Untersuchung von Fetten und ?len.

Ohne Zusammenfassung     

Synthesis and bulk characterization of new P(CB‐b‐S) diblock copolymers

Strongly asymmetric chlorinated polybutadiene‐b‐polystyrene, [P((CB)_x‐b‐(PS)_y)] diblock copolymers with increasing x/(x + y) ratios (up to 5.2 mol %) have been synthesized by the selective chlorination of the polybutadiene (PB) block in solution. Chlorination has been performed in anhydrous dichloromethane added with an antioxidant [2,2′‐methylenebis‐(6‐tert‐butyl‐4‐methyl‐phenol)], at −50°C, under a continuous Ar flow and in the dark. Under the optimized experimental conditions, the PB chlorination is not complete, but the PS block is left unmodified. Even in the presence of a large chlorine excess (Cl₂/butene unit molar ratio of 2.5), the experimental degree of chlorination of homo PB does not exceed 85%. The chlorinated copolymers have been characterized by ¹H‐NMR, IR spectroscopy, size‐exclusion chromatography, and elemental analysis. The chlorinated copolymers have also been studied by DSC and SAXS after annealing at 150°C. Although at this temperature the parent homopolymers are immiscible, no microphase separation has been observed for the block copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 233–244, 1999     

Alkyne coupling at a rhenium-monocarborane substrate: synthesis of Re,B-eta2:sigma-butadienyl complexes

Treatment of 7-NH(2)Bu(t)-nido-7-CB(10)H(12) in tetrahydrofuran (THF) with LiBu(n)(3 equiv) and then [ReBr(CO)(3)(THF)(2)] gives the rhenacarborane dianion [1-NHBu(t)-2,2,2-(CO)(3)-closo-2,1-ReCB(10)H(10)](2-), isolated as the bis-[N(PPh(3))(2)](+) salt (4). Iodine oxidation of this Re(I) intermediate gives the Re(III) complex [1,2-mu-NHBu(t)-2,2,2-(CO)(3)-closo-2,1-ReCB(10)H(10)] 6 in which the carborane functions formally as an 8-electron (6pi+ 2sigma) donor. Reaction of with ligands L in the presence of Me(3)NO gives substituted products [1,2-mu-NHBu(t)-2,2-(CO)(2)-2-L-closo-2,1-ReCB(10)H(10)][L = PPh(3)(7a), CNXyl (7b; Xyl = C(6)H(3)Me(2)-2,6), or Bu(t)C triple bond CH (7c)]. Formation of complex 7c is unexpectedly accompanied by [1,2-mu-NHBu(t)-2,2-(CO)(2)-3,2-sigma:eta(2)-{C(=CHBu(t))-CH=CHBu(t)}-closo-2,1-ReCB(10)H(9)] 8a, in which an alkyne-derived dienyl group is bound to both the rhenium centre and to an adjacent boron vertex. Complex 8a is also obtained from 7c with Bu(t)C triple bond CH and Me(3)NO. The same reaction of 7c, using PhC triple bond CH or CNXyl instead of Bu(t)C triple bond CH, gives, respectively, [1,2-micro-NHBu(t)-2,2-(CO)(2)-3,2-sigma:eta(2)-{C(=CHBu(t))-CH=CHPh}-closo-2,1-ReCB(10)H(9)] 8b and [1,2-micro-NHBu(t)-2-Bu(t)C triple bond CH-2-CO-2-CNXyl-closo-2,1-ReCB(10)H(10)] 9. Addition of donors L to results in displacement from rhenium of the pendant dienyl moiety, yielding [1,2-mu-NHBu(t)-2,2-(CO)(2)-2-L-3-{C(=CHBu(t))-CH=CHBu(t)}-closo-2,1-ReCB(10)H(9)][L = PMe(3)(10a), CNBu(t)(10b)]. Single-crystal X-ray diffraction analyses have confirmed the novel structural features of compounds 6, 7c, 8b and 9.     

Substitution, cage functionalization, and oxidation of the charge-compensated triruthenium monocarbollide cluster complex [1-SMe2-2,2-(CO)2-7,11-(mu-H)2-2,7,11-{Ru2(CO)6}-closo-2,1-RuCB10H8

The compound [1-SMe2-2,2-(CO)2-7,11-(mu-H)2-2,7,11-{Ru2(CO)6}-closo-2,1-RuCB10H8] 1a reacts with PMe3 or PCy3(Cy = cyclo-C6H11) to give the structurally different species [1-SMe2-2,2-(CO)2-7,11-(mu-H)2-2,7,11-{Ru2(CO)5(PMe3)}-closo-2,1-RuCB10H8] 4 and [1-SMe2-2,2-(CO)2-11-(mu-H)-2,7,11-{Ru2(mu-H)(CO)5(PCy3)}-closo-2,1-RuCB10H8]5, respectively. A symmetrically disubstituted product [1-SMe2-2,2-(CO)2-7,11-(mu-H)2-2,7,11-{Ru2(CO)4(PMe3)2}-closo-2,1-RuCB10H8] 6 is obtained using an excess of PMe3. In contrast, the chelating diphosphines 1,1'-(PPh2)2-Fe(eta-C5H4)2 and 1,2-(PPh2)2-closo-1,2-C2B10H10 react with 1a to yield oxidative-insertion species [1-SMe2-2,2-(CO)2-11-(mu-H)-2,7,11-{Ru2(mu-H)(micro-[1',1'-(PPh2)2-Fe(eta-C5H4)2])(CO)4}-closo-2,1-RuCB10H8] 7 and [1-SMe2-2,2-(CO)2-11-(mu-H)-2,7,11-{Ru2(mu-H)(CO)4(1',2'-(PPh2)2-closo-1',2'-C2B10H10)}-closo-2,1-RuCB10H8] 8, respectively. In toluene at reflux temperatures, 1a with Bu(t)SSBu(t) gives [1-SMe2-2,2-(CO)2-7-(mu-SBu(t))-11-(mu-H)-2,7,11-{Ru2(mu-H)(mu-SBu(t))(CO)4}-closo-2,1-RuCB10H8] 9, and with Bu(t)C [triple bond] CH gives [1-SMe2-2,2-(CO)2-7-{mu:eta2-(E)-CH=C(H)Bu(t)}-11-{mu:eta2-(E)-CH=C(H)Bu(t)}-2,7,11-{Ru2(CO)5}-closo-2,1-RuCB10H8] 10. In the latter, two alkyne groups have inserted into cage B-H groups, with one of the resulting B-vinyl moieties involved in a C-H...Ru agostic bond. Oxidation of 1a with I2 or HgCl2 affords the mononuclear ruthenium complex [1-SMe2-2,2,2-(CO)3-closo-2,1-RuCB10H10] 11.     

Hydrogels of poly(hydroxyethyl methacrylate) and hydroxyethyl methacrylate—glycerol monomethacry-late copolymers

Hydrophilic three-dimensional polymer networks (hydrogels) were prepared from hydroxyethyl methacrylate (HEMA) and the copolymer HEMA and glycerol monomethacrylate (GMMA). The equilibrium water content of the hydrogels in water was investigated as a function of the initial dilution of the polymerization mixture, the type of solvent, and the hydrophilicity of the polymer. The initial dilution was found to have a decisive effect on the swelling or deswelling of hydrogels after the completion of the gel formation. With relatively less hydrophilic hydrogels, there is a critical initial dilution to produce the gel which does not swell or deswell in water after the gel formation. This “isovolumic” initial dilution shifts toward a higher dilution as the hydrophilicity of the hydrogels increases; however, when hydrophilicity of the polymer rises above a certain point, gels always swell in water. Permeability of oxygen through hydrogels was also studied.     

Reactions of dimethyldivinylsilane,dimethyldivinyltin and allyltrimethyltin with diethylene (tertiary) phosphine)platinum complexes

The compounds [Pt(C₂H₄)₂(PR₃)] [PR₃ = P-tBu₂Me, P(C₆H₁₁)₃, PPh₃] react dimethyldivinylsilane or dimethyldivinyltin to give chelate complexes [Pt{(CH₂CH)₂MMe₂} (PR₃)] (M = Si or Sn). allyltrimethyltin reacts with various diethylene (tertiary phosphine)platinum compounds with cleavage of the allyl group to afford complexes [Pt(SnMe₃)(η³-C₃H₅)(PR₂)]. The NMR spectra (¹³C, ¹H and ³¹P) of the new compounds have been recorded, and the data are discussed in terms of the structures proposed.     

The distribution of nickel ions among octahedral and tetrahedral sites in NiAl2O4MgAl2O4 solid solutions

The cation distribution in NiAl₂O₄ and in the solid solutions Ni_xMg_1?xAl₂O₄ with x ranging from 0.01 to 0.55 has been studied by X-ray analysis, magnetic susceptibility and reflectance spectroscopy.The relative X-ray intensities of various reflections for each compound were measured and compared with intensities calculated for various models of cation distribution. Lattice parameters, magnetic moments of Ni²⁺, and the position of nickel absorption bands have also been measured. The results show that all specimens have a predominantly octahedral distribution for their nickel ions, and that there is a small change towards a random distribution when the quenching temperature is increased from 1273 to 1673°K.Both X-ray and magnetic results show that the fraction, α, of Ni²⁺ ions on tetrahedral sites varies with nickel content. For samples quenched from 1273°K, NiAl₂O₄ is 78% inverse, but between x = 1.0 and x = 0.25 the value of α decreases from 0.22 towards 0.1. Thus, the fraction of nickel on octahedral sites in the solid solutions is higher than in NiAl₂O₄. The effect is linked with an increase in Dq for the Ni²⁺ ion. Below x = 0.25, there is tentative evidence that α may increase. In nickel-dilute solutions the matrix as a whole is nearly normal, and it is suggested that Madelung energy may then be more effective in counteracting the octahedral stabilization of nickel. The same trend is observed in the specimens quenched from 1673°K.     

Non-covalent calixarene-amino acid complexes formed by MALDI-MS

Non-covalent inclusion complexes formed between amino acids and derivatized calix[6]arenes are observed in MALDI mass spectrometry. The methyl, ethyl, and propyl ester derivatives of calix[6]arene yielded amino acid complexes, while the smaller calix[4]arene analogs did not. Similarly the underivatized calix[6]arene and calix[4]arene did not produce complexes. Amino acid complexes were observed for nearly all 20 amino acids in time-of-flight (TOF) analysis. In Fourier transform mass spectrometry (FTMS) analysis, however, only the most basic amino acids arginine, histidine, and lysine formed stable adducts. The complexes were abundant under matrix-assisted laser desorption ionization (MALDI) conditions, which suggested favorable interactions between host and guest.     

Engineered protein cages for nanomaterial synthesis

Self-assembled particles of genetically engineered human L subunit ferritin expressing a silver-binding peptide were used as nanocontainers for the synthesis of silver nanoparticles. The inner cavity of the self-assembled protein cage displays a dodecapeptide that is capable of reducing silver ions to metallic silver. This chimeric protein cage when incubated in the presence of silver nitrate exhibits the growth of a silver nanocrystal within its cavity. Our studies indicate that it is possible to design chimeric cages, using specific peptide templates, for the growth of other inorganic nanoparticles.