分散固相萃取/高效液相色谱法测定鸡蛋中对位红与苏丹红染料残留

建立了一种分散固相萃取结合高效液相色谱法测定鸡蛋样品中对位红及苏丹红Ⅰ^Ⅳ染料残留的分析方法。样品经正己烷超声提取,二醇基（Diol）硅胶吸附富集,乙腈洗脱后在Phenomenex Luna C₁₈色谱柱（50 mm×2.0 mm,5μm）上以乙腈-水为流动相梯度洗脱,在500 nm波长处检测,外标法定量。5种染料在0.1¹0.0 mg·L^-1范围具有良好的线性,相关系数均大于0.999,在低、中、高3个加标水平的平均回收率为81.2%⁹4.2%,相对标准偏差为3.4%⁵.3%,检出限为0.018⁰.030 mg·kg^-1,定量下限为0.06⁰.10 mg·kg^-1。建立的方法准确快速,可用于鸡蛋中对位红和苏丹红类染料残留的快速检测。     

Enhanced orientation of PEO polymer chains induced by nanoclays in electrospun PEO/clay composite nanofibers

Polymer fibers composed of poly(ethylene oxide) (PEO) and nanoclay were fabricated by electrospinning. The morphology of the composite nanofibers was characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM), which showed aligned nanoclays in the fibers. Polarized Fourier transform infrared (FT-IR) spectroscopy revealed that the PEO chains in the composite fibers exhibit a higher degree of orientation than that in PEO nanofibers containing no nanoclay. It is believed that spatial confinement is present in the electrospun nanofibers, which results in the enforcement of the mutual restriction. The anisotropic hierarchical nanostructure may have potential applications in optics, mechanical materials, and biomedical materials for cell culture.     

气相色谱-三重四极杆串联质谱法快速测定蔬菜水果中129种农药的残留量

采用QuEChERS方法结合气相色谱-串联质谱法(GC-MS/MS)建立了蔬菜、水果中129种农药残留同时检测的分析方法。试样用1%乙酸乙腈均质提取,采用混合型固相分散萃取剂净化后,用GC-MS/MS在多反应离子监测(MRM)模式下进行检测,外标法定量。结果表明,129种药物在一定的含量范围内线性关系良好,相关系数(r2)均大于0.98;不同基质在10 μg/kg添加水平下大部分农药的平均回收率为66.2%～124.7%,相对标准偏差(RSD)为0.9%～24.4%;方法的定量限(LOQ)为0.03～16.7 μg/kg。结果表明,该方法简便快速、灵敏可靠、经济有效,适用于蔬菜、水果中农药多残留的同时快速筛查测定。     

Effects of Ag–La codoping on structure and electrical properties of BaTiO3 powder

Ag–La codoped BaTiO₃ powders were prepared by sol–gel technology after the preparation of Ag-doped and La-doped BaTiO₃ powders. Variations in the structure, constitution, morphology, and electrical properties of the modified BaTiO₃ powders were characterized. It can be concluded that Ag–La codoping decreases the resistivity of the modified powders more significantly than Ag doping and La doping, respectively. The sample with the lowest resistivity was obtained by codoping with 0.1 at.% Ag and 0.3 at.% La, where the resistivity decreased to 7.13 × 10² Ω m from the value of 4.30 × 10⁹ Ω m of the undoped powder. X-ray diffractometry (XRD) and Fourier-transform infrared (FTIR) analyses indicate that the main phase of the codoped powders transitions from tetragonal to cubic with increasing La doping content. Scanning electron microscopy (SEM) observations illustrate that codoping makes the particles distribute more equably. The relationship between the resistivity and the structure of the doped BaTiO₃ powders is discussed based on defect chemistry.     

Dual template method to prepare hierarchical porous carbon nanofibers for high-power supercapacitors

Hierarchical porous carbon nanofibers serving as electrode materials are prepared through carbonization and hydrofluoric acid treatment of polyacrylonitrile-based electrospinning involving dual templates. The hierarchical porous structures are synergistically tailored by varying template contents in the spinning solution. The carbon nanofibers prepared from the electrospinning of polyacrylonitrile containing 15/15 wt.% polymethylmethacrylate/tetraethyl orthosilicate exhibit the largest specific surface area (699 m² g^?1) and microporous volume (0.196 cm³ g^?1). In 6 M KOH electrolyte, a symmetrical supercapacitor equipped with the hierarchical porous carbon nanofibers demonstrates its high-end specific capacitance of 170 F g^?1, superior rate capability, and high-power density output up to 14.7 kW kg^?1. Cycling evolution indicates capacitance fading is only 5.8 % of initial capacitance at a current density of 1 A g^?1 even after 8,000 cycles. The excellent electrochemical performances of the carbon nanofiber are mainly ascribed to the optimized pore size distributions of both micropores and mesopores and the unique hierarchical pore structures possessed by abundant micropores.     

Structure and interaction between the [BMIM][Ala] alanine anion and the 1-butyl-3-methylimidazolium cation in ion pairs

The equilibrium geometries and vibrational frequencies of the ionic liquid 1-butyl-3-methylimidazolium cation and the alanine anion [BMIM][Ala] are studied using density functional theory (DFT) at the B3PW91/6-311+G(d,p) leve1. The most stable structures of the anion, the cation, and the ion pairs are obtained and characterized, and the geometry parameters of the ion pairs confirm the presence of a hydrogen bonding interaction between the anion and the cation. Natural bond orbital (NBO) analysis is also performed to analyze the atomic charge distribution and charge transfer in the [BMIM]⁺ cation and [BMIM][Ala] ionic liquids. The results show that there are the electrostatic interaction and multiple hydrogen bond interactions between the cation and the anion of the ionic liquids, and the stability of the ground state of the ion pairs mostly results from the hydrogen bonding between the lone pairs of O atoms in the anion and H in the imidazole cycle of the cation. There are some changes in microstructures and the charge distribution during the formation of the ion pairs.     

Dynamic Changes in Xylanases and β-1,4-Endoglucanases Secreted by Aspergillus niger An-76 in Response to Hydrolysates of Lignocellulose Polysaccharide

Aspergillus niger is an effective secretor of glycoside hydrolases that facilitate the saprophytic lifestyle of the fungus by degrading plant cell wall polysaccharides. In the present study, a series of dynamic zymography assays were applied to quantify the secreted glycoside hydrolases of A. niger cultured in media containing different carbon sources. Differences in the diversity and concentrations of polysaccharide hydrolysates dynamically regulated the secretion of glycoside hydrolases. The secretion of β-1,4-endoglucanase isozymes was observed to lag at least 24 h behind, rather than coincide with, the secretion of xylanase isozymes. Low concentrations of xylose could induce many endoxylanases (such as Xyn1/XynA, Xyn2, and Xyn3/XynB). High concentrations of xylose could sustain the induction of Xyn2 and Xyn3/XynB but repress Xyn1/XynA (GH10 endoxylanase), which has a broad substrate specificity, and also triggers the low-level secretion of Egl3/EglA, which also has a broad substrate specificity. Mixed polysaccharide hydrolysates sustained the induction of Egl1, whereas the other β-1,4-endoglucanases were sustainably induced by the specific polysaccharide hydrolysates released during the hydrolysis process (such as Egl2 and Egl4). These results indicate that the secretion of glycoside hydrolases may be specifically regulated by the production of polysaccharide hydrolysates released during the process of biomass degradation.     

十六烷基三羟乙基溴化铵促进1-辛烯氢甲酰化水/有机两相反应研究

研究了水/有机两相体系中表面活性剂十六烷基三羟乙基溴化铵(CTHAB)对Rh/TPPTS (TPPTS: 三[间-磺酸钠基苯基]膦)催化的1-辛烯氢甲酰化反应的促进作用, 初步证实了CTHAB分子中的羟基可与催化活性物种的铑之间发生配位. 与传统表面活性剂十六烷基三甲基溴化铵(CTAB)相比, 表面活性剂CTHAB的添加不仅加速了水/有机两相1-辛烯氢甲酰化反应, 而且提高了成醛的正/异比, 促进作用明显. 在 [Rh]=0.8 mmol/L, [TPPTS]/[Rh]=40, [CTHAB]=4.0 mmol/L, 90 ℃, 0.5 MPa, 1.5 h时, 生成醛的TOF为497 h^-1, 正/异比(L/B)可达25.6. 催化剂经7次循环后, 反应活性和成醛正/异比无明显下降. 该催化体系对不同长链烯烃氢甲酰化反应同样具有促进作用.     

咪唑四氟硼酸盐离子液体中磷钼酸掺杂聚吡咯薄膜修饰电极的制备及其电催化活性

以1-丁基-3-甲基咪唑四氟硼酸盐(BMIMBF4)离子液体作为介质,利用电化学方法在铂电极表面制备了磷钼酸掺杂聚吡咯薄膜;采用扫描电子显微镜观察了所制备的薄膜的形貌,利用热重分析评价了其热稳定性,利用循环伏安法测定了其电化学活性和对甲醇的电催化氧化活性.结果表明,与传统的硫酸溶液相比,以BMI-MBF4离子液体作为反应介质制备的修饰电极的表面形貌更均匀,电化学活性和对甲醇的电催化氧化活性更强.     

槲皮素在氧化锆修饰玻碳电极上的伏安行为及检测

制备了氧化锆修饰的玻碳电极,采用示差脉冲伏安法和循环伏安法探究了槲皮素在该电极上的电化学行为。结果表明,制备的修饰电极在pH=7.00的磷酸盐缓冲溶液（PBS）中对槲皮素的氧化还原具有明显的电催化作用。采用槲皮素的氧化峰电流作为分析信号。在浓度为2.5×10-8~5×10-5 mol/L的范围内,氧化峰电流和浓度成良好的线性关系,线性方程为ip（μA）=0.0825c-9.861 84,检出限为5.35×10-9 mol/L。