Correlation of modified crack tip opening distance with heat input to the heat affected zone of high-strength low-alloy steels

Investigated is the dependency of the crack tip opening displacement (CTOD) on the local microstructure of the heat affected zone in high-strength low-alloy (HSLA) microalloyed steel. Since the initiation of the crack tip location could not be controlled in fatigue, any possible correlation between heat iput in welding and fracture toughness could be smeared. Modified CTOD data are defined; they show that the fracture resistance of the weld joint decreased as the heat input increased.     

Effect of phonon scattering from neutral and charged impurity centers on the lattice heat conductivity of PbTe:(Tl, Na)

Experimental data on the effect of thallium and sodium impurities on the lattice heat conductivity of PbTe at room temperature are reported. Because the lattice of lead chalcogenides is strongly polarized near charged impurities, the effect of impurities on the lattice heat conductivity depends substantially on their charge state. This property of the material has been used to determine the charge state of the thallium impurity in PbTe. The results obtained argue for a model of quasi-local thallium-impurity states which assumes low electron-correlation energy at an impurity center. Fiz. Tverd. Tela (St. Petersburg) 40, 1206–1208 (July 1998)     

Loss and non-linearity saturation effects on the bistability of non-linear distributed feedback structures

We investigate theoretically the effects of optical absorption and saturation of the non-linear index of refraction on the bistability of non-linear distributed feedback structures (NLDFBs). By assuming that the Kerr non-linearity saturates in an exponential fashion, we obtain for the first time closed-form expressions for the so-called self-phase and cross-phase modulation terms. Our investigation shows that both absorption and, in particular, saturation significantly affect the bistable properties of this structure and in many cases eliminate this response completely. In some cases, however, saturation alters the NLDFB's transfer characteristics in a potentially useful manner. We find that weak levels of saturation may increase the contrast ratio between the intensities of the high and low bistable states. At increasing levels of saturation, where bistability is no longer observed, we find regimes where the NLDFB structure could possibly be used for optical amplification. This revised version was published online in November 2006 with corrections to the Cover Date.     

Singularities in cascade models of the Euler equation

The formation of singularities in the three-dimensional Euler equation is investigated. This is done by restricting the number of Fourier modes to a set which allows only for local interactions in wave number space. Starting from an initial large-scale energy distribution, the energy rushes towards smaller scales, forming a universal front independent of initial conditions. The front results in a singularity of the vorticity in finite time, and has scaling form as function of the time difference from the singularity. Using a simplified model, we compute the values of the exponents and the shape of the front analytically. The results are in good agreement with numerical simulations.     

FEM study of palladium and molybdenum clusters on an alumina covered field emitter

Palladium and molybdenum polycrystalline layers (clusters) have been deposited in a stainless steel UHV system onto a layer of alumina (Al₂O₃). This layer has been prepared by high temperature oxidation of an aluminium layer. The interaction of this system with nitrogen has been investigated at room temperature by an FEM technique. Under these conditions nitrogen spillover from molybdenum to palladium has been observed.     

Hydroxyl ion conduction in ytterbium-doped strontium cerate at T<580 K in H2O/air atmosphere

Open circuit voltage (OCV) measurements in H₂O/air concentration cells at T<580 K using Yb-doped SrCeO₃ electrolyte indicate that under these conditions, protons are transported through the electrolyte as -ve ions, possibly as hydroxyl (OH⁻) ions. The H⁺ ionic transport, which is generally reported, becomes the dominant mode for H₂O/air concentration cells at temperatures greater than 750 K or when H₂O/air electrodes are replaced by H₂/Ar, and the anomalous OCV sign disappears. The combination of low temperature and the presence of hydrogen and oxygen as provided by the H₂O/air system appears to be necessary for the postulated hydroxyl ion electrode reactions to take place. In addition to OCV measurements, results from impedance spectroscopy are used to provide evidence in support of the suggested hydroxyl ion mode of protonic transport under the specified conditions. These findings are directly relevant in the development of novel humidity sensors in the temperature range 450–580K and is reported in a separate paper in this conference. Paper presented at the 3rd Euroconference on Solid State Ionics, Teulada, Sardinia, Italy, Sept. 15–22, 1996     

Investigation of the chemical state of copper in Cu/SiO2 composite films by x-ray photoelectron spectroscopy

The concentration and chemical state of copper in the subsurface region of Cu/SiO₂ composite films obtained by simultaneous magnetron sputtering from two sources (Cu and SiO₂) are determined by x-ray photoelectron spectroscopy (XPS). It is established that copper in the as-grown film is primarily in the form of unoxidized atoms dispersed in a SiO₂ matrix. Annealing of the film results in practically no oxidation, but about 70% of the copper atoms condense into metallic clusters with sizes below 10 Å in the subsurface region and about 50 Å in the bulk of the film. The changes in the binding energy of core electrons, and especially in the energies of Auger electrons, are so large in this situation that photoelectron and Auger spectroscopy are efficient methods for monitoring the chemical state of this composite material.     

Student-Invented Numeration Systems: Pattern-Analysis and Mathematical Understanding

Thirteen fifth graders were given an assignment to invent their own numeration systems, following a unit on bases and a look at early events in the history of numbers. The task presented options that required the students to make decisions (such as whether to use a base, which base to use, design of symbols, etc.), and build a rationale for the elements of their system. Analyses of patterns embedded in their invented systems provided an assessment of student understanding of numeration. The progression of more and less complex thinking related to the student's choice of a base other than 10, consistency of logic throughout the system in words and symbols, rationale for change, and perception of real life examples that would change if the system was adopted. The invention task is presented as another way to make connections.