NITROXIDE-MEDIATED FREE RADICAL SYNTHESIS OF MESOGEN-JACKETED LIQUID CRYSTAL POLYMERS*

The first TEMPO-mediated "living" free radical polymerization of liquid crystallinemonomer, 2, 5-bis[(4-methoxyphenyl)oxycarbonyl]styrene(MPCS), was carried out at 130℃ withBPO as an initiator. The molecular weight of the polymer can be varied from rather low values to highvalues while maintaining narrow polydispersity. It was observed that the polymerization of MPCSproceeded much faster than that of styrene. A tentative explanation for this fast polymerization wassuggested.     

Thermal Behaviour and Decomposition Kinetics for Two Palladium(II) Complexes with 1-aminopyrene and its Derivative

The thermal decomposition studies for two palladium(II) complexes Pd(apyr)₂Cl₂ and Pd(pmpa)Cl₂ (apyr=1–aminopyrene and pmpa=N–(2–pyridylmethylene)–1–pyrenylamine) were carried out in pure nitrogen using TG-DTG techniques. The non-isothermal kinetic parameters for the two complexes were evaluated employing the method suggested by Málek, esták, Koga et al. Based on the above results, thermal behaviour of the complexes were carefully discussed, which showed that not only the parameters value, but also the decomposition pattern and mechanism for complex 1 are different from complex 2.This revised version was published online in November 2005 with corrections to the Cover Date.     

Application of water as a solvent in microwave-assisted extraction for analysis of PCBs and CBzs in fly ash

Polychlorinated biphenyls (PCBs) and chlorobenzenes (CBzs) are two classes of dioxin precursors formed in municipal solid waste incinerators (MSWIs); they produce negative health effects similar to those of dioxins. Reducing the analytical time required for determining the concentrations of these compounds in MSWIs is important for quickly evaluating their importance and assessing associated health risks. In the present study, water is used as a safe and environmentally friendly solvent in microwave-assisted extraction (MAE) for PCB and CBz analyses. MAE is compared with traditional Soxhlet extraction (SE) to determine the extraction efficiencies. The evaluation of extraction efficiencies shows that MAE has a high extraction efficiency compared with that of SE when water content is lower than 60%. Furthermore, the extraction time and organic solvent consumption are reduced with MAE compared with SE.     

新型纤维素衍生物手性固定相的制备及其对几种对映异构体的高效液相色谱分离

合成了一种经环十二烷修饰的纤维素酯，将其涂敷于小粒径的氨丙基化硅胶（APS）上，制备出高效液相色谱手性固定相，以正己烷、异丙醇为流动相拆分了2-对氯苯基丙腈、1-对氟苯基乙醇、1-对叔丁基苯氧基-2-丙醇、2-对氯苯基辛腈及三唑醇等5种外消旋对映体，并考察了流动相中异丙醇含量对分离效果的影响。     

Affinity Chromatography of Insulin with a Heptapeptide Ligand Selected from Phage Display Library

A heptapeptide phage display library was screened with insulin to find its ligands for affinity chromatography. The peptide was synthesized and coupled to EAH Sepharose 4B (5.4 mol mL^–1 bed). Then, insulin chromatography was carried out with mobile phases of different pH values and by the addition of urea and ethylene glycol. It was found that electrostatic interactions were predominant for the affinity binding, and hydrogen bonding might also contribute somewhat to the affinity. Finally, frontal analysis was performed and the dynamic binding capacity of the affinity column for insulin at 50% breakthrough was estimated at 60.6 mg mL^–1 bed, which was about two times higher than the theoretical binding capacity of the monomeric insulin. The result suggests that insulin was bound in dimer state in a stoichiometric relationship with the coupled peptide, indicating the high binding efficiency of the peptide ligand for insulin.     

Synthesis and structure of Mn(II) and Zn(II) complexes containing 1,10-phenanthroline unit

The Mn(II) and Zn(II) complexes of N,N′-diisopropyl-1,10-phenanthroline-2,9-dimethanamine have been synthesised, and the structure of the two complexes have been studied by X-ray crystallography.     

集成微管路离子选择电极功能块研究

本文对微型管状离子选择电极在流动条件下的电化学特征进行了研究,并设计了新的集成微管路离子选择以电极功能块。用此微型装置测定了土壤、血清、水和药物中的K~+、Na~+、pH、Cl~-、F~-、阿托品、东茛菪碱,并和各种标准方法作了比较,获得满意分析结果。     

反向流动注射化学发光法测定痕量铁

基于邻菲别名林对高碘酸钾－碱性鲁米诺－铁体系发光强度的增敏作用建立了水体中总铁的反向流动性化学发光检测方法。该法线性范围在１×１０＾－４－１０ｍｇ／Ｌ，检测限为３×１０＾－６ｍｇ／Ｌ，对于５×１０＾－３ｍｇ／Ｌ Ｆｅ测定９次的相对标准偏差为０．９％。此方法已用在水处理中总铁的监测。     

Thermally produced biodegradable scaffolds for cartilage tissue engineering

A novel process was developed to fabricate biodegradable polymer scaffolds for tissue engineering applications, without using organic solvents. Solvent residues in scaffolds fabricated by processes involving organic solvents may damage cells transplanted onto the scaffolds or tissue near the transplantation site. Poly(L-lactic acid) (PLLA) powder and NaCl particles in a mold were compressed and subsequently heated at 180 degrees C (near the PLLA melting temperature) for 3 min. The heat treatment caused the polymer particles to fuse and form a continuous matrix containing entrapped NaCl particles. After dissolving the NaCl salts, which served as a porogen, porous biodegradable PLLA scaffolds were formed. The scaffold porosity and pore size were controlled by adjusting the NaCl/PLLA weight ratio and the NaCl particle size. The characteristics of the scaffolds were compared to those of scaffolds fabricated using a conventional solvent casting/particulate leaching (SC/PL) process, in terms of pore structure, pore-size distribution, and mechanical properties. A scanning electron microscopic examination showed highly interconnected and open pore structures in the scaffolds fabricated using the thermal process, whereas the SC/PL process yielded scaffolds with less interconnected and closed pore structures. Mercury intrusion porosimetry revealed that the thermally produced scaffolds had a much more uniform distribution of pore sizes than the SC/PL process. The utility of the thermally produced scaffolds was demonstrated by engineering cartilaginous tissues in vivo. In summary, the thermal process developed in this study yields tissue-engineering scaffolds with more favorable characteristics, with respect to, freedom from organic solvents, pore structure, and size distribution than the SC/PL process. Moreover, the thermal process could also be used to fabricate scaffolds from polymers that are insoluble in organic solvents, such as poly(glycolic acid). Cartilage tissue regenerated from thermally produced PLLA scaffold.     

中药配方颗粒红外光谱法的快速鉴别

采用红外光谱法对中药配方颗粒及其辅料进行了鉴别研究。结果表明：不同生产厂商的配方颗粒中所添加的辅料类型及用量有较大差别；不同种的配方颗粒在辅料含量较低的情况下有较明显的指纹性，而辅料含量较高时，采用差谱技术可以提高谱图的指纹性，达到中药配方颗粒--鉴别的目的。该法简便、快速、可靠，是中药配方颗粒宏观质控的一个强有力的手段。