稀土钬及铒钇丙氨酸配合物的量热与热分析研究

合成了两种固态稀土丙氨酸配合物[Ho2(Ala)4(H2O)8]Cl6和[ErY(Ala)4(H2O)8](ClO4)6 (Ala为丙氨酸),用量热和热分析方法研究了这两种配合物的热力学性质.用全自动高精密绝热量热计测定了在78～377 K温区内的低温热容.对于[Ho2(Ala)4(H2O)8]Cl6,在214～255 K温区内发现一固-固相变,其相变温度为235.09 K.对于[ErY(Ala)4(H2O)8](ClO4)6,在99～121 K温区内也发现一固-固相变,其相变温度为115.78 K. [Ho2(Ala)4(H2O)8]Cl6固-固相变焓为3.02 kJ• mol－1,相变熵为12.83 J•K－1•mol－1； [ErY(Ala)4(H2O)8](ClO4)6 固-固相变焓为1.96 kJ•mol－1,相变熵为16.90 J•K－1•mol－1.同时,用TG技术在40～800 ℃温区研究了两配合物的热稳定性.由TG/DTG曲线分析可知, [Ho2(Ala)4(H2O)8]Cl6从80 ℃到479 ℃热分解分两步完成, [ErY(Ala)4(H2O)8](ClO4)6从120 ℃到430 ℃热分解分三步完成.     

TEOS-MTES基SiO2溶胶微结构的SAXS研究

正硅酸乙酯(TEOS)为前驱体,在碱性条件下制备含有无定形SiO2颗粒的溶胶,以甲基三乙氧基硅烷(MTES)在酸性条件下获得聚甲基硅氧链,二者混合后应用同步辐射X射线进行混合溶胶的SAXS散射强度测定,计算了溶胶的平均回转半径、平均粒径、两相界面层厚度、散射体体积分数、两相间比表面积等参数,辅以光子相关光谱法(PCS)和透射电子显微镜(TEM)观测溶胶粒度,证实SiO2颗粒被MTES混合物连接成族团.实验发现所测混合溶胶样品均表现出对Porod定理的负偏离,说明溶胶中颗粒与溶剂之间存在很明显的两相间界面层.     

TiO2纳米膜表面结构形态特征

采用反胶束法制备TiO2纳米溶胶,用浸渍提拉法在不同的条件下制备了三种TiO2多孔纳米薄膜,并利用AFM、SEM、XRD等方法对膜表面结构物理化学特性进行表征.结果表明三种膜基本上由粒径约为59 nm的纳米粒子以不同的方式堆积而成,溶胶刚生成时浸提一次,干燥、焙烧得到膜上纳米粒子分布均匀,所生成的二次粒子粒径最小,二次粒子形成的二次表面粗糙度最小,浸提10次得到膜上纳米粒子间存在较丰富缝隙结构,二次粒子粒径及其形成的表面粗糙度较大,而溶胶制备好陈化6 h后浸提得到的膜上二次粒子粒径最大,表面粗糙度最高.由分形理论估算得到三种膜的分形维数分别是2.22、2.20和2.27. XRD测试表明,膜上TiO2为锐钛矿晶相.这些结果表明,采用不同制备步骤得到的膜,其表面结构形态存在较大的差异.     

用双表面活性剂为共模板合成中孔分子筛MCM-48

利用水热法以非离子表面活性剂聚乙二醇辛基苯基醚和阳离子表面活性剂十六烷基三甲基溴化铵为共模板合成了中孔分子筛MCM-48.实验中发现利用较强的范德华力和氢键,聚乙二醇辛基苯基醚可在很大程度上降低合成MCM-48所需阳离子表面活性剂的用量,且利于制备有序性好、骨架聚合度高、稳定性好的MCM-48.通过调节聚乙二醇辛基苯基醚与十六烷基三甲基溴化铵的比例,可得到不同物相结构的分子筛.     

Three New Pregnane Alkaloids from Veratrum taliense

Three new alkaloids, 3‐O‐acetylveralkamine ( 1 ), veralkamine 3‐(β‐D ‐glucopyranoside) ( 2 ), and 6,7‐epoxyverdine ( 3 ), together with five known alkaloids, veramitaline, veralkamine ( 4 ), angeloylzygadenine, veratroylzygadenine, and veramiline 3‐(β‐D ‐glucopyranoside), were isolated from the whole plants of Veratrum taliense. Their structures were elucidated on the basis of spectroscopic analysis, and the NMR data of veralkamine ( 4 ) are given for the first time. In addition, the cytotoxic activities of all isolated compounds, except for veramitaline, were tested.     

Electrochemical Behaviors of Adenosine‐5′‐triphosphate on Molecular Wire Modified Carbon Paste Electrode and Its Sensitive Detection

A new electrochemical method was proposed for the determination of adenosine‐5′‐triphosphate (ATP) based on the electrooxidation at a molecular wire (MW) modified carbon paste electrode (CPE), which was fabricated with diphenylacetylene (DPA) as the binder. A single well‐defined irreversible oxidation peak of ATP appeared on MW‐CPE with adsorption‐controlled process and enhanced electrochemical response in a pH 3.0 Britton‐Robinson buffer solution, which was due to the presence of high conductive DPA in the electrode. The electrochemical parameters of ATP were calculated with the electron transfer coefficient (α) as 0.54, the electron transfer number (n) as 1.9, the apparent heterogeneous electron transfer rate constant (k_s) as 2.67 × 10^?5 s^?1 and the surface coverage (Γ_T) as 4.15 × 10^?10 mol cm^?2. Under the selected conditions the oxidation peak current was proportional to ATP concentration in the range from 1.0 × 10^?7 mol L^?1 to 2.0 × 10^?3 mol L^?1 with the detection limit as 1.28 × 10^?8 mol L^?1 (3σ) by sensitive differential pulse voltammetry. The proposed method showed good selectivity without the interferences of coexisting substances and was successful applied to the ATP injection samples detection.     

Syntheses,Crystal Structures,and Magnetic Properties of Three 1D Chain Metal–Nitroxide Complexes Bridged by ­Flexible Dicarboxylate Anions

Three new one‐dimensional (1D) chain metal–nitroxide complexes {[Cu(NIT4Py)₂(suc)(H₂O)] · 3H₂O}_n ( 1 ), {[Cd(NIT4Py)₂(suc)(H₂O)] · [Cd(NIT4Py)₂(suc)(H₂O)₂] · 3H₂O}_n ( 2 ), and {[Zn(NIT4Py)(glu)(H₂O)] · H₂O}_n ( 3 ) [NIT4Py = 2‐(4′‐pyridyl)‐4, 4, 5, 5‐tetramethylimidazoline‐1‐oxyl‐3‐oxide, suc = succinate anion and glu = glutarate anion] were synthesized and structurally characterized. Single‐crystal X‐ray analyses indicate that the three complexes crystallize in neutral 1D chains in which the metal‐nitroxide units are linked by flexible dicarboxylate anions. The succinate anions only adopt trans configuration in complexes 1 and 2 , whereas the glutarate anion has gauche/anti conformation in complex 3 . Magnetic measurements show that complex 1 exhibits weak antiferromagnetic interactions between the copper ions and the nitroxides.     

Two Supramolecular Nickel(II) Complexes: Syntheses,Crystal Structures and Solvent Effects

Two nickel(II) complexes, namely {[NiL(MeOH)(μ‐OAc)]₂Ni} · 2CH₂Cl₂ · 2MeOH ( 1 ) and {[NiL(EtOH)(μ‐OAc)]₂Ni} · 2EtOH ( 2 ) {H₂L = 5, 5′‐dimethoxy‐2, 2′‐[(ethylene)dioxybis(nitrilomethylidyne)]diphenol}, were synthesized and structurally characterized. Two trinuclear Ni^II complexes are both hexacoordinate around the central Ni^II atoms, showing octahedral coordination arrangements, and each complex comprises three divalent Ni^II atoms, two deprotonated L^2– ligands, in which four μ‐phenoxo oxygen atoms forming two [NiL(X)] (X = MeOH or EtOH) units, and coordinated and non‐coordinated solvent molecules. Complex 1 exhibits a 2D supramolecular network through intermolecular O–H ··· O, C–H ··· O and C–H ··· π interactions, whereas complex 2 forms an infinite 1D chain by intermolecular C–H ··· O hydrogen bonding interactions.