Stereocontrolled synthesis of bicyclic lactone derivatives via tungsten-mediated [3 + 2] cycloaddition of epoxides with a tethered alkynyl group

In the presence of BF3*Et2O, alkynyltungsten complexes underwent [3 + 2] cycloaddition with tethered epoxides to give bicyclic -lactones efficiently. Only one diastereomeric product was formed despite the presence of three stereogenic centers. A mechanism is proposed that involves formation of a tungsten-vinylidenium species via an SN2 attack of the epoxide carbon by an alkynyltungsten group to give a tungsten-enol ether species via counterattack at the central tungsten-vinylidenium carbon by the OBF3- terminus. Most of the tungsten enol ether species were too unstable for isolation and underwent hydrolysis to give only cis-fused -bicyclic lactones. This cyclization works for both cis- and trans-epoxides and tolerates various functional groups. In the case of trans-phenyl epoxide, the reaction led to an addition product via a 6-endo attack of epoxide by the tungsten fragment. This method provides a simple enantiospecific synthesis of complex bicyclic lactones if a chiral epoxide is used in the cyclization. It is also applicable to the one-pot synthesis of bicyclic unsaturated gamma-lactones if a suitable alkynyltungsten functionality is used.     

Molecular dynamics simulations of the dinuclear zinc-beta-lactamase from Bacteroides fragilis complexed with imipenem

Herein, we present results from MD simulations of the Michaelis complex formed between the dizinc beta-lactamase from B. fragilis and imipenem. We considered two catalytically important configurations, which differ in the presence or absence of a hydroxide bridge connecting the two zinc ions in the active site. The structural and dynamical effects induced by substrate binding, the specific roles of the conserved residues and the zinc-bound water molecules, the near attack conformers of the Michaelis complex, and so forth, are discussed in detail. The relative stability of the two configurations was estimated from QM linear scaling calculations on the enzyme-substrate complex combined with Poisson-Boltzmann electrostatic calculations and normal mode calculations. Importantly, we find that the two configurations have similar energies, indicating that these two structures could readily be interchanged, thereby facilitating catalysis. The configuration with the hydroxide bound to the two zinc ions is predicted to be the resting form of the enzyme, while the configuration without the bridge is the reactive form that was found to place the hydroxide in position to attack the carbonyl of the beta-lactam ring. Thus, we propose that the enzyme initiates catalysis by converting from the hydroxide bridge form into the configuration that lacks the hydroxide bridge. This interconversion increases the nucleophilicity of the hydroxide ion and exposes it to the beta-lactam carbonyl, which ultimately facilitates nucleophilic attack. The implications of the observed modes of binding, the possible influence of mutating the Lys184 and Asn193 residues on substrate binding, and the reaction mechanism are also discussed in detail.     

低价钒化合物结构化学研究 Ⅰ. [VCL2·(THF)4]+[ZnCl3·THF]-的合成与晶体结构

The title compound has been synthesized under nitrogen atmosphere using V_2O_5 for the initiator by Schlenk techniques. It′s single crystal, which is very air and water-sensitive, was obtained and determined from three-dimensinal x-ray diffraction data collected by the four-circle diffractometer. The crystals are orth- orhombic with space group D_2~4-P_(212121) and unit cell constants a=0.909 nm, b=1.4909 nm, c=2.1635 nm and z=4. We derived first the positional parameters of V, Zn, Cland O atoms by direct method using SHELXTL program. The coordinates of other the non-hyleast-squares refinement for all atoms gave a final discrepency factor R=0.0945 and RW=0.0674.The result of structure analysis shows that the compound is composed of the octahedral cation [VCl_2·(THF)_4]~+ and the tetrahedral anion [ZnCl_3·THF]~-.The reaction mechanism was discussed. The title compound is reaction product of VCl_3 with ZnCl_2 in THF.     

Solvent-modulated chemoselective deprotections of trialkylsilyl esters and chemoselective esterifications

A series of trialkylsilyl esters were deprotected or transesterificated into their corresponding carboxylic acids or methyl esters under a catalytic amount of CBr₄ in alcohol reaction system. This method enables to desilylate secondary sp³-carbon, sp²-carbon, sp-carbon and aryl tethered trialkylsilyl esters to carboxylic acids, whereas primary sp³-carbon tethered trialkylsilyl esters were further converted into their methyl esters under CBr₄/MeOH reaction conditions. The highly chemoselective deprotections can be modulated and achieved by the introduced protecting trialkylsilyl groups and the used alcohols such as MeOH and EtOH under this photochemically-induced reaction conditions.     

Synthesis of poly(<Emphasis Type="Italic">N</Emphasis>-methylolacrylamide)/polymethylacrylamide hybrids via frontal free-radical polymerization

In this study, poly(N-methylolacrylamide)/polymethylacrylamide (PNMA/PMAA) hybrids were produced successfully by frontal free-radical polymerization at ambient pressure. In a typical run, the appropriate amounts of reactants (N-methylolacrylamide, NMA; methylacrylamide, MAA) and initiator (ammonium persulfate) were dissolved in dimethyl sulfoxide at ambient temperature. Frontal polymerization (FP) was initiated by heating the wall of the tube with a soldering iron, and the resultant hot fronts were allowed to self-propagate throughout the reaction vessel. Once initiated, no further energy was required for polymerization to occur. The dependences of the front velocity and front temperature on the initiator concentration, reactant dilution, and NMA/MAA components were thoroughly investigated. The front temperatures were between 69 and 116 °C, depending on the persulfate concentration. We have also investigated the FP of PNMA/PMAA hybrids with N-methyl-2-pyrrolidone as solvent. Results show that FP can be exploited as a means for the preparation of PNMA/PMAA hybrids with the potential advantage of higher throughput compared to the traditional mode.     

Differential pulse voltammetric determination of arsenic(III,V) and antimony (III,V) in glasses

Summary Analytical methods based on differential pulse voltammetry (DPV) have been described for the determination of total As, As(III), As(V), total Sb and Sb(III) as trace to minor constituents in complex glasses. For total As, the sample is decomposed with HF-H₂SO₄-KMnO₄. The As(V) is chemically reduced to As (III) by hypophosphite and a DPV scan is carried out at the dropping mercury electrode from –0.2 to –0.7 Vvs. SCE (E _p –0.41V). As(V) is determined by decomposing the sample in HF-H₂SO₄ and volatilizing the As(III) as AsF₃. The chemical reduction of As(V) and the DPV scan are then applied. If the glass can be decomposed with cold HF, the As(III) present in the glass can be determined by applying the DPV scan after cold sample-dissolution. For Sb(III), the sample is decomposed with HF-H₂SO₄, diluted, and adjusted to 1M in HCl. A DPV scan is conducted from –0.03 to –0.5 V (E _p –0.15 V). Sb(V) is not reduced in the 1M HCl supporting electrolyte. Total Sb is determined by using an aliquot of the sample solution adjusted to 6M in HCl. The DPV sweep is carried out from –0.5 to –0.1 V [E _p for Sb(V) and Sb(III) is –0.30 V]. The methods have been applied to a wide range of glass compositions and the results compared with values obtained by spectrophotometry and coulometric titration.

---

Bestimmung von Arsen(III, V) und Antimon(III, V) in Gläsern mit Hilfe der Differential-Puls-Voltammetrie

Zusammenfassung Analytische Methoden auf der Grundlage der Differential-Puls-Voltammetrie (DPV) für die Bestimmung des gesamten Arsens, As(III), As(V), des gesamten Antimons und Sb(III) als Spuren in komplexen Gläsern wurden beschrieben. Zwecks Bestimmung des Gesamt-As wird die Probe mit Flußsäure +Schwefelsäure + Permanganat aufgeschlossen. As(V) wird mit Hypophosphit reduziert und die DPV wird an einer Quecksilber-Tropfelektrode zwischen –0,2 und –0,7V gegen eine ges. Kalomelelektrode (E _p =–0,41V) durchgeführt. Zur Bestimmung von As(V) wird die Probe mit HF-H₂SO₄ unter Verflüchtigung des As(III) als AsF₃ aufgeschlossen. Dann erfolgt die Reduktion des As(V) und die DPV. Wenn sich das Glas mit kalter HF lösen läßt, wird anwesendes As(III) mittels DPV in dieser Lösung bestimmt. Zur Bestimmung des Sb(III) wird die Probe mit HF-H₂SO₄ zersetzt, verdünnt und bis zur 1-Molarität mit HCl versetzt. Dann wird mit DPV zwischen –0,03 und –0,5V gemessen (E _p =–0,15V). Sb(V) wird in 1M salzsaurer Lösung nicht reduziert. Das Gesamt-Sb wird in einem Aliquot der Probelösung bestimmt, das dazu mit HCl bis zur 6fachen Molarität versetzt wird. Der DPV-Bereich wird von –0,5 bis –0,1 V ausgenützt (E _p f:ur Sb(V) und Sb(III) ist –0,30 V). Das Verfahren wurde für Gläser verschiedenster Zusammensetzung angewendet. Die Ergebnisse wurden mit den Resultaten der Spektrophotometrie und der coulometrischen Titration verglichen.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.     

Aging of poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene)/toluene solutions and subsequent effects on luminescence behavior of cast films

Morphological effects in luminescence properties of a representative semiconducting polymer, poly(2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV), has recently attracted much attention. Previous studies indicated that short-term heat treatment of solution-cast MEH-PPV films may result in the formation of mesomorphic order that is responsible for the "red" emission around 640 nm, in contrast to the single-chromophore "yellow" emission near 590 nm from the disordered matrix. On the basis of microscopic and spectroscopic evidence for films cast from freshly prepared and aged solutions, here we show that prolonged storage of MEHyellowPPV solutions at room temperature or lower may result in retardation of the thermally induced mesophase formation in the subsequently cast films. According to small-angle neutron scattering and differential scanning calorimetric observations over aged MEH-PPV/toluene solutions, we propose that the suppressed transformation into mesomorphic order is due to further development of nanocrystalline aggregates that serve as physical cross-links among MEH-PPV chains in the solution state upon long-term storage. These solvent-induced nanocrystalline aggregates, however, do not exhibit new spectroscopic features beyond the suppression of "red" emission at 640 nm from the mesomorphic phase.     

Fingerprint quality control of Tianjihuang by high-performance liquid chromatography-photodiode array detection

A novel, simple and accurate fingerprint method was developed using high-performance liquid chromatography-photodiode array detection (HPLC-DAD) for the quality control of Hypericum japonicum thunb (Tianjihuang), a Chinese herbal medicine used for the treatment of several bacterial diseases, infectious hepatitis, gastrointestinal disorder, internal hemorrhage and tumors. For the first time, the feasibility and advantages of employing chromatographic fingerprint were investigated and demonstrated for the evaluation of Tianjihuang by systematically comparing chromatograms with a professional analytical software recommended by State Food and Drug Administration (SFDA). Our results revealed that the chromatographic fingerprint combining similarity evaluation could efficiently identify and distinguish raw herbs of Tianjihuang from different sources. The effects resulted from collecting locations, harvesting time and storage time on herbal chromatographic fingerprints were also examined.     

Ruthenium-based Conjugated Polymer and Metal-organic Framework Nanocomposites for Glucose Sensing

Many studies have focused on effective ways to exploit enzyme immobilization on an electrode surface to help improve the performance of enzymatic electrochemical biosensors. Herein, a novel glucose sensor was fabricated by immobilizing glucose oxidase (GOx) onruthenium-based conjugated polymer (CP) and metal-organic framework (MOF) nanocomposites. This has not only reduced the applied potential to 0.2 V (vs. Ag/AgCl), but also improved the effective surface area for enzyme immobilization.PPG@Ru@UiO-66-NH₂ was tailored by controlled chemical synthesis from a pre-synthesized water-soluble conjugated polymer (poly(N-phenylglycine)) and metal-organic framework (UiO-66-NH₂). The resulting nanocomposites were characterized using Fourier transform infrared spectroscopy, X-ray fluorescence, scanning electron microscopy, and cyclic voltammetry. The PPG@Ru@UiO-66-NH₂/GOx coated electrodedisplayed a linear measurementrange for glucose from 1 mM to 10 mM, with a sensitivity of 45.92 μA ⋅ mM⁻¹cm⁻¹ and limit of detection of5 μM( ). Furthermore, the practical application of the fabricatedglucosesensor was tested in simulative blood samples with satisfactoryaccuracy. This approach alsoopens a new door for applications regarding both enzymatic electrochemical biosensors and enzymatic biofuel cells (EBFCs).     

Rational design of an “all-in-one” phototheranostic

We report here porphodilactol derivatives and their corresponding metal complexes. These systems show promise as “all-in-one” phototheranostics and are predicated on a design strategy that involves controlling the relationship between intersystem crossing (ISC) and photothermal conversion efficiency following photoexcitation. The requisite balance was achieved by tuning the aromaticity of these porphyrinoid derivatives and forming complexes with one of two lanthanide cations, namely Gd³⁺ and Lu³⁺. The net result led to a metalloporphodilactol system, Gd-trans-2, with seemingly optimal ISC efficiency, photothermal conversion efficiency and fluorescence properties, as well as good chemical stability. Encapsulation of Gd-trans-2 within mesoporous silica nanoparticles (MSN) allowed its evaluation for tumour diagnosis and therapy. It was found to be effective as an “all-in-one” phototheranostic that allowed for NIR fluorescence/photoacoustic dual-modal imaging while providing an excellent combined PTT/PDT therapeutic efficacy in vitro and in vivo in 4T1-tumour-bearing mice.

We report here porphodilactol derivatives and their corresponding metal complexes as “all-in-one” phototheranostics by controlling the relationship between intersystem crossing (ISC) and photothermal conversion efficiency following photoexcitation.