Novel one-dimensional tubelike and two-dimensional polycatenated metal-organic frameworks

Two novel metal-organic frameworks (MOFs) [Zn(TITMB)(OAc)](OH).8.5H(2)O (1) and [Ag(TITMB)N(3)].H(2)O (2) [TITMB = 1,3,5-tris(imidazol-1-ylmethyl)-2,4,6-trimethylbenzene, OAc = acetate anion] were synthesized and their structures were determined by X-ray crystallography. Complex 1 crystallizes in tetragonal space group P(-)4 with a = 23.2664(7) and c = 11.9890(3) A and Z = 8. 1 has a one-dimensional tubelike structure with large inner pore size of approximately 17 A. Complex 2 crystallizes in monoclinic space group C2 with a = 20.7193(10), b = 11.5677(8), and c = 12.2944(6) A, beta = 125.5770(10) degrees, and Z = 4. 2 consists of two-dimensional honeycomb networks that interpenetrate each other to generate a polycatenated structure. In these two complexes, both zinc(II) and silver(I) atoms are four-coordinated with the same tetrahedral coordination geometry. The topologies of 1 and 2 are predominated by the conformations of TITMB, which are cis, trans, trans in 1 and cis, cis, cis in 2, respectively.     

Use of p-dimethylaminobenzalhyde as a colored reagent for determination of procaine hydrochloride by spectrophotometry

Spectrophotometric determination of procaine hydrochloride is described. The procaine hydrochloride reacts with p-dimethylaminobenzalhyde in glacial acetic acid to form an Schiff base which is a yellow compound, and its maximum absorption wavelength is at 455nm, ₄₅₅=3.46×10⁴. The absorbance for procaine hydrochloride from 0.2 to 15 μg ml⁻¹ obeys Beer's law. The linear regression equation of the calibration graph is C=5.866A−0.02, with a linear regression correlative coefficient is 0.9994 and relative standard deviation (RSD) of 1.7%; the detection limit is 0.1 μg ml⁻¹; recovery is from 92.0 to 110.0%. Effects of reaction medium, temperature, gentamycin, beneylpenicillin, kanamycin, streptomycin, foreign ions, and stand for time on the determination of procaine hydrochloride have been examined. The results obtained by this method agreed with those by the official method (dead-stop titration). This method is rapid and simple, and can be used for the determination of procaine hydrochloride in injection solution of procaine hydrochloride.     

Synthesis of four diastereomeric 3,5-dialkoxy-2,4-dimethylalkanals by a simple extension of the non-aldol aldol process to bis(propionates)

[formula: see text] The synthesis of all four diastereomers of bis(propionates), 3,5-dialkoxy-2,4-dimethylalkanals, by non-aldol aldol chemistry is described. The epoxy alcohols (3, 4) were converted into the mesylates (9, 11) which were cleanly rearranged to the desired 3,5-bis(oxygenated)-2,4-dimethylalkanals (10, 12) in high yield. The epoxy mesylates (13, 16) gave the desired products (14, 17) in good yield on treatment with TMSOTf and a hindered base.     

Equilibrium interaction of solid surfaces across a polymer melt

Forces across polymer melts are poorly understood despite their importance for adhesion and fabricating composite materials. Using an atomic force microscope (AFM), this interaction was measured for poly(dimethyl siloxane) (PDMS). The structure of the polymer at the surface changed during the first approximately 10 h. Afterward, short-range attractive forces were observed with short-chain PDMS (M(w) = 4200 g/mol). Using PDMS with a molecular weight (M(w) = 18 000 g/mol) above the entanglement limit, we measured a monotonically decaying repulsive force, which indicates that a quasi-immobilized layer had formed at the solid surface. Due to the small radius of curvature of the tip, forces could be measured in equilibrium.     

Aggregate manganese Schiff base moieties by terephthalate or acetate: dinuclear manganese and trinuclear mixed metal Mn2/Na complexes

A reaction system consisting of terephthalic acid, NaOH, inorganic Mn(II) or Mn(III) salt, and salicylidene alkylimine resulted in dinuclear manganese complexes (salpn)(2)Mn(2)(mu-phth)(CH(3)OH)(2) (1, salpn = N,N'-1,3-propylene-bis(salicylideneiminato); phth = terephthalate dianion), (salen)(2)Mn(2)(mu-phth)(CH(3)OH)(2) (2, salen = N,N'-ethylene-bis(salicylideneiminato)), (salen)(2)Mn(2)(mu-phth)(CH(3)OH)(H(2)O) (3), and (salen)(2)Mn(2)(mu-phth) (4), while the absence of NaOH in the reaction led to a mononuclear Mn complex (salph)Mn(CH(3)OH)(NO(3)) (5, salph = N,N'-1,2-phenylene-bis(salicylideneiminato)). In addition, a trinuclear mixed metal complex H[Mn(2)Na(salpn)(2)(mu-OAc)(2)(H(2)O)(2)](OAc)(2) (6) was obtained from the reaction system by using maleic acid instead of terephthalic acid. Five-coordinate Mn ions were found in 4 giving rise to an intermolecular interaction and constructing a one-dimensional linear structure. Antiferromagnetic exchange interactions were observed for 1-3, and a total ferromagnetic exchange of 4 was considered to stem from intermolecular magnetic coupling. (1)H NMR signals of phenolate ring and alkylene (or phenylene) backbone of the diamine are similar to those reported in the literature, and the phth protons are at -2.3 to -10.1 ppm. Studies on structure, bond valence sum analysis, and magnetic properties indicate the oxidation states of the Mn ions in 6 to be +3, which are also indicated by ESR spectra in dual mode. Ferromagnetic exchange interaction between the Mn(III) sites was observed with J = 1.74 cm(-1). A quasireversible redox pair at -0.29V/-0.12V has been assigned to the redox of Mn(2)(III)/Mn(III)Mn(II), implying the intactness of the complex backbone in solution.     

A Spectrophotometric Study OE Zirconium Complexes of 4,5-Dihydroxyfluorescein

Zirconium (IV) ions form violet red complex with 4,5-dihydroxyfluorescein in fairly strong mineral acid medium. The reagent has been successfully applied as a metal indicator in the direct EDTA titration of zirconium. The complex formed by 4,5-dihydroxyfluorescein and zirconium ions has been studied spectrophotometrically in 0.1M HCl solution. It is found that when an excess of metal ion is present, a violet red colored complex with metal-ligand ratio of 1:1, (MR) is formed and when an excess of 4,5-dihydroxyfluorescein is present a 1:2 complex (MR₂) may be predominant. The 1:1 complex has maximum absorption at 510 mμ and the 1:2 complex has very low solubility and tends to precipitate out from the solution. Job's method, log-ratio method and gravimetric method were used to establish the composition of complexes. The apparent stability constant of the 1:1 complex is found to be log K_h = 4.46 or K_h = 2.9×10¹ at pH 1.2.     

A Spectrophotometric Study of the Chelate of Iron (III) with Sorbohydroxamic Acid and Its Analytical Application

Iron (III) chelates of sorbohydroxamic acid have been studied spectrophotometrically in aqueous solution. Formation of sorbohydroxamic acid chelates was pH dependent. The “normalized absorbance” concept proposed by Likussar and Boltz has been utilized in the continuous variation plot method of determining the composition of metal chelates and the formation constants. The mole ratio of sorbohydroxamic acid to ferric ion was found to be 1 to 1 stoichiometry at pH lower than 2. The formation constant of this chelate has been evaluated to be 6.0×10¹¹ at a constant ionic strength of 0.1 M at 30°C A spectrophotometric determination of ferric ion with sorbohydroxamic acid was proposed in conjunction with the present work.     

Addition of grignard reagents to aryl acid chlorides: an efficient synthesis of aryl ketones

[chemical reaction: see text]. Direct addition of Grignard reagents to acid chlorides in the presence of bis[2-(N,N-dimethylamino)ethyl] ether proceeds selectively to provide aryl ketones in high yields. A possible tridentate interaction between Grignard reagents and bis[2-(N,N-dimethylamino)ethyl] ether moderates the reactivity of Grignard reagents, preventing the newly formed ketones from nucleophilic addition by Grignard reagents.     

Use of the tubulin bound paclitaxel conformation for structure-based rational drug design

A new computational docking protocol has been developed and used in combination with conformational information inferred from REDOR-NMR experiments on microtubule bound 2-(p-fluorobenzoyl)paclitaxel to delineate a unique tubulin binding structure of paclitaxel. A conformationally constrained macrocyclic taxoid bearing a linker between the C-14 and C-3'N positions has been designed and synthesized to enforce this "REDOR-taxol" conformation. The novel taxoid SB-T-2053 inhibits the growth of MCF-7 and LCC-6 human breast cancer cells (wild-type and drug resistant) on the same order of magnitude as paclitaxel. Moreover, SB-T-2053 induces in vitro tubulin polymerization at least as well as paclitaxel, which directly validates our drug design process. These results open a new avenue for drug design of next generation taxoids and other microtubule-stabilizing agents based on the refined structural information of drug-tubulin complexes, in accordance with typical enzyme-inhibitor medicinal chemistry precepts.