Chromium(III) Hydroxide Solubility in the Aqueous K+-H+-OH?-CO2-HCO 3? -CO 32? -H2O System: A?Thermodynamic Model

Chromium(III)-carbonate reactions are expected to be important in managing high-level radioactive wastes. Extensive studies on the solubility of amorphous Cr(III) hydroxide solid in a wide range of pH (3–13) at two different fixed partial pressures of CO₂(g) (0.003 or 0.03 atm.), and as functions of K₂CO₃ concentrations (0.01 to 5.8 mol⋅kg⁻¹) in the presence of 0.01 mol⋅dm⁻³ KOH and KHCO₃ concentrations (0.001 to 0.826 mol⋅kg⁻¹) at room temperature (22±2 °C) were carried out to obtain reliable thermodynamic data for important Cr(III)-carbonate reactions. A combination of techniques (XRD, XANES, EXAFS, UV-Vis-NIR spectroscopy, thermodynamic analyses of solubility data, and quantum mechanical calculations) was used to characterize the solid and aqueous species. The Pitzer ion-interaction approach was used to interpret the solubility data. Only two aqueous species [Cr(OH)(CO₃)₂²⁻ and Cr(OH)₄CO₃³⁻] are required to explain Cr(III)-carbonate reactions in a wide range of pH, CO₂(g) partial pressures, and bicarbonate and carbonate concentrations. Calculations based on density functional theory support the existence of these species. The log ₁₀ K° values of reactions involving these species [{Cr(OH)₃(am) + 2CO₂(g)⇌Cr(OH)(CO₃)₂²⁻+2H⁺} and {Cr(OH)₃(am) + OH⁻+CO₃²⁻ ⇌Cr(OH)₄CO₃³⁻}] were found to be −(19.07±0.41) and −(4.19±0.19), respectively. No other data on any Cr(III)-carbonato complexes are available for comparisons.     

Complete ozonolysis of alkyl substituted ethenes at -60 degrees C: distributions of ozonide and oligomeric products

The distribution of ozonide and oligomeric structures formed on complete ozonolysis of alkenes in a non-participating solvent at -60 degrees C is governed by the alkyl substitution around the carbon-carbon double bond. The ozonolysis of a 1,1-alkyl substituted ethene generally favours the formation of an ozonide (a 1,2,4-trioxolane). Whereas the ozonolysis of a 1,1,2-alkyl substituted ethene also produces ozonide, a considerable amount of the ozonised products are oligomeric in nature. For example, the ozonolysis of 3-methylpent-2-ene in solution to high conversion in pentane yields oligomers with structural units derived from the fragmentation products of the primary ozonide (a 1,2,3-trioxolane) which are namely butanone carbonyl oxide and acetaldehyde; these can be characterised by electrospray ionisation mass spectroscopy (ESI-MS) under soft ionisation conditions. The predominant oligomers formed are rich in carbonyl oxide units (80 + mol%) and are cyclic in nature. A small proportion of the oligomers formed are open chain compounds with end groups that suggest that chain termination is brought about either by water or by hydrogen peroxide. Residual water in the solvent will react with the carbonyl oxides to produce 2-methoxybut-2-yl hydroperoxide, which we propose readily decomposes generating hydrogen peroxide. A significant yield of oligomers also is obtained from the ozonolysis of a 1,2-alkyl substituted ethene. The ozonolysis of trans-hex-2-ene in pentane yields oligomers containing up to four structural units and are predicted to be mainly cyclic.     

The influence of activated carbon on the thermal decomposition of sodium ethyl xanthate

The thermal decomposition of SEX in a nitrogen atmosphere was studied by coupled thermogravimetry-Fourier transform infrared spectroscopy (TG-FTIR), and by pyrolysis-gas chromatography-mass spectrometry (py-GC-MS). The TG curve exhibited two discrete mass losses of 45.8% and 17.8% respectively, at 200 and 257–364°C. The evolved gases identified as a result of the first mass loss were carbonyl sulfide (COS), ethanol (C₂H₅OH), ethanethiol (C₂H₅SH), carbon disulfide (CS₂), diethyl sulfide ((C₂H₅)₂S), diethyl carbonate ((C₂H₅O)₂CO), diethyl disulfide ((C₂H₅)₂S₂), and carbonothioic acid, O, S, diethyl ester ((C₂H₅S)(C₂H₅O)CO). The gases identified as a result of the second mass loss were carbonyl sulfide, ethanethiol, and carbon disulfide. Hydrogen sulfide was detected in both mass losses by py-GC-MS, but not detected by FTIR. The solid residue was sodium hydrogen sulfide (NaSH).SEX was adsorbed onto activated carbon, and heated in nitrogen. Two discrete mass losses were still observed, but in the temperature ranges 100–186°C (7.8%) and 186–279°C (11.8%). Carbonyl sulfide and carbon disulfide were now the dominant gases evolved in each of the mass losses, and the other gaseous products were relatively minor. It was demonstrated that water adsorbed on the carbon hydrolysed the xanthate to cause the first mass loss, and any unhydrolysed material decomposed to give the second mass loss.Mr. N. G. Fisher would like to thank the A. J. Parker CRC for Hydrometallurgy for the provision of a PhD scholarship.     

Intermolecular coupling of alkenes to heterocycles via C-H bond activation

The intermolecular coupling of unactivated alkenes to a range of heterocycles using a Rh(I) catalyst was investigated. A variety of functional groups were incorporated into the alkene, including esters, nitriles, acetals, and phthalimide. Furthermore, the heterocycle tolerated substitution with both electron-rich and electron-deficient groups. The intermolecular coupling became possible after it was discovered that weak acids dramatically increase the rate of both the inter- and intramolecular reactions. An extensive optimization of additives was performed, and HCl.PCy(3) (Cy = cyclohexyl) and HCl.P-t-Bu(2)Et were in general found to be the best additives for the reaction.     

Energetics of proton transfer between carbon atoms (H3CH ? CH3)−

Ab initio calculations were carried out to study the potential energy surface of (H₃C? H? CH₃)^?. The 6–31G* basis set is supplemented by a set of diffuse p functions on both C and H (with a range of exponents for the latter). The binding energy of CH₄ and CH₃^? to form the (H₃CH? CH₃)^? complex is about 2 kcal/mol, much smaller than for comparable ionic H-bonded systems involving O or N atoms. Nearly half of this interaction energy is due to correlation effects, computed at second and third orders of Møller-Plesset perturbation theory. Correlation is also responsible for substantial reductions in the energy barrier to proton transfer within the complex. This barrier is computed to be 13?15 kcal/mol at the MP3 level, depending upon the exponent used for the H p functions.     

The lanthanideβ″ aluminas

The entire sodium ion content of sodium alumina (Na_1.67Mg_0.67Al_10.33O₁₇) can be replaced with a variety of lanthanide ions by simple diffusion reactions at moderate temperatures (500–700°C). Lanthanide alumina crystals are hard, clear, chemically stable, and have well-defined crystal structures. The fluorescence spectrum of Nd³⁺ in alumina is similar to that in YAG. The lifetime of the⁴ F _3/2 state of Nd³⁺ in completely-exchanged alumina (350s at 10²¹ Nd³⁺ cm^–3) is about 45% longer than in YAG (240s at 10²⁰Nd³⁺ cm^–3). The lanthanide aluminas may be of considerable interest as new phosphor and laser host materials.     

Synthesis and stereochemical assignment of 7-arylidene and 7-heteroarylidene morphinan-6-ones

A number of (E)-7-arylidenenaltrexones were synthesized by azeotropic distillation of water from a benzene solution of naltrexone and an aromatic aldehyde (benzaldehyde, 4-chloro- and 4-fluorobenzaldehyde, 3-and 4-pyridinecarboxaldehyde and 1-methyl-2-imidazolecarboxaldehyde) using piperidine as a catalyst. In addition, (E)-7-benzylidenenaloxone was prepared by the previously published Claisen-Schmidt condensation using sodium hydroxide in methanol. The stereochemistry of these arylidene derivatives 3–9 was determined to be (E) by means of nuclear Overhauser enhancement experiments. The ¹³C nmr spectra of (E)- 3–9 are recorded in deuteriochloroform and those of the hydrochlorides in deuteriodimethyl sulfoxide.     

Synthesis of phenylated phthalimides. The diels-alder reaction of tetraphenylcyclopentadienone with maleimides

A series of phenylated dihydrophthalimides has been synthesized by the Diels-Alder reaction of tetraphenylcyclopentadienone with maleimide, N-phenylmaleimide, and N,N'-o-, -m-, and -p-phenylenedimaleimide. Subsequent dehydrogenation of these compounds yielded the corresponding phenylated phthalimides. These phthalimides were also obtained in one step when the initial reactions were carried out in refluxing nitrobenzene.     

Measuring the metabolome: current analytical technologies

The post-genomics era has brought with it ever increasing demands to observe and characterise variation within biological systems. This variation has been studied at the genomic (gene function), proteomic (protein regulation) and the metabolomic (small molecular weight metabolite) levels. Whilst genomics and proteomics are generally studied using microarrays (genomics) and 2D-gels or mass spectrometry (proteomics), the technique of choice is less obvious in the area of metabolomics. Much work has been published employing mass spectrometry, NMR spectroscopy and vibrational spectroscopic techniques, amongst others, for the study of variations within the metabolome in many animal, plant and microbial systems. This review discusses the advantages and disadvantages of each technique, putting the current status of the field of metabolomics in context, and providing examples of applications for each technique employed.