Studies on azaspiracid biotoxins. I. Ultrafast high-resolution liquid chromatography/mass spectrometry separations using monolithic columns

In this study, the performance of monolithic columns was evaluated for ultrafast liquid chromatography/mass spectrometry (LC/MS) analyses and for high-resolution separations of several azaspiracid biotoxin analogs. Because of their high permeability, monolithic columns offer a number of advantages over conventional packed columns; viz., very low backpressures and relatively flat van Deemter curves at high flow rates. That is, very high flow rates can be used for ultrafast analyses or, by using longer than normal columns, high-resolution separations are possible. In a series of experiments, we varied the mobile phase flow rates between 1 and 8 mL/min, and studied their impact on chromatographic parameters such as retention time, resolution, number of plates and pressure. The chromatographic run times could be reduced to ca. 30 s without a significant change in the separation efficiency. A signal intensity comparison revealed interesting differences between atmospheric-pressure chemical ionization (APCI) and electrospray ionization (ESI) in their flow-rate dependency. An explanation with respect to the behavior as of a mass-flow or a concentration-dependent device is given in the paper. Additionally, the column length was varied between 10 and 70 cm. As a result, the number of theoretical plates increased substantially. In the example shown in the report, an increase from 13 000 plates for a 10-cm column to 80 000 for a 70-cm column is demonstrated. In addition, the potential of the monolithic columns for high-resolution LC/MS separations is shown for a complex biotoxin mixture, which was separated on a 40-cm-long column.     

Bimetallic complexes from amphoteric group 13/15 ligands: syntheses and X-ray crystal structures

Bimetallic, pentel-bridged complexes of the type [(dmap)Me2M-E(SiMe3)2-M'(CO)n] (M=Al, Ga; E=P, As, Sb; M'=Cr, Fe, Ni; DMAP=4-(dimethylamino)pyridine) are formed by reactions of DMAP-coordinated monomeric Group 13/15 compounds [(dmap)Me2M-E(SiMe3)2] with the transition metal complexes [(Me3N)Cr(CO)5], [Fe3(CO)12], and [Ni(CO)4]. For the first time, this reaction offers a general pathway to compounds containing a Group 13 metal and a transition metal bridged by a pentel atom. Complexes prepared in this way were characterized by IR and multinuclear NMR spectroscopy and by single-crystal X-ray structure analysis. Their electronic and structural properties are discussed in detail. The Group 13/15 ligands are very weak acceptors, which is likely to be due to the electropositive Group 13 metal, and the complexes feature comparatively long pentel-transition metal bonds. In addition, the synthesis and structural characterization of the parent DMAP-coordinated gallanes [(dmap)Me2Ga-E(SiMe3)2] (E=P, As) are reported.     

Determination of carbonyl compounds in exhaust gas by using a modified DNPH-method

The determination of carbonyl compounds in gaseous samples is usually accomplished by enrichment methods, in which 2,4-dinitrophenyl-hydrazine (DNPH) as a derivatization reagent has become established to a large extent. However, the conventional methods of DNPH-impingers and of DNPH-cartridges are applicable to emission measurements in a limited way only, depending on the NO₂-concentration in the exhaust gas. It could be proved that DNPH-derivatives, as well as DNPH, are also decomposed by NO₂ at a different speed, in which the hydrazones of unsaturated carbonyl compounds are probably more sensitive than those of the saturated carbonyl compounds. In view of this fact, the collecting methods had to be modified to avoid losses with the enrichment. The analysis of the compounds is carried out by HPLC with an effective gradient-system which is able to separate and detect the carbonyl compounds in exhaust gas within 16 min. Furthermore, a simple working-up procedure is presented which facilitates a parallel analysis by GC.     

Synthesis of "Porphyrin-linker-Thiol" molecules with diverse linkers for studies of molecular-based information storage

The attachment of redox-active molecules such as porphyrins to an electroactive surface provides an attractive approach for electrically addressable molecular-based information storage. Porphyrins are readily attached to a gold surface via thiol linkers. The rate of electron transfer between the electroactive surface and the porphyrin is one of the key factors that dictates suitability for molecular-based memory storage. This rate depends on the type and length of the linker connecting the thiol unit to the porphyrin. We have developed different routes for the preparation of thiol-derivatized porphyrins with eight different linkers. Two sets of linkers explore the effects of linker length and conjugation, with one set comprising phenylethyne units and one set comprising alkyl units. One electron-deficient linker has four fluorine atoms attached directly to a thiophenyl unit. To facilitate the synthesis of the porphyrins, convenient routes have been developed to a wide range of aldehydes possessing a protected S-acetylthio group. An efficient synthesis of 1-(S-acetylthio)-4-iodobenzene also has been developed. A set of porphyrins, each bearing one S-acetyl-derivatized linker at one meso position and mesityl moieties at the three remaining meso positions, has been synthesized. Altogether seven new aldehydes, eight free base porphyrins and eight zinc porphyrins have been prepared. The zinc porphyrins bearing the different linkers all form self-assembled monolayers (SAMs) on gold via in situ cleavage of the S-acetyl protecting group. The SAM of each porphyrin is electrochemically robust and exhibits two reversible oxidation waves.     

Nickel-Catalyzed Preparations of Functionalized Organozincs

The reaction of primary alkyl bromides or chlorides with diethylzinc in the presence of Ni(acac)(2) (5 mol %) furnishes the corresponding alkylzinc halides (X = Br, Cl) via a halogen-zinc exchange reaction. The treatment of terminal alkenes with diethylzinc (neat, 25-60 degrees C) in the presence of Ni(acac)(2) as a catalyst (1-5 mol %) and 1,5-cyclooctadiene (COD) affords the corresponding dialkylzincs via a hydrozincation reaction. Whereas the conversion for simple alkenes bearing a remote functionality reaches 40 to 63%, the hydrozincation of allylic, homoallylic alcohols and allylic amines proceeds very efficiently (85-95% conversion). All the zinc organometallics obtained react with various electrophiles (allylic halides, enones, acid chlorides, alkynyl halides, ethyl propiolate) after transmetalation with CuCN.2LiCl. In the presence of the chiral catalyst 12, the dialkylzincs prepared add to aldehydes with high enantioselectivity.     

Sequence-defined positioning of amine and amide residues to control catechol driven wet adhesion

Catechol and amine residues, both abundantly present in mussel adhesion proteins, are known to act cooperatively by displacing hydration barriers before binding to mineral surfaces. In spite of synthetic efforts toward mussel-inspired adhesives, the effect of positioning of the involved functional groups along a polymer chain is not well understood. By using sequence-defined oligomers grafted to soft hydrogel particles as adhesion probes, we study the effect of catechol–amine spacing, as well as positioning relative to the oligomer terminus. We demonstrate that the catechol–amine spacing has a significant effect on adhesion, while shifting their position has a small effect. Notably, combinations of non-charged amides and catechols can achieve similar cooperative effects on adhesion when compared to amine and catechol residues. Thus, these findings provide a blueprint for the design of next generation mussel-inspired adhesives.

The catechol driven adhesion of precision macromolecules on glass surfaces is quantified by soft colloidal probe readout. Catechol moieties are shown to synergize with amine and amide residues depending on residue spacing and residue order.     

Synthesis and auration of primary and di-primary heteroaryl-phosphines

Convenient high-yield syntheses of the primary and di-primary heteroaryl-phosphines R-PH2 and H2P-R'-PH2(with R = 2-thienyl, 2-furyl, and R'= 2,5-thiophenediyl, 2,5-furandiyl, respectively) are presented. The products and a set of precursor molecules have been characterized by analytical and spectral data, and the crystal structures of selected molecules have been determined: 2-C4H3O-PCl2, 2,5-(Cl2P)2C4H2O, 2,5-[(Et2N)2P]2C4H2E (with E = O, S). In the crystals, the two molecules with -PCl2 substituents adopt trans conformations, while the other two have the -P(NEt2)2 groups rotated into a twist conformation. The reaction of the thienyl compounds with tris[(tert-phosphine)gold]oxonium tetrafluoroborates gave almost quantitative yields of the tri- and hexanuclear gold complexes, respectively: {2-C4H3S-P[Au(PR3)]3}+BF4- and [2,5-{[(R3P)Au]3P}2C4H2S]2+(BF4(-)2, (R =tBu, Ph). The structures of the compounds with R3P =tBu3P ligands have been determined. In both cases the [2-C4H3/2S-P] units cap triangles of gold atoms in an array that can be described as three [Au(PR3)]+ cations bridged by a phosphido dianion (RP)2-.