Relaxation and thermal vibrations at the NaF(100) surface

The relaxation and the thermal vibrations of the NaF(100) surface are investigated in the temperature range between 25 K and 230 K by means of low-energy electron diffraction (LEED) and a subsequent I(V) structure analysis based on the tensor LEED approach (TLEED). According to the experiments, the NaF(100) surface is not significantly relaxed and has the ideal truncated bulk structure. The thermal vibrational amplitudes of the ions in the topmost layer are significantly enhanced compared to the bulk by a factor of 1.35 ± 0.15 and are equal within the error-bars for Na⁺ and F^? ions. Moreover, the relaxation and the dynamics of the NaF(100) surface are investigated using periodic density functional theory (DFT) calculations using pseudopotentials. In agreement with the experimental findings, the calculated relaxation of the NaF(100) surface is weak with static shifts of the ions of 0.01 Å to 0.02 Å. In the topmost layer, the Na⁺ ions are predicted to be slightly inward shifted, whereas the F^? ions are outward shifted, in accordance to predictions of previous shell-model calculations. A Born Oppenheimer molecular dynamics (BO-MD) simulation of the dynamics at the NaF(100) surface leads to a smaller enhancement of thermal motions of the ions at the surface compared to the experiment.     

NO2 sensing properties of YSZ-based sensor using NiO and Cr-doped NiO sensing electrodes at high temperature

Nickel oxide and chromium-doped nickel oxide (Ni_0.95Cr_0.03O_1−δ ) were prepared by thermal decomposition of nitrates. The obtained NiO and Ni_0.95Cr_0.03O_1−δ samples were utilized as sensing electrodes (SEs) in yttria-stabilized zirconia (YSZ)-based sensors for detection of NO₂ at 800 °C under wet condition (5 vol.% H₂O). While the mixed-potential-type planar sensor attached with NiO-SE gave rather large NO₂ sensitivity, the sensor attached with Ni_0.95Cr_0.03O_1−δ -SE exhibited fast recovery rate with an acceptable sensitivity. The Δemf (electromotive force) of the sensors varied linearly with NO₂ concentration in the examined range of 50–400 ppm on a logarithmic scale. Based on the results of measurements for polarization, complex impedance and gas phase catalysis, the fast recovery was attributable to the high rate for the anodic reaction of O₂ at the Ni_0.95Cr_0.03O_1−δ /YSZ interface, and the lower NO₂ sensitivity was caused by both the high rate for the anodic reaction of O₂ and the high degree for the gas phase conversion of NO₂ to NO.     

Complex formation between a nanoparticle and a weak polyelectrolyte chain: Monte Carlo simulations

Understanding the complexation processes between nanoparticles and polyelectrolytes is an essential aspect in many branches of nanotechnology, nanoscience, chemistry, and biology to describe processes such as nanoparticle stabilization/destabilization and dispersion, water treatment, microencapsulation, complexation with biomolecules for example, and evolution of the interface of many natural and synthetic systems. In view of the complexity of such processes, applications are often based on empirical or semiempirical observations rather than on predictions based on theoretical or analytical models. In this study, the complex formation between an isolated weak polyelectrolyte and an oppositely charged nanoparticle is investigated using Monte Carlo simulations with screened Coulomb potentials in the grand canonical ensemble. The roles of the nanoparticle surface charge density , solution pH and ionic concentration C_i are systematically investigated. The phase diagrams of complex conformations are also presented. It is shown that the polyelectrolyte conformation at the surface of the nanoparticle is controlled by the attractive interactions with the nanoparticle but also by the repulsive interactions between the monomers. To bridge the gap with experiments titration curves are calculated. We clearly demonstrate that an oppositely charged nanoparticle can significantly modify the acid/base properties of a weak polyelectrolyte.     

Detecting exposure-dependent changes of liver detoxification capacity of children in a formerly high-loaded industrial area with a 15N-labelled diagnostic tool

The effect of remediation activities in formerly high-loaded industrial areas is measured conventionally in terms of decreased toxic loads. It is more difficult to investigate the effect on physiological parameters of the people living there. A non-invasive 15N-based organ function test, the [15N]methacetin urine test, was adapted to environmental-medical purposes for the detection of small deviations from the norm-range hepatic detoxification capacity. Parallel to the measurement of region-specific external exposure (especially by tri- and tetrachloro ethylene) and of the corresponding internal load (urinary trichloro acetic acid), the hepatic mono oxygenation capacity was determined. The study cohort consisted of 35 kindergarten children who were 3.3+/-0.5 years old at the beginning of the study. They lived in a high-polluted industrial village (n = 23) and in a non-polluted control village close by (n = 12), respectively. Children living in the polluted area were exposed a 2.3 times higher load and showed detoxification capacities 6% lower than the children in the control area. Improvement of the environmental situation led to exposure data decreasing by 70%, which is also reflected in smaller internal load and improved liver detoxification of the children in the polluted area. Then, between loaded and control area the mean hepatic detoxification was no longer significantly different (0.6%). The study shows that chronic low-dose exposure can disturb a hepatic function and that thereafter the capacity is recovered quickly in children. The stable isotope-based test is suited to characterize a health effect of multicomponent exposure by bioeffect monitoring within the framework of screening and testing the remediation efficiency.     

Real-Time Detection of Polymerase Activity Using Supercritical Angle Fluorescence

We investigated the incorporation efficiencies of different fluorescently labelled dNTPs with polymerases by complementary strand synthesis. For this reason single stranded DNA was immobilized on a coverslip and the increase of fluorescence due to the synthesis of the corresponding strand with tagged dNTPs was detected with a supercritical angle fluorescence biosensor in real-time. By comparison of the observed signal intensities it was possible to conclude that the system Cy5-dCTP-Klenow (exonuclease free) fragment gives the best incorporation yield of the investigated enzymes and dNTPs.     

Isotopic production cross sections of residues in reactions induced by relativistic heavy ions with protons and deuterons

The isotopic production cross sections of heavy residues in relativistic heavy-ion collisions have been investigated in inverse kinematics. The primary reaction products were fully identified in mass and atomic number prior to beta decay using the fragment separator FRS. The huge collection of data obtained helps in the understanding of the two main reaction mechanisms involved: fragmentation and fission. These data provide basic information for future radioactive ion beam facilities and for technical applications like intense neutron sources by means of spallation targets.     

Interaction dynamics of elastic waves with a complex nonlinear scatterer through the use of a time reversal mirror

This Letter reports on work performed to locate and interrogate a nonlinear scatterer in a linearly elastic medium through the use of a time reversal mirror in combination with nonlinear dynamics. Time reversal provides the means to spatially and temporally localize elastic energy on a scattering feature while the nonlinear dynamics spectrum allows one to determine whether the scatterer is nonlinear (e.g., mechanical damage). Here elastic waves are measured in a solid and processed to extract the nonlinear elastic response. The processed elastic signals are then time reversed, rebroadcast, and found to focus on the nonlinear scatterer, thus defining a time-reversed nonlinear elastic wave spectroscopy process. Additionally, the focusing process illuminates the complexity of the nonlinear scatterer in both space and time, providing a means to image and investigate the origins and physical mechanisms of the nonlinear elastic response.     

TiO2 thick films supported on reticulated macroporous Al2O3 foams and their photoactivity in phenol mineralization

TiO₂ thick films deposited on macroporous reticulated Al₂O₃ foams with pore size of 10 ppi and 15 ppi were prepared using dip coating from slurries of Aeroxide^® P25 nanopowder and precipitated titania. All prepared films have sufficiently good adhesion to the surface of the substrate also in case of strongly cracked films. No measurable release of deposited TiO₂ after repeated photocatalytic cycles was observed. The photocatalytic activity was characterized as the rate of mineralization of aqueous phenol solution under irradiation of UVA light by TOC technique. The best activity was obtained with Aeroxide^® P25 coated Al₂O₃ foam with the pore size of 10 ppi, annealed at 600 °C. The optimal annealing temperature for preparation of films from precipitated titania could be determined at 700 °C. Films prepared by sol-gel deposition technique were considerably thinner compared to coatings made of suspensions and their photocatalytic activity was significantly smaller.     

The materials science X‐ray beamline BL8 at the DELTA storage ring

The hard X‐ray beamline BL8 at the superconducting asymmetric wiggler at the 1.5 GeV Dortmund Electron Accelerator DELTA is described. This beamline is dedicated to X‐ray studies in the spectral range from ～1 keV to ～25 keV photon energy. The monochromator as well as the other optical components of the beamline are optimized accordingly. The endstation comprises a six‐axis diffractometer that is capable of carrying heavy loads related to non‐ambient sample environments such as, for example, ultrahigh‐vacuum systems, high‐pressure cells or liquid‐helium cryostats. X‐ray absorption spectra from several reference compounds illustrate the performance. Besides transmission measurements, fluorescence detection for dilute sample systems as well as surface‐sensitive reflection‐mode experiments have been performed. The results show that high‐quality EXAFS data can be obtained in the quick‐scanning EXAFS mode within a few seconds of acquisition time, enabling time‐resolved in situ experiments using standard beamline equipment that is permanently available. The performance of the new beamline, especially in terms of the photon flux and energy resolution, is competitive with other insertion‐device beamlines worldwide, and several sophisticated experiments including surface‐sensitive EXAFS experiments are feasible.