Characterization of cocoa butters and other vegetable fats by pyrolysis-mass spectrometry

Pyrolysis Mass Spectrometry (Py-MS) was used for the discrimination of cocoa butters from other vegetable fats. Mass spectra ranging from 50 amu to 250 amu were analyzed by principal component analysis (PCA) and with neural nets. The application of neural nets leads to a good discrimination between the two classes. Detailed analysis of the nets revealed that only the first 60 masses were used within the net. The use of PCA requires a careful selection of the number of masses included in the calculation. Canonical variance analysis was applied to determine the significant masses. Optimal performance of PCA was observed only using the first 22 significant masses. Most of these masses were different from the ones used by the neural net. It seems that the mass spectra obtained by Py-MS contain sufficient information for the discrimination of pure cocoa butter from other vegetable fats, but none of the methods seems to be able to extract all information available. Neural net provides a very robust method for this task and no prior data selection was necessary. Received: 13 May 1996 / Revised: 7 August 1996 / Accepted: 7 August 1996     

Covalent attachment of a nickel nitrilotriacetic acid group to a germanium attenuated total reflectance element

The surface of a germanium internal reflectance element (IRE) was modified to bind 6X-histidine (his)-tagged biomolecules. The step-by-step surface modification was monitored via single-pass attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FT-IR). Initially an adlayer of 7-octenyltrimethoxysilane (7-OTMS) was formed on the Ge crystal through the surface hydroxyl groups, which were produced via ozonolysis of the Ge surface. The vinyl moiety of 7-OTMS was oxidized to a carboxylic acid, which was activated by 1,1'-carbonydiimidazole (CDI) to produce a labile imidazole. The labile imidazole that resulted from the CDI coupling was then displaced by the primary amine of nitrilotriacetic acid (NTA). Nickel sulfate was added to the system, and it coordinated with the three carbonyl groups and the nitrogen on NTA, thus leaving the ability of Ni to coordinate with two adjacent histidine residues. Binding of his-tagged biotin to nickel nitrilotriacetic acid (Ni-NTA) was observed by ATR-FT-IR spectroscopy. The surface modification method presented in this paper had minimal nonspecific binding, the Ni-NTA surface was reusable if stored properly, and complete removal of the organic surface was achievable.     

Chemical studies on antioxidant mechanisms and free radical scavenging properties of lignans

The antioxidant activity, in terms of radical scavenging capacity, of altogether 15 different lignans was measured by monitoring the scavenging of the free radical 2,2-diphenyl-1-picrylhydrazyl (DPPH). The effect of differences in skeletal arrangement or the degree of oxidation of the lignans was investigated in a structure-activity relationship study. A large variety in the radical scavenging capacities of the different lignans was observed and related to some structural features. Lignans with catechol (3,4-dihydroxyphenyl) moieties exhibited the highest radical scavenging capacity, while the corresponding guaiacyl (3-methoxy-4-hydroxyphenyl) lignans showed a slightly weaker scavenging capacity. In addition, the butanediol structure was found to enhance the activity, whereas a higher degree of oxidation at the benzylic positions decreased the activity. Additionally, the readily available lignans (-)-secoisolariciresinol, a mixture of hydroxymatairesinol epimers and (-)-matairesinol were studied in more detail, including kinetic measurements and identification of oxidation products in the reactions with DPPH and ABAP (2,2-azobis(2-methylpropionamidine) dihydrochloride. The identification of reaction products, by GC-MS, HPLC-MS and NMR spectroscopy, showed that dimerisation of the two aromatic moieties was the major radical termination reaction. Also, the formation of adducts was a predominant reaction in the experiments with ABAP. The kinetic data obtained from the reactions between the lignans and DPPH indicated a complex reaction mechanism.     

Synthesis of Aristotelia-Type Alkaloids. Part III. (3R,4R)- and (3R,4S)-1-p-menthene-3,8-diol and the corresponding racemates: Preparation and assignment of configuration

A 1:1 mixture of the racemic trans- and cis-1-p-menthene-3,8-diols ((±)- 3 and (±)- 4 , resp.) was readily prepared in 3 steps starting from 3-methyl-2-cyclohexen-1-one. The relative configuration of the diols, purified via the corresponding cyclocarbonates, was assigned by ¹H-NMR spectroscopy and found to be at variance with tentative claims in the literature. Optically active samples of 3 and 4 were prepared by resolution of the racemates with (R)-1-phenylethylamine. The absolute configuration of the resulting diols was determined by chemical correlation with standards of known absolute configuration.     

Rapid determination of corticosteroids in pharmaceuticals by flow injection analysis

The proposed method is based on the reduction of blue tetrazolium by the steroid in an alkaline medium to form a highly colored formazan. The effects of reagent concentration, temperature, flow rate, and manifold design on the reaction are discussed for a typical steroid, methylprednisolone acetate. Analytical readout is obtained within 30 s after sample introduction and up to 100 samples/h can be processed with baseline resolution between peaks. Typical relative standard deviations of 0.5% are obtained with 10-μ1 injection volumes. Results obtained by flow injection analysis are similar to those obtained with the AutoAnalyzer technique.     

The platinum catalyst [bpyrPtCl2] in superacidic solution

The methane oxidation catalyst [bpyrPtCl(2)] (bpyr = bis-pyrimidine) dissolves in superacidic HF/SbF(5) solution under formation of a dinuclear cation [H(2)bpyrPt(mu-Cl)(2)PtbpyrH(2)](6+). Two crystal forms are isolated, [Pt(2)Cl(2)bpyr(2)H(4)](6+)(SbF(6)(-))(4)(Sb(2)F(11)(-))(2).2HF (I) (triclinic, Ponemacr;, a = 814.8(2) pm, b = 1444.8(3) pm, c = 2300.5(5) pm, alpha = 89.627(4) degrees, beta = 84.285(4) degrees, gamma = 84.665(4) degrees, Z = 2) and [Pt(2)Cl(2)bpyrH(4)](6+)(Sb(2)F(11)(-))(6).4HF (II) (triclinic, Ponemacr;, a = 879.4(2) pm, b = 1170.4(3) pm, c = 1789.9(5) pm, alpha = 95.37(2) degrees, beta = 99.97(2) degrees, gamma = 100.41(2) degrees, Z = 1). The cation in I has an angle of 148.4(1) degrees between the two square plane platinum environments, while the cation in II is fully planar. The non-platinum-bound nitrogen atoms are all protonated in the superacidic medium.     

Facile synthesis of novel functionalized bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) derivatives

An improved and efficient synthetic route to four functionalized bis(ethylenedithio)-tetrathiafulvalene (BEDT-TTF) derivatives 2-5 is reported. Tetrathiolate 1 was readily prepared from 2,2'-bis(1,3,4,6-tetrathiapentalen-5-one) under carefully controlled conditions. Subsequent reaction of 1 with selected primary alkyl halides affords new functionalized BEDT-TTF derivatives in good yields.     

Sequential injection spectrophotometric determination of trace amounts of iodide by its catalytic effect on the 4,4'-methylenebis(N,N-dimethylaniline)-chloramine-T reaction

A simple and sensitive sequential injection spectrophotometric procedure is proposed for the determination of trace amounts of iodide in pharmaceutical preparations. The method is based on the catalytic effect of iodide on the (tetra base) 4,4′-methylenebis(N,N-dimethylaniline)-chloramine-T reaction in acidic solution. The method involves a sequential aspiration of 255 μl sample/standard followed by 170 μl tetra base and then 128 μl chloramine-T solutions into a carrier stream to be stacked inside a holding coil and flow reversed through a reaction coil towards a detector. The resulting colored compound is measured at 600 nm using an UV/Vis-spectrophotometer. All the parameters that affect the reaction were evaluated and the calibration curve is linear over a range of 0.1–6.0 μg l⁻¹ of iodide concentration with detection limit of 0.05 μg l⁻¹. A sample throughput of 80 samples per hour and relative standard deviation of less than 2.0% was achieved. The method is successfully applied for the determination of iodide in three different samples (tablets).     

Synthesis, structure, and dynamics of six-membered metallacoronands and metallodendrimers of iron and indium

In the reaction of the N-substituted diethanolamines (H(2)L(1-3)) (1-3) with calcium hydride followed by addition of iron(III) or indium(III) chloride, the iron wheels [Fe(6)Cl(6)(L(1))(6)] (4) and [Fe(6)Cl(6)(L(2))(6)] (6) or indium wheels [In(6)Cl(6)(L(1))(6)] (5), [In(6)Cl(6)(L(2))(6)] (8) and [In(6)Cl(6)(L(3))(6)] (9) were formed in excellent yields. Exchange of the chloride ions of 6 by thiocyanate ions afforded [Fe(6)(SCN)(6)(L(2))(6)] (7). Whereas the structures of 4, 5 and 7 were determined unequivocally by single-crystal X-ray analyses, complexes 8 and 9 were characterised by NMR spectroscopy. Contrary to what is normally presumed, the scaffolds of six-membered metallic wheels are not generally rigid, but rather undergo nondissociative topomerisation processes. This was shown by variable temperature (VT) (1)H NMR spectroscopy for the indium wheel [In(6)Cl(6)(L(1))(6)] (5) and is highlighted for the enantiotopomerisation of one indium centre [ 1/6[S(6)-5]<==>[1/6[S(6)-5']]. The self-assembly of metallic wheels, starting from diethanolamine dendrons, is an efficient strategy for the convergent synthesis of metallodendrimers.     

Multicomponent coupling reactions for organic synthesis: chemoselective reactions with amide-aldehyde mixtures

The acid-catalyzed condensation chemistry of simple amides and aldehydes provides a highly prolific source of diverse reactants for irreversible follow-up reactions. Amide-aldehyde mixtures have been successfully employed in multicomponent syntheses of N-acyl alpha-amino acids (via palladium-catalyzed amidocarbonylation) and various cyclohexene, cyclohexadiene, and benzene derivatives (via the amide-aldehyde-dienophile (AAD) reaction).