New synthesis of 3′-deoxypurine nucleosides using samarium(III) iodide complex

Regio- and stereoselective iodinative cleavage of 2′,3′-anhydropurine nucleosides was achieved with samarium diiodide and ethyl bromoacetate to produce the corresponding 3′-iodopurine nucleosides, which were then converted to 3′-deoxypurine nucleosides including the natural product cordycepin.     

First preparation of biotinylated gradient polyethylene surface to bind photoactive caged streptavidin

A gradient polyethylene (PE) surface was created through corona treatment, in which the corona power increased along the 5 cm length of the PE. The gradient surface was treated with polyethyleneimine and then biotin. Fluorescein-conjugated streptavidin (SAV) caged within 5-carboxymethoxy-2-nitrobenzyl (CMNB) adsorbed onto the biotinylated gradient PE surface following molecular recognition principles. Photoirradiation decomposed the CMNB cage and allowed the fluorescein-conjugated SAV to fluoresce, the intensity of which increased gradually along the PE surface.     

Lithium isotope separation by chemical exchange with polymer-bound azacrown compounds

The chromatographic separation of lithium isotopes was investigated by chemical exchange with the recently synthesized polymer-bound dibenzo pyridino diamide azacrown (DBPDA) and reduced dibenzo pyridino diamide azacrown (RDBPDA). Column chromatography was employed for the determination of the effect of solvents and ligand conformation on the separation coefficients. The maximum separation coefficients, , for the DBPDA and RDBPDA at 20.0±0.02°C with acetonitrile as eluent, were found to be 0.034±0.002 and 0.035±0.002, respectively. The isotope separation coefficient and adsorption capability of the lithium ion on the DBPDA and RDBPDA were only slightly dependent on ligand structure, but strongly dependent on the solvent. DBPDA and RDBPDA appeared to have almost the same value for the isotope separation coefficient of lithium.     

Identification of flavonoids using liquid chromatography with electrospray ionization and ion trap tandem mass spectrometry with an MS/MS library

Searchable MS/MS spectra libraries, constructed using the results of liquid chromatography coupled with electrospray ionization (ESI) tandem mass spectrometry (LC/MS/MS) with data-dependent acquisition on an ion trap mass spectrometer, are presented with regard to the identification and confirmation of a variety of closely related flavonoids in a set of biological samples. Flavonoids were found to exhibit a maximum amount of structurally specific MS/MS spectra at 45% of normalized collision energy on the instrument used, without wideband activation. These MS/MS spectra were then searched automatically against a 297-substance MS/MS library that contains many previously acquired spectra of standard flavonoids. The possible applications of this powerful technique to biological samples are also discussed. Daidzein and genistein were identified through the MS/MS spectra library while searching through LC/MS/MS data for plant and microbial extracts. Moreover, these compounds proved completely distinguishable from other flavonoids of closely related structures in the MS/MS spectra library, using the NIST MS search program. The applicability of the library-searchable spectra at low concentrations was demonstrated by successful identification of daidzein and genistein at 0.05 and 0.5 microg/mL, respectively.     

catena‐Poly[[copper(II)‐μ‐2‐[bis­(2‐pyridylmeth­yl)amino]butyrato‐κ4N,N′,N′′,O:κO′] perchlorate]

The copper(II) ion in the syn–anti carboxyl­ate‐bridged one‐dimensional zigzag chain title complex, {[Cu(C₁₆H₁₈N₃O₂)]ClO₄}_n, exhibits a distorted trigonal–bipyramidal environment. Two N atoms and one carboxyl­ate O atom of the ligand form the basal plane, while the axial positions are filled by an N atom of the ligand and one O atom belonging to the carboxyl­ate group of an adjacent mol­ecule. The crystal packing is enhanced by C—H⋯O(perchlorate) hydrogen bonds.     

Preparation of isoprostanes and neuroprostanes

A new approach to isoprostanes and neuroprostanes featuring cis-dialkyl stereochemistry at the cyclopentane ring has been developed by employing an intramolecular cross-coupling reaction of an alkyl iodide and a tethered alkenylsiloxane for stereoselective installation of a functionalized omega-side chain.     

Xanthine Sensors Based on Anodic and Cathodic Detection of Enzymatically Generated Hydrogen Peroxide

A xanthine biosensor was fabricated by the covalent immobilization of xanthine oxidase (XO) onto a functionalized conducting polymer (Poly‐5, 2′: 5′, 2″‐terthiophine‐3‐carboxylic acid), poly‐TTCA through the formation of amide bond between carboxylic acid groups of poly‐TTCA and amine groups of enzyme. The immobilization of XO onto the conducting polymer (XO/poly‐TTCA) was characterized using cyclic voltammetry, quartz crystal microbalance (QCM), and X‐ray photoelectron spectroscopy (XPS) techniques. The direct electron transfer of the immobilized XO at poly‐TTCA was found to be quasireversible and the electron transfer rate constant was determined to be 0.73 s^?1. The biosensor efficiently detected xanthine through oxidation at +0.35 V and reduction at ?0.25 V (versus Ag/AgCl) of enzymatically generated hydrogen peroxide. Various experimental parameters, such as pH, temperature, and applied potential were optimized. The linear dynamic ranges of anodic and cathodic detections of xanthine were between 5.0×10^?6?1.0×10^?4 M and 5.0×10^?7 to 1.0×10^?4 M, respectively. The detection limits were determined to be of 1.0×10^?6 M and 9.0×10^?8 M with anodic and cathodic processes, respectively. The applicability of the biosensor was tested by detecting xanthine in blood serum and urine real samples.     

End-labeled free-solution electrophoresis of DNA

DNA is a free-draining polymer. This subtle but "unfortunate" property of highly charged polyelectrolytes makes it impossible to separate nucleic acids by free-flow electrophoresis. This is why one must typically use a sieving matrix, such as a gel or an entangled polymer solution, in order to obtain some electrophoretic size separation. An alternative approach consists of breaking the charge to friction balance of free-draining DNA molecules. This can be achieved by labeling the DNA with a large, uncharged molecule (essentially a hydrodynamic parachute, which we also call a drag-tag) prior to electrophoresis; the resulting methodology is called end-labeled free-solution electrophoresis (ELFSE). In this article, we review the development of ELFSE over the last decade. In particular, we examine the theoretical concepts used to predict the ultimate performance of ELFSE for single-stranded (ssDNA) sequencing, the experimental results showing that ELFSE can indeed overcome the free-draining issue raised above, and the technological advances that are needed to speed the development of competitive ELFSE-based sequencing and separation technologies. Finally, we also review the reverse process, called free-solution conjugate electrophoresis (FSCE), wherein uncharged polymers of different sizes can be analyzed using a short DNA molecule as an electrophoretic engine.     

Synthesis of nanosized TiO2/SiO2 particles using microwave processes and their photocatalytic activity on the decomposition of orange II

The nanosized titania and TiO₂/SiO₂ particles were prepared by the microwave-hydrothermal method. The effect of physical properties TTIP/TEOS ratio and calcination temperature has been investigated. The major phase of the pure TiO₂ particle is of the anatase structure, and a rutile peak was observed above 800°C. In TiO₂/SiO₂ particles, however, no significant rutile phase was observed, although the calcination temperature was 900°C. No peaks for the silica crystal phase were observed at either silica/titania ratio. The crystallite size of TiO₂/SiO₂ particles decreases as compared to pure TiO₂ at high calcination temperatures. The TiO₂/SiO₂ particles show higher activity on the photocatalytic decomposition of orange II as compared to pure TiO₂ particles.     

Pt‐Nanoparticle Incorporated Carbon Paste Electrode for the Determination of Cu(II) Ion by Anodic Stripping Voltammetry

Pt‐nanoparticles were synthesized and introduced into a carbon paste electrode (CPE), and the resulting modified electrode was applied to the anodic stripping voltammetry of copper(II) ions. The synthesized Pt‐nanoparticles were characterized by cyclic voltammetry, scanning electron microscopy and X‐ray photoelectron spectroscopy techniques to confirm the purity and the size of the prepared Pt‐nanoparticles (ca. 20 nm). This incorporated material seems to act as catalysts with preconcentration sites for copper(II) species that enhances the sensitivity of Cu(II) ions to Cu(I) species at a deposition potential of ?0.6 V in an aqueous solution. The experimental conditions, such as, the electrode composition, pH of the solution, pre‐concentration time, were optimized for the determination of Cu(II) ion using as‐prepared electrode. The sensitivity changes on the different binder materials and the presence of surfactants in the test solution. The interference effect of the coexisted metals were also investigated. In the presence of surfactants, especially TritonX‐100, the Cu(II) detection limit was lowered to 3.9×10^?9 M. However, the Pt‐nanoparticle modified CPE begins to degrade when the period of deposition exceeds to 10 min. Linear response for copper(II) was found in the concentration range between 3.9×10^?8 M and 1.6×10^?6 M, with an estimated detection limit of 1.6×10^?8 M (1.0 ppb) and relative standard deviation was 4.2% (n=5).