVP and the ligands of the TiO(2) precursor.     

Quantification of oxyresveratrol analog trans-2,4,3',5'-tetramethoxystilbene in rat plasma by a rapid HPLC method: application in a pre-clinical pharmacokinetic study

A rapid HPLC method was developed and validated for the quantification of oxyresveratrol analog trans‐2,4,3′,5′‐tetramethoxystilbene (oxyresveratrol tetramethyl ether, OTE) in rat plasma. Chromatographic separation was achieved on an RP‐HPLC column, which was protected by a guard column through a 12 min gradient delivery of a mixture of acetonitrile–water at 50°C. The UV absorbance at 325 nm was recorded. The retention time of OTE and trans‐stilbene (internal standard) was about 7.7 and 8.4 min, respectively. The calibration curves were linear (R² ≥ 0.9986) with a lower limit of quantification of 15 ng/mL. The intra‐ and inter‐day variations, in terms of RSD, were all lower than 9.8% while the intra‐day and inter‐day bias ranged from ?8.3 to +9.2%. The pharmacokinetics of OTE was assessed in rats using 2‐hydroxypropyl‐β‐cyclodextrin as a dosing vehicle. After intravenous administration, OTE possessed a long terminal elimination half‐life (t_{1/2 λz} = 481 ± 137 min) and slow clearance (Cl = 29.1 ± 3.7 mL/min/kg). Upon oral administration, OTE was rapidly absorbed. However, it only displayed minimal plasma exposure and its absolute oral bioavailability (F) was as low as 4.5 ± 3.2%. Fortunately, the levels of OTE after single oral administration were sufficient to inhibit human cytochrome P450 1B1. Copyright © 2010 John Wiley & Sons, Ltd.     

Polymerase Chain Reaction-based Detection of Total and Specific Vibrio Species

The polymerase chain reaction (PCR) technique is widely used for efficient detection of food-borne pathogens because of speed and specificity. However, PCR methods have focused mostly on species-specific detection. In the present work, we describe a PCR-based method for the simultaneous detection of all Vibrio species because lots of them are notorious food-borne human pathogens. We then combined this total detection method with specific detection of Vibrio cholerae pathogen. Using a degenerate primer set based on the sequence of the potassium uptake gene, trkA, we were able to successfully detect all Vibrio species. Specific detection of V. cholerae was also possible using primer sets based on putative flagellin sequence. Importantly, simultaneous total and species-specific Vibrio detection was possible using all two primer sets in a multiplexed PCR strategy. Thus, the PCR method we have developed is applicable to both simultaneous and two-step detection of total and specific Vibrio species.     

Development of Batch and Continuous Processes on Biodiesel Production in a Packed-Bed Reactor by a Mixture of Immobilized Candida rugosa and Rhizopus oryzae Lipases

In this study, transesterification and esterification were investigated in batch and continuous process using immobilized Candida rugosa and Rhizopus oryzae lipases. In the case of batch process, stepwise reaction method was investigated to prevent the lipase deactivation. Reaction conditions were as follows: temperature, 45 °C; agitation speed, 250 rpm; enzyme concentration, 20%; and water contents 10%. And then, conversion yield was 98.33% at 4 h. In the case of continuous process, circulation and long-term continuous system were investigated for development of efficient mass transfer system. Optimal reaction conditions were as follows: temperature, 45 °C; flow rate, 0.8 mL/min; and water contents, 10%. And then, conversion yield of biodiesel was 97.98% at 3 h. Especially, the maximum conversion yield using a mixture of immobilized lipases exceeded over 90% for 108 h in long-term continuous system under optimal reaction conditions (45 °C; flow rate, 0.8 mL/min; and water contents, 10%). These results should help in determining the best method for the biodiesel production and improving the design and operation of large scale by enzymatic systems.