Determination of the debris produced from poly(ethylene terephthalate) during KrF excimer laser ablation

Pulsed UV laser beams, which are widely used in the processing of polymers, have many advantages because their photon energy is higher than the binding energy of polymers. Fabricating polymers with a UV laser process is faster, cleaner, and more convenient than with other processes. Nevertheless, some problems occur in the precision microprocessing of polymers. For example, the formation and deposition of surface debris, which is produced from the breakdown of either polymer chains or radical bonds.To determine the formation and origin of surface debris, a KrF excimer laser beam (248 nm) was used in the processing of poly(ethylene terephthalate) (PET). The investigation of the debris formation was facilitated by UV-vis spectroscopy, ATR FT-IR spectroscopy, and NMR spectroscopy. The UV-vis absorption peak indicates that the primary chromophore in the PET is benzoate. Furthermore, because benzoate causes the primary absorption, the absorbed energy is transferred by heat generation to an unsaturated ester. The ATR FT-IR spectrometer measurements show that the phenyl systems in the benzoate are demolished by ablation. This phenomenon indicates that the photochemical reaction causes the benzoate bonds to break down, and this breakdown in turn causes the carbonization to leave debris on the PET.     

Microlens array diffuser for a light-emitting diode backlight system

Microlens array (MLA) diffusers for light-emitting diode (LED) backlight systems have been developed. A high fill-factor photoresist mold for the MLA was fabricated using three-dimensional diffuser lithography, and the patterns were transferred to a nickel master mold for UV-curable polymer replication. The fabricated microlens had various paraboloidal profiles, and its aspect ratio was controlled from 1.0 to 2.1. The MLA diffuser showed a batwing radiation pattern with a radiation angle of 150 degrees. The fabricated MLA diffuser may greatly enhance the color-mixing characteristics of LED backlight systems and help reduce the number of LEDs required.     

Capillary filling of anodized alumina nanopore arrays

The filling behavior of a room temperature solvent, perfluoromethylcyclohexane, in approximately 20 nm nanoporous alumina membranes was investigated in situ with small angle x-ray scattering. Adsorption in the pores was controlled reversibly by varying the chemical potential between the sample and a liquid reservoir via a thermal offset, DeltaT. The system exhibited a pronounced hysteretic capillary filling transition as liquid was condensed into the nanopores. These results are compared with Kelvin-Cohan theory, with a modified Derjaguin approximation, as well as with predictions by Cole and Saam.     

Abnormal adsorption behavior of dimethyl disulfide on gold surfaces

Adsorption of dimethyl disulfide (DMDS) on gold colloidal nanoparticle surfaces has been examined to check its binding mechanism. Differently from previous results, DMDS molecules adsorbed on the gold surface at high concentration showed the S–S stretching band at 500 cm⁻¹ in surface-enhanced Raman scattering (SERS) spectra, which indicates the presence of intact adsorption of DMDS molecules. However, it was found that the S–S bond of disulfides was easily cleaved on the gold surface at low concentration. These behaviors were not observed for diethyl disulfide (DEDS) or diphenyl disulfide (DPDS). Our results indicate that DMDS molecules with the shortest alkyl chains on the gold surface can be inserted into self-assembled monolayers (SAMs) without the S–S bond cleavage during self-assembly due to insufficient lateral van der Waals interaction and the low adsorption activity of disulfides, whereas DEDS with longer alkyl chains or DPDS with the weak disulfide bond dissociation energy would not. These unusual DMDS adsorption behaviors were examined by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). We also compared the bonding dissociation energy of the S–S bonds of various disulfides by means of a density functional theory (DFT) calculation.     

Bandwidth-tunable band-rejection filter based on helicoidal fiber grating pair of opposite helicities

We have developed a new type of all-fiber band-rejection filter consisting of a helicoidal long-period fiber grating pair of opposite helicities, which provides highly flexible spectral control over the rejection bandwidth. The detailed fabrication method and operation principles of the proposed bandwidth-tunable band-rejection filter are described. The proposed device enables unique rejection bandwidth tuning over more than 14 nm at the rejection level of 15 dB, with low insertion loss and polarization-dependent loss achieved by adjusting torsion stress.     

Study for noise reduction in synchrotron radiation based scanning tunneling microscopy by developing insulator-coat tip

To solve difficulties of instability and inaccuracy in synchrotron radiation based scanning tunneling microscopy, a method to reduce noise was investigated. New insulator-coat tips were developed to shut out electrons coming from a wide area that damage the spatial resolution. By changing the exposed conductive area at the end of the insulator-coat tips, the effect of noise reduction was estimated. The tip with an exposure area of 50 nm in diameter was found to reduce noise effectively. Also a key discriminating condition was found to obtain the local signal, which is based on the modulation of the X-ray-induced tip current caused by excitation of the specific element.     

Nature of the well screened state in hard X-ray Mn 2p core-level photoemission measurements of La1-xSrxMnO3 films

Using hard x-ray (HX; hnu=5.95 keV) synchrotron photoemission spectroscopy (PES), we study the intrinsic electronic structure of La(1-x)Sr(x)MnO(3) (LSMO) thin films. Comparison of Mn 2p core-levels with soft x-ray (SX; hnu approximately 1000 eV) PES shows a clear additional well-screened feature only in HX PES. Takeoff-angle dependent data indicate its bulk (> or =20 A) character. The doping and temperature dependence track the ferromagnetism and metallicity of the LSMO series. Cluster model calculations including charge transfer from doping-induced states show good agreement, confirming this picture of bulk properties reflected in Mn 2p core-levels using HX PES.     

A possibility of parallel and anti-parallel diffraction measurements on neutron diffractometer employing bent perfect crystal monochromator at the monochromatic focusing condition

In a conventional diffractometer having single monochromator, only one position, parallel position, is used for the diffraction experiment (i.e. detection) because the resolution property of the other one, anti-parallel position, is very poor. However, a bent perfect crystal (BPC) monochromator at monochromatic focusing condition can provide a quite flat and equal resolution property at both parallel and anti-parallel positions and thus one can have a chance to use both sides for the diffraction experiment. From the data of the FWHM and the Δd/d measured on three diffraction geometries (symmetric, asymmetric compression and asymmetric expansion), we can conclude that the simultaneous diffraction measurement in both parallel and anti-parallel positions can be achieved.     

Phase Measurement Algorithm in Wavelength Scanned Fizeau Interferometer

Wavelength scanned interferometry allows the simultaneous measurement of top surface shape and optical thickness variation of a transparent object consisting of several parallel surfaces. Interference signals from these surfaces can be separated in frequency space, and their phases are detected by discrete Fourier analysis. However, these signal frequencies are shifted from the detection frequency by the refractive index dispersion of the object and a nonlinearity of the wavelength scanning. The Fourier analysis is sensitive to the detuning of the signal frequency and suffers from the multiple-beam interference noise. Conventional error-compensating algorithms cannot be applied to an object consisting of more than three reflecting surfaces. We derive a new 2N-1 sample error-compensating algorithm, which allows the phase detection of any order of harmonic frequency among the interference signals. The new algorithm suppresses the effect of signal frequency detuning as well as the multiple-beam interference noise and can be applied to the measurement of complex objects consisting of more than three reflecting surfaces.