Radiation dose-dependent risk on individuals due to ingestion of uranium and radon concentration in drinking water samples of four districts of Haryana,India

Uranium gets into drinking water when the minerals containing uranium are dissolved in groundwater. Uranium and radon concentrations have been measured in drinking water samples from different water sources such as hand pumps, tube wells and bore wells at different depths from various locations of four districts (Jind, Rohtak, Panipat and Sonipat) of Haryana, India, using the LED flourimetry technique and RAD7, electronic silicon solid state detector. The uranium (²³⁸U) and radon (²²²Rn) concentrations in water samples have been found to vary from 1.07 to 40.25?µg?L^?1 with an average of 17.91?µg?L^?1 and 16.06?±?0.97 to 57.35?±?1.28?Bq?L^?1 with an average of 32.98?±?2.45?Bq?L^?1, respectively. The observed value of radon concentration in 43 samples exceeded the recommended limits of 11?Bq?L^?1 (USEPA) and all the values are within the European Commission recommended limit of 100?Bq?L^?1. The average value of uranium concentration is observed to be within the safe limit recommended by World Health Organization (WHO) and Atomic Energy Regulatory Board. The annual effective dose has also been measured in all the water samples and is found to be below the prescribed dose limit of 100?µSv?y^?1 recommended by WHO. Risk assessment of uranium in water is also calculated using life time cancer risk, life time average daily dose and hazard quotient. The high uranium concentration observed in certain areas is due to interaction of ground water with the soil formation of this region and the local subsurface geology of the region.     

Ageing and rejuvenation in glassy amorphous polymers

Physical ageing of amorphous polymers well below their glass transition temperature leads to changes in almost all physical properties. Of particular interest is the increase in yield stress and post-yield strain softening that accompanies ageing of these materials. Moreover, at larger strain polymers seem to rejuvenate, i.e. aged and non-aged samples have identical stress-strain responses. Also, plastically deforming an aged sample seems to rejuvenate the polymer. In this work we use molecular dynamic simulations with a detailed force field suitable for macromolecular ensembles to simulate and understand the effects of ageing on the mechanical response of these materials. We show that within the timescales of these simulations it is possible to simulate both ageing and rejuvenation. The short range potentials play an important role in ageing and rejuvenation. A typical yield drop exhibited by glassy polymers is a manifestation of a sudden relaxation in the short range structure of an aged polymer. Moreover, the aged polymers are known to be brittle. We show that this is intimately related to its typical stress-strain response which allows it to carry arbitrarily large mean stresses ahead of a notch.     

On the importance of thermo-elastic cooling in the fracture of glassy polymers at high rates

In a previous thermo-mechanical analysis [Estevez, R., Basu, S., van der Giessen, E., 2005. Analysis of temperature effects near mode I cracks in glassy polymers. Int. J. Fract. 132, 249–273] in which shear yielding of the bulk and failure by crazing were accounted for, we examined which of these two viscoplastic processes contributed to heat in mode I fracture. The present study completes this work by investigating the conditions for thermo-elastic cooling prior to crack propagation as reported experimentally by Rittel [Rittel, D., 1998. Experimental investigation of transient thermo-elastic effects in dynamic fracture. Int. J. Solids Struct. 35, 2959–2973] and Bougaut and Rittel [Bougaut, O., Rittel, D., 2001. On crack tip cooling during dynamic crack propagation. Int. J. Solids Struct. 38, 2517–2532] on high strain rate loading of PMMA. To this end, coupled thermo-mechanical finite element simulations are carried out by accounting for the thermo-elastic source, in addition to the heat sources related to shear yielding and crazing. The bulk as well as cohesive zone parameters for crazing realistically describe PMMA as they are obtained from detailed calibration experiments. Our results show that if significant thermo-elastic cooling has to be observed in the vicinity of the crack tip of a polymeric material, suppression of shear yielding as well as suppression of crazing is necessary. It seems that at these high strain rates a brittle fracture mechanism activated at very high stresses takes over from crazing, or at least that craze initiation occurs for stress levels very different to those for quasi-static conditions.     

Silica Nanospheres Coated Silver Islands as an Effective Opto-Plasmonic SERS Active Platform for Rapid and Sensitive Detection of Prostate Cancer Biomarkers

The in vitro diagnostics of cancer are not represented well yet, but the need for early-stage detection is undeniable. In recent decades, surface-enhanced Raman spectroscopy (SERS) has emerged as an efficient, adaptable, and unique technique for the detection of cancer molecules in their early stages. Herein, we demonstrate an opto-plasmonic hybrid structure for sensitive detection of the prostate cancer biomarker sarcosine using silica nanospheres coated silver nano-islands as a facile and efficient SERS active substrate. The SERS active platform has been developed via thin (5–15 nm) deposition of silver islands using a simple and cost-effective Radio Frequency (RF) sputtering technique followed by the synthesis and decoration of silica nanospheres (~500 nm) synthesized via Stober’s method. It is anticipated that the coupling of Whispering Gallery Modes and photonic nano-jets in SiO₂ nanospheres induce Localized Surface Plasmon Resonance (LSPR) in Ag nano-islands, which is responsible for the SERS enhancement. The as-fabricated SERS active platform shows a linear response in the physiological range (10 nM to 100 μM) and an extremely low limit of detection (LOD) of 1.76 nM with a correlation coefficient of 0.98 and enhancement factor ~2 × 10⁷. The findings suggest that our fabricated SERS platform could be potentially used for the rapid detection of bio-chemical traces with high sensitivity.     

Activation of IGF-1/GLP-1 Signalling via 4-Hydroxyisoleucine Prevents Motor Neuron Impairments in Experimental ALS-Rats Exposed to Methylmercury-Induced Neurotoxicity

Amyotrophic lateral sclerosis (ALS) is a severe adult motor neuron disease that causes progressive neuromuscular atrophy, muscle wasting, weakness, and depressive-like symptoms. Our previous research suggests that mercury levels are directly associated with ALS progression. MeHg+-induced ALS is characterised by oligodendrocyte destruction, myelin basic protein (MBP) depletion, and white matter degeneration, leading to demyelination and motor neuron death. The selection of MeHg+ as a potential neurotoxicant is based on our evidence that it has been connected to the development of ALS-like characteristics. It causes glutamate-mediated excitotoxicity, calcium-dependent neurotoxicity, and an ALS-like phenotype. Dysregulation of IGF-1/GLP-1 signalling has been associated with ALS progression. The bioactive amino acid 4-hydroxyisoleucine (HI) from Trigonella foenum graecum acts as an insulin mimic in rodents and increases insulin sensitivity. This study examined the neuroprotective effects of 4-HI on MeHg+-treated adult Wistar rats with ALS-like symptoms, emphasising brain IGF1/GLP-1 activation. Furthermore, we investigated the effect of 4-HI on MBP levels in rat brain homogenate, cerebrospinal fluid (CSF), blood plasma, and cell death indicators such as caspase-3, Bax, and Bcl-2. Rats were assessed for muscular strength, locomotor deficits, depressed behaviour, and spatial learning in the Morris water maze (MWM) to measure neurobehavioral abnormalities. Doses of 4-HI were given orally for 42 days in the MeHg+ rat model at 50 mg/kg or 100 mg/kg to ameliorate ALS-like neurological dysfunctions. Additionally, neurotransmitters and oxidative stress markers were examined in rat brain homogenates. Our findings suggest that 4-HI has neuroprotective benefits in reducing MeHg+-induced behavioural, neurochemical, and histopathological abnormalities in ALS-like rats exposed to methylmercury.     

Facile one-pot synthesis of aliphatic bridged diaryloxy compounds,cyclic and crown ethers under mild conditions

We report here the facile, room temperature, catalyst free, one pot synthesis of aliphatic bridged diaryloxy compounds, cyclic and crown ethers. Anhydrous potassium carbonate (K₂CO₃) as a mild base along with dimethyl sulfoxide generates the phenoxide ion which facilitates the nucleophilic substitution of bromoalkanes to yield the corresponding crown ethers.     

Sulfur bridging interactions of cis-planar NiII-S2N2 coordination units with nickel(II), copper(I,II), zinc(II), and mercury(II): a library of bridging modes, including NiII(micro2-SR)2MI,II rhombs

Sulfur bridging interactions between three cis-planar NiII-S2N2 complexes and NiII, CuI,II, ZnII, and HgII reactants were investigated by synthesis and X-ray crystal structures of some 24 complexes. This work was stimulated by recent crystallographic structures of the A-cluster of carbon monoxide dehydrogenase/acetylcoenzyme A synthase. This bridged biological assembly has the minimal formulation [Fe4S4]-(micro2-SCys)-[M((micro2-SCys)2Gly)Ni] with M = NiII, CuI, and ZnII at sites distal and proximal, respectively, to the iron-sulfur cluster. Bridges supported by representations of the distal nickel site were sought by reactions of the complexes [NiII(LH-S2N2)]2- and [NiII(LR-S2N2)], with 5-5-5 chelate ring patterns. Reaction products implicate the bridges Ni-(micro2-S)1,2-M in a variety of molecular structures, some with previously unknown connectivities of bridge atoms. The most frequently encountered bridge units are the nonplanar rhombs Ni(2-S)2M involving both sulfur atoms of a given complex. Those with M = NiII are biologically relevant inasmuch as the catalytic metal at the proximal site is nickel. The complex [Ni(L-655)]2-, containing the 6-5-5 ring pattern and coordination sphere of the distal nickel site, was prepared and structurally characterized. It was shown to sustain Ni2(micro2-S)2 rhombic interactions in the form of trinuclear [[Ni(L-655)]2Ni]2- and [[Ni(L-655)]Ni(R2PCH2CH2PR2)] (R = Et, Ph) in which the second NiII simulates the proximal site. Bridging interactions of NiII-S2N2 complexes are summarized, and geometrical features of Ni2(2-S)2 rhombs in these complexes, as dependent on ring patterns, are considered (LH-S2N2 = N,N'-ethylenebis(2-mercaptoisobutyramide)(4-); LR-S2N2 = trans-rac-N,N'-bis(2-mercapto-2-methylprop-1-yl)-1,2-cyclohexanediamine(2-); L-655 = N-(2-mercaptopropyl)-N'-(2'-mercaptoethyl)glycinamide(4-)).     

A magnetostructural study of linear NiII MnIII NiII, NiII CrIII NiII and triangular Ni(II)3 species containing (pyridine-2-aldoximato)nickel(II) unit as a building block

Three trinuclear complexes, NiII MnIII NiII, NiII CrIII NiII and Ni(II)3 based on (pyridine-2-aldoximato)nickel(II) units are described. Two of them, and , contain metal-centers in linear arrangement, as is revealed by X-ray diffraction. Complex is a homonuclear complex in which the three nickel(II) centers are disposed in a triangular fashion. The compounds were characterized by various physical methods including cyclic voltammetric and variable-temperature (2-290 K) susceptibility measurements. Complexes and display antiferromagnetic exchange coupling of the neighbouring metal centers, while weak ferromagnetic spin exchange between the adjacent Ni II and Cr III ions in is observed. The experimental magnetic data were simulated by using appropriate models.