Preliminary communicationCatalytic olefin hydrogenation with nonacarbonyltris(triphenylphosphine)triruthenium and its derivatives. Crystal structure of [Ru2(CO)5(PPh3)(μ-PPh2)(μ-OCPh)]

The complexes [Ru₃(CO)₇(PPh₂)₂(C₆H₄)] and [Ru₂(CO)₅(PPh₃)(μ-PPh₂)(μ-OCPh)] were obtained by pyrolysis of [Ru₃(CO)₉(PPh₃)₃] and tested as catalysts for the hydrogenation of cyclohexene and 2-cyclohexen-1-one. The structure of [Ru₂(CO)₅(PPh₃)(μ-PPh₂)(μ-OCPh)] was established by a single crystal X-ray diffraction study.     

Bridging nitrate groups in [Mn(4)O(3)(NO(3))(O(2)CMe)(3)(R(2)dbm)(3)] (R = H, Et) and [Mn(4)O(2)(NO(3))(O(2)CEt)(6)(bpy)(2)](ClO(4)): acidolysis routes to tetranuclear manganese carboxylate complexes

New synthesis procedures are described to tetranuclear manganese carboxylate complexes containing the [Mn(4)O(2)](8+) or [Mn(4)O(3)X](6+) (X(-) = MeCO(2)(-), F(-), Cl(-), Br(-), NO(3)(-)) core. These involve acidolysis reactions of [Mn(4)O(3)(O(2)CMe)(4)(dbm)(3)] (1; dbm is the anion of dibenzoylmethane) or [Mn(4)O(2)(O(2)CEt)(6)(dbm)(2)] (8) with HX (X(-) = F(-), Cl(-), Br(-), NO(3)(-)); high-yield routes to 1 and 8 are also described. The X(-) = NO(3)(-) complexes [Mn(4)O(3)(NO(3))(O(2)CR)(3)(R'(2)dbm)(3)] (R = Me, R' = H (6); R = Me, R' = Et (7); R = Et, R' = H (12)) represent the first synthesis of the [Mn(4)O(3)(NO(3))](6+) core, which contains an unusual eta(1):mu(3)-NO(3)(-) group. Treatment of known [Mn(4)O(2)(O(2)CEt)(7)(bpy)(2)](ClO(4)) with HNO(3) gives [Mn(4)O(2)(NO(3))(O(2)CEt)(6)(bpy)(2)](ClO(4)) (15) containing a eta(1):eta(1):mu-NO(3)(-) group bridging the two body Mn(III) ions of the [Mn(4)O(2)](8+) butterfly core. Complex 7 x 4CH(2)Cl(2) crystallizes in space group P2(1)2(1)2(1) with (at -168 degrees C) a = 21.110(3) A, b = 22.183(3) A, c = 15.958(2) A, Z = 4, and V = 7472.4(3) A(3). Complex 15 x (3)/(2)CH(2)Cl(2) crystallizes in space group P2(1)/c with (at -165 degrees C) a = 26.025(4) A, b = 13.488(2) A, c = 32.102(6) A, beta = 97.27(1) degrees, Z = 8, and V = 11178(5) A(3). Complex 7 contains a [Mn(4)(mu(3)-O)(3)(mu(3)-NO(3))](6+) core (3Mn(III), Mn(IV)) as seen for previous [Mn(4)O(3)X](6+) complexes. Complex 15 contains a butterfly [Mn(4)(mu(3)-O)(2)](8+) core. (1)H NMR spectra have been recorded for all complexes reported in this work and the various resonances assigned. All complexes retain their structural integrity on dissolution in chloroform and dichloromethane. Magnetic susceptibility (chi(M)) data were collected on 12 in the 5-300 K range in a 10.0 kG (1 T) field. Fitting of the data to the theoretical chi(M) vs T expression appropriate for a [Mn(4)O(3)X](6+) complex of C(3)(v)() symmetry gave J(34) = -23.9 cm(-)(1), J(33) = 4.9 cm(-)(1), and g = 1.98, where J(34) and J(33) refer to the Mn(III)Mn(IV) and Mn(III)Mn(III) pairwise exchange interactions, respectively. The ground state of the molecule is S = 9/2, as found previously for other [Mn(4)O(3)X](6+) complexes. This was confirmed by magnetization data collected at various fields and temperatures. Fitting of the data gave S = 9/2, D = -0.45 cm(-1), and g = 1.96, where D is the axial zero-field splitting parameter.     

Dielectrophoretic assembly of metallodielectric Janus particles in AC electric fields

"Janus" particles with two hemispheres of different polarizability or charge demonstrate a multitude of interesting effects in external electric fields. We reported earlier how particles with one metallic hemisphere and one dielectric hemisphere self-propel in low-frequency alternating current (AC) electric fields. Here, we demonstrate the assembly of such Janus particles driven by AC electric fields at frequencies above 10 kHz. We investigated the relation between field-induced dielectrophoretic force, field distribution, and structure of the assemblies. The phase space for electric field intensity and frequency was explored for particle concentrations large enough to form a monolayer on a glass surface between two gold electrodes. A rich variety of metallodielectric particle structures and dynamics were uncovered, which are very different from those obtained from directed assembly of plain dielectric or plain conductive particles under the action of fields of similar frequency and intensity. The metallodielectric particles assemble into new types of chain structures, where the metallized halves of neighboring particles align into lanes along the direction of the electric field, while the dielectric halves face in alternating direction. The staggered chains may assemble in various orientations to form different types of two-dimensional metallodielectric crystals. The experimental results on the formation of staggered chains are interpreted by means of numerical simulations of the electric energy of the system. The assembly of Janus metallodielectric particles may find applications in liquid-borne microcircuits and materials with directional electric and heat transfer.     

Comparison of two accelerated Nafion™ degradation experiments

This work describes a systematic investigation of the degradation of Nafion™ 112 membranes using a Fenton's accelerated aging experiment. Two variations of the experiment were compared: a solution method where iron ions and peroxide exist together in solution prior to the addition of Nafion™, and an exchange method where Nafion™ in the Fe²⁺ form is exposed to hydrogen peroxide. Accelerated aging experiments were conducted over 3-5 days. Weight loss, fluoride ion release, ion exchange capacity, intrinsic viscosity, morphological characteristics, and dimensional changes were measured. FTIR spectra, mechanical properties and membrane barrier properties were also investigated.     

Controlling a single protein in a nanopore through electrostatic traps

Protein-protein pore interaction is a fundamental and ubiquitous process in biology and medical biotechnology. Here, we employed high-resolution time-resolved single-channel electrical recording along with protein engineering to examine a protein-protein pore interaction at single-molecule resolution. The pore was formed by Staphylococcus aureus alpha-hemolysin (alphaHL) protein and contained electrostatic traps formed by rings of seven aspartic acid residues placed at two different positions within the pore lumen. The protein analytes were positively charged presequences (pb2) of varying length fused to the small ribonuclease barnase (Ba). The presence of the electrostatic traps greatly enhanced the interaction of the pb2-Ba protein with the alphaHL protein pore. This study demonstrates the high sensitivity of the nanopore technique to an array of factors that govern the protein-protein pore interaction, including the length of the pb2 presequence, the position of the electrostatic traps within the pore lumen, the ionic strength of the aqueous phase, and the transmembrane potential. Alterations in the functional properties of the pb2-Ba protein and the alphaHL protein pore and systematic changes of the experimental parameters revealed the balance between forces driving the pb2-Ba protein into the pore and forces driving it out.     

Synthesis and photovoltaic properties of 2,6‐bis(2‐thienyl) benzobisazole and 4,8‐bis(thienyl)‐benzo[1,2‐B:4,5‐B′]dithiophene copolymers

In an effort to design efficient low‐cost polymers for use in organic photovoltaic cells the easily prepared donor–acceptor–donor triad of a either cis‐benzobisoxazole, trans‐benzobisoxazole or trans‐benzobisthiazole flanked by two thiophene rings was combined with the electron‐rich 4,8‐bis(5‐(2‐ethylhexyl)‐thien‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene. The electrochemical, optical, morphological, charge transport, and photovoltaic properties of the resulting terpolymers were investigated. Although the polymers differed in the arrangement and/or nature of the chalcogens, they all had similar highest occupied molecular orbital energy levels (?5.2 to ?5.3 eV) and optical band gaps (2.1–2.2 eV). However, the lowest unoccupied molecular orbital energy levels ranged from ?3.1 to ?3.5 eV. When the polymers were used as electron donors in bulk heterojunction photovoltaic devices with PC₇₁BM ([6,6]‐phenyl C₇₁‐butyric acid methyl ester) as the acceptor, the trans‐benzobisoxazole polymer had the best performance with a power conversion efficiency of 2.8%. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 316–324     

Preparation,spectroscopic, thermal and powder X‐ray diffraction characterization,and antimicrobial activities of mixed bis(O,O′‐diisopropyldithiophosphato‐S,S′)antimony(III) derivatives with some oxygen and sulfur donor ligands

Newly synthesized mixed bis(O,O′‐diisopropyldithiophosphato‐S,S′)antimony(III) derivatives have been characterized using physicochemical, spectral, thermal and powder X‐ray diffraction studies, and their antimicrobial activities were investigated. These derivatives have nanometric crystallite size (11.39–14.67 nm) with unit cell volume (4968.47 and 5079.79 ų) and lower symmetry (monoclinic) crystal system. After thermal decomposition in inert atmosphere, these derivatives give antimony sulfide as a final decomposition product which has many potential applications, and they exhibit enhanced antimicrobial activities (greater zone of inhibition) as compared to the free ligands and standard drugs (chloroamphenicol and terbinafine were used as standard antibacterial and antifungal drugs, respectively) due to the nanometric size of the complexes.     

Wolves in Sheep's Clothing: μ‐Oxo‐Diiron Corroles Revisited

For well over 20 years, μ‐oxo‐diiron corroles, first reported by Vogel and co‐workers in the form of μ‐oxo‐bis[(octaethylcorrolato)iron] (Mössbauer δ 0.02 mm s^?1, ΔE_Q 2.35 mm s^?1), have been thought of as comprising a pair antiferromagnetically coupled low‐spin Fe^IV centers. The remarkable stability of these complexes, which can be handled at room temperature and crystallographically analyzed, present a sharp contrast to the fleeting nature of enzymatic, iron(IV)‐oxo intermediates. An array of experimental and theoretical methods have now shown that the iron centers in these complexes are not Fe^IV but intermediate‐spin Fe^III coupled to a corrole^.2?. The intramolecular spin couplings in {Fe[TPC]}₂(μ‐O) were analyzed via DFT(B3LYP) calculations in terms of the Heisenberg–Dirac–van Vleck spin Hamiltonian H=J_Fe–corrole(S_Fe?S_corrole)+J_Fe–Fe′(S_Fe?S_Fe′)+J_{Fe′–corrole}(S_Fe′?S_corrole′), which yielded J_Fe–corrole=J_{Fe′–corrole′}=0.355 eV (2860 cm^?1) and J_Fe–Fe′=0.068 eV (548 cm^?1). The unexpected stability of μ‐oxo‐diiron corroles thus appears to be attributable to charge delocalization via ligand noninnocence.     

In vivo metabolic investigation of cetilistat in normal versus pseudo-germ-free rats using UPLC-QTOFMS/MS and in silico toxicological evaluation of its metabolites

Cetilistat (CET) is a pancreatic lipase inhibitor approved for management of obesity after the serious adverse effects exhibited by its analogue orlistat. Exhaustive literature review reveals lack of comprehensive reports on its biotransformation. With a view to study the same, the present study reports the identification and characterization of metabolites of CET in rats using UPLC–MS/MS. As the small intestine is the site of action for CET, it is important that the role of microbial flora in the metabolism of CET be explored. To achieve this, the metabolic profile of CET was compared between normal and pseudo-germ-free rats. The study involved the administration of a drug suspension to male Sprague–Dawley pseudo-germ-free and normal untreated rats followed by collection of urine, feces, and blood at specific intervals. Sample preparation was performed using liquid–liquid extraction and concentration of samples followed by analysis using LC–MS/MS. Finally, an in silico study was performed on the drug and metabolites to predict their toxicological properties using ADMET Predictor^TM software. Four metabolites of CET were observed in in vivo matrices. As expected, significant changes were observed both qualitatively and quantitatively, implying that formation of metabolites was both CYP enzymes and gut microflora mediated.     

Applications of Carbon Dots (CDs) in Latent Fingerprints Imaging

Carbon dots (CDs), a new member of the carbon-based material family, possess unique properties, such as high fluorescence, non-toxicity, eco-friendliness, stability and cost-effectiveness. These properties helped CDs to receive tremendous attention in various fields, namely, biological, opto-electronic, bio-imaging and energy-related applications. Although CDs are widely explored in bio-imaging and bio-sensing applications, their effectiveness in forensic science and technology is comparatively new. In this review, applications of CDs pertaining to latent FPs recovery since 2015 to 2020 is summarized comprehensively.