Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

Irradiation-induced reduction and luminescence properties of Sm doped in BaBPO5

Usually, Sm²⁺ ions could be reduced by heating the materials in reducing atmospheres. Exposure to ionizing radiations is also known to cause Sm³⁺→Sm²⁺ conversion. In this work, BaBPO₅ doped with the samarium ion was prepared by high temperature solid-state reaction. Sm²⁺ ions were obtained by two different reduction methods, i.e., heating in H₂ reduced atmosphere and X-ray irradiation. The measurements of X-ray diffraction (XRD), and scanning electron microscope (SEM) were investigated. It is found that the conversion of Sm³⁺→Sm²⁺ is very efficient in BaBPO₅ hosts after X-ray irradiation. Sm²⁺ ions under these two reduction methods exhibit different characteristics that were studied by measurements of luminescence and decay. The results showed that the luminescence properties of Sm²⁺ ions in BaBPO₅ were highly dependent on the sample preparation conditions.     

Codes Over the p-adic Integers

We study codes over the p-adic integers and correct errors in the existing literature. We show that MDS codes exist over the p-adics for all lengths, ranks and p. We show that self-dual codes exist over the 2-adics if and only if the length is a multiple of 8 and that self-dual codes exist over the p-adics with p odd if and only if the length is 0 (mod 4) for p ≡ 3 (mod 4) and 0 (mod 2) for p ≡ 1 (mod 4).     

Preparation and characterization of rigid poly(vinyl chloride)/MMT nanocomposites. II. XRD,morphological and mechanical characteristics

A Haake torque rheometer equipped with an internal mixer is used to study the influence of the amount of sodium montmorillonite (Na⁺‐MMT) and organically modified MMT (O‐MMT) on X‐ray diffraction (XRD), morphology, and mechanical characteristics of rigid poly (vinyl chloride) (PVC)/Na⁺‐MMT and PVC/O‐MMT nanocomposites, respectively. Results of XRD and transmission electron microscopy (TEM) indicate that MMT is partially encapsulated and intercalated in the rigid PVC/Na⁺‐MMT nanocomposites. However, results of XRD and TEM show MMT is partially intercalated and exfoliated in the rigid PVC/O‐MMT nanocomposites. Tensile strength, yield strength, and elongation at break of the rigid PVC/MMT nanocomposites were improved simultaneously with adding 1–3 wt % Na⁺‐MMT or O‐MMT with respect to that of pristine PVC. However, the addition of Na⁺‐MMT or O‐MMT should be kept as not more than 3 wt % to optimize the mechanical properties and the processing stability of the rigid PVC/MMT nanocomposites. SEM micrographs of the fractured surfaces of the rigid PVC/Na⁺‐MMT and PVC/O‐MMT nanocomposites both before and after tensile tests were also illustrated and compared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2145–2154, 2006     

Large-time behavior of perturbed diffusion markov processes with applications to the second eigenvalue problem for fokker-planck operators and simulated annealing

We study the large-time behavior and rate of convergence to the invariant measures of the processes dX (t)=b(X) (t)) dt + (X (t)) dB(t). A crucial constant appears naturally in our study. Heuristically, when the time is of the order exp( – )/² , the transition density has a good lower bound and when the process has run for about exp( – )/², it is very close to the invariant measure. LetL =(²/2) – U · be a second-order differential operator on ^d. Under suitable conditions,L ^z has the discrete spectrum

Hyperfunctional Weights for Orthogonal Polynomials

The Chebychev polynomials associated to any given moments μ_{n ∞} ⁰ are formally orthogonal with respect to the formal δ-series $$w(x)= {\sum^\infty_0}(- 1)^{n}\mu_{{n}}\delta^{(n)}(x)/n!.$$ We show that this formal weight can be a true hyperfunctional weight if its Fourier transform is a slowly increasing holomorphic function in some tubular neighborhood of the real line. It provides a unifying treatment of real and complex orthogonality of Chebychev polynomials including all classical examples and characterizes Chebychev polynomials having Bessel type orthogonality.