Highly efficient mesoporous WO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/KIT-6 catalysts for oxidative desulfurization of dibenzothiophene with hydrogen peroxide

Oxidative desulfurization (ODS) of organic compounds containing sulfur element from a model oil was performed using tungsten oxide catalysts supported on mesoporous silica with cubic Ia3d mesostructure, well-defined mesopores (7.2 nm), high surface area (719 m²/g), and three-dimensional pore network (WO _x /KIT-6). The prepared WO _x /KIT-6 catalysts (5–20 wt% WO _x ) were characterized by X-ray diffraction analysis, N₂ sorption measurements, electron microscopy, H₂-temperature programmed reduction, Raman spectroscopy, and thermogravimetric analysis. Among the mesoporous catalysts, 10 wt% WO _x /KIT-6 exhibited the best catalytic performance. Sulfur-containing organic compounds, such as dibenzothiophene, 4,6-dimethyldibenzothiophene, and benzothiophene, were completely (100 %) removed from the model oil over 10 wt% WO _x /KIT-6 catalyst in 2 h. In addition, the catalyst could be reused several times with only slight decrease in catalytic activity.     

Synergistic effect of fluorination on both donor and acceptor materials for high performance non-fullerene polymer solar cells with 13.5% efficiency

A high performance polymer solar cells(PSCs) based on polymer donor PM6 containing fluorinated thienyl benzodithiophene unit and n-type organic semiconductor acceptor IT-4 F containing fluorinated end-groups were developed. In addition to complementary absorption spectra(300–830 nm) with IT-4 F, the PM6 also has a deep HOMO(the highest occupied molecular) level(-5.50 e V), which will lower the open-circuit voltage(V_(oc)) sacrifice and reduce the E_(loss) of the IT-4 F-based PSCs. Moreover, the strong crystallinity of PM6 is beneficial to form favorable blend morphology and hence to suppress recombination. As a result, in comparison with the PSCs based on a non-fluorinated D/A pair of PBDB-T:ITIC with a medium PCE of 11.2%, the PM6:IT-4 Fbased PSCs yielded an impressive PCE of 13.5% due to the synergistic effect of fluorination on both donor and acceptor, which is among the highest values recorded in the literatures for PSCs to date. Furthermore, a PCE of 12.2% was remained with the active layer thickness of up to 285 nm and a high PCE of 11.4% was also obtained with a large device area of 1 cm~2. In addition, the devices also showed good storage, thermal and illumination stabilities with respect to the efficiency. These results indicate that fluorination is an effective strategy to improve the photovoltaic performance of materials, as well as the both fluorinated donor and acceptor pair-PM6:IT-4 F is an ideal candidate for the large scale roll-to-roll production of efficient PSCs in the future.     

Polymer network liquid crystal grating/Fresnel lens fabricated by holography

In this article, polymer network liquid crystal (PNLC) grating/Fresnel lens is fabricated by holography. The exposure light pattern for the grating is obtained by interfering two planar wave fronts, while the Fresnel pattern is achieved by interfering a planar wave front and a spherical wave front. Owing to the alignment effect and anchoring power of polymer network, the holographic PNLC grating achieves improved diffraction efficiency, and remarkably reduced operation voltage (reduced by 80%) compared with holographic polymer-dispersed-liquid-crystal and holographic polymer-stabilised blue-phase liquid-crystal gratings, while maintaining submillisecond response. Moreover, it achieves high spatial frequency with a 2-μm grating period, thanks to the holographic fabrication. The holographic PNLC Fresnel lens also exhibits attractive electro-optical properties.     

Calix[4]arene-based fluorescent probe and the adsorption capacity of its electrospun nanofibrous film for the cesium cation as an adsorbent

Calix[4]arene-based cation receptor 1 has been synthesised by following a multi-step synthetic procedure. The fluorescence properties of 1 upon the addition of various metal ions were investigated by fluorescence spectroscopy. As a result, it was revealed that 1 displayed dramatic quenching effect upon the exposure to Cs⁺. In contrast, no significant quenching effects were observed upon the addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ag⁺, Zn²⁺ and Ni²⁺. Compound 1 was also found by Job plot to form a 1:1 complex with Cs⁺. In addition, we also prepared 1-embedded electrospun nanofibrous film (NF-1) as an adsorbent for Cs⁺. NF-1 is proved to adsorb Cs⁺ effectively from an aqueous solution, indicating that it would be usefully utilised as an adsorbent to remove Cs⁺.     

超高效液相色谱-三重四极杆质谱法测定食品中34种非法添加减肥类化合物

建立了超高效液相色谱-三重四极杆质谱测定食品(含保健食品)中34种减肥类非法添加化合物的方法。采用Waters CORTECS T3色谱柱(100 mm×2.1 mm,2.7μm),以0.1%(v/v)甲酸水溶液-含0.1%(v/v)甲酸的乙腈溶液为流动相,梯度洗脱,在电喷雾离子源、正离子或负离子模式下以多反应监测(MRM)方式检测。西布曲明等29种化合物在0.5~10μg/L范围内、氯噻嗪等5种化合物在2.5~50μg/L范围内均呈良好的线性关系,相关系数(r)均大于0.99;西布曲明等29种化合物在5、10和20μg/kg添加水平下的平均加标回收率为49.2%~136.2%,相对标准偏差(RSD)为0.7%~15.0%(n=6),氯噻嗪等5种化合物在25、50和100μg/kg添加水平下的平均加标回收率为51.5%~130.9%,RSD为0.8%~14.0%(n=6);西布曲明等29种化合物的检出限为5μg/kg,定量限为10μg/kg,氯噻嗪等5种化合物的检出限为25μg/kg,定量限为50μg/kg。本方法已应用于实际样品的测定,共检出了12种化合物,有效打击了非法添加行为。     

Enzyme-free colorimetric assay for mercury(II) using DNA conjugated to gold nanoparticles and strand displacement amplification

The authors describe a colorimetric method for the determination of Hg(II) ion. It is based on the color change from red to colorless as displayed by gold nanoparticle (AuNP) modified with thymine - rich DNA. Signal amplification is accomplished by free strand displacement recycling. In this strategy, Hg(II) unfolds the arch-trigger duplex due to the high affinity between Hg(II) and the thymines to form T-Hg(II)-T structures, thereby causing the release of trigger. The liberated trigger unfolds the hairpin structure of H1, and unfolded H1 further unfolds with H2. As a result, the H2 hairpin displaces trigger, and the released trigger unfolds another H1. This results in strong and enzyme-free strand displacement recycling amplification. The aggregation of DNA-AuNPs occurs in the presence of the duplex formed by hairpins H2 and H1. This results in a color change from red to colorless that can be visually observed. Under optimal conditions, the assay has a detection range over 4 orders of magnitude and a 3.4 nM detection limit. The assay is selective, sensitive, rapid and cost-effective. In our perception, it represents a useful platform for determination of Hg(II).

Open image in new window

Graphical abstract Schematic presentation of the  simple, rapid, low cost colorimetric detection of mercury(II) based on enzyme-free strand displacement amplification along with DNA-labeled AuNP.