Surface properties of Ni-Pt/SiO2 catalysts for N2O decomposition and reduction by H2

The surface properties of bimetallic Ni-Pt/SiO2 catalysts with variable Ni/Ni + Pt atomic ratio (0.75, 0.50, and 0.25) were studied using N2O decomposition and N2O reduction by hydrogen reactions as probes. Catalysts were prepared by incipient wetness impregnation of the silica support with aqueous solutions of the metal precursors to a total metal loading of 2 wt %. For both model reactions, Pt/SiO2 catalyst was substantially more active than Ni/SiO2 catalyst. Mean particle size by TEM was about the same (in the range 6-8 nm) for all catalysts and truly bimetallic particles (more than 95%) were evidenced by EDS in the Ni-Pt/SiO2 catalysts. CO adsorption on the bimetallic catalysts showed differences in the linear CO absorption band as a function of the Ni/Pt atomic ratio. Bimetallic Ni-Pt/SiO2 catalysts showed, for the N2O decomposition, a catalytic behavior that points out an ensemble-size sensitive behavior for Ni-rich compositions. For the N2O + H2 reaction, the bimetallic catalysts were very active at low temperature. The following activity order at 300 K was observed: Ni75Pt25 > Ni25Pt75 approximately Ni50Pt50 > Pt. TOF values for these catalysts increased 2-5 times compared to the most active reference catalyst (Pt/SiO2). The enhancement of the activity in the Ni75Pt25 bimetallic catalysts is explained in terms of the presence of mixed Ni-Pt ensembles.     

Analytical approaches to expanding the use of capillary electrophoresis in routine food analysis

Capillary Electrophoresis (CE) is becoming an ever more powerful analytical technique for the separation, identification, and quantification of a wide variety of compounds of interest in many application fields. Particularly in food analysis this technique can offer interesting advantages over chromatographic techniques because of its greater simplicity and efficiency. Nevertheless, CE needs to advance with regard to compatibility with sample matrices, sensitivity, and robustness of the methodologies in order to gain even wider acceptance in food analysis laboratories, specially for routine work. This article presents various approaches to expanding the analytical usefulness of CE in food analysis, discussing their advantages over conventional CE. These approaches focus on sample screening, automated sample preparation with on-line CE arrangements, and the automatic integration of calibration in routine analytical work with CE.     

Adiabatic squeezing of molecular wave packets by laser pulses

Strong pulse sequences can be used to control the position and width of the molecular wave packet. In this paper we propose a new scheme to maximally compress the wave packet in a quasistatic way by freezing it at a peculiar adiabatic potential shaped by two laser pulses. The dynamic principles of the scheme and the characteristic effect of the different control parameters are presented and analyzed. We use two different molecular models, electronic potentials modeled by harmonic oscillators, with the same force constants, and the Na(2) dimer, to show the typical yield that can be obtained in compressing the initial (minimum width) molecular wave function.     

Dexamethasone delivery to posterior segment of the eye

Due to anatomic barriers and lacrimal drainage it is difficult to obtain therapeutic drug concentrations in the posterior part of the eye after topical drug administrations. Lipophilic cyclodextrins, such as randomly methylated β-cyclodextrin (RMβCD), are known to act both as solubilizers of water-insoluble drugs in aqueous solutions and as penetration enhancers that reduce the barrier function of lipophilic membranes. The purpose of this study was to investigate the effects of RMβCD on dexamethasone delivery from aqueous eye drop solution into rabbit eyes. Dexamethasone (0.5 and 1.5% w/v) drops (50 μl) were administered to the left eye of rabbits (n = 6) and the drug levels measured in different eye tissues 2 h after administration. In aqueous humor dexamethasone levels were 1,190 ± 110 and 1,670 ± 630 ng/g (mean ± SD) after administration of the 0.5 and 1.5% dexamethasone eye drops, respectively. In the retina the levels were 33 ± 7 and 66 ± 49 ng/g, and in optic nerve 41 ± 12 and 130 ± 50 ng/g, respectively. In a previous study the dexamethasone concentration in aqueous humor after topical administration of 1.3% (w/v) dexamethasone eye drops in aqueous 2-hydroxypropyl-β-cyclodextrin (HPβCD) solution was determined to be 320 ± 230 ng/g and 66 ± 20 ng/g after administration of Maxidex^® eye drops. Both the hydrophilic HPβCD and the lipophilic RMβCD enhance topical dexamethasone delivery into the eye, but of the two, the lipophilic RMβCD results in higher dexamethasone concentrations.     

LC–MS Determination of Sterols in Olive Oil

Sterols in olive oils have been analyzed by liquid chromatography coupled to mass spectrometry with atmospheric-pressure chemical ionization in positive-ion mode. A simple procedure based on saponification and extraction of the compounds from olive oils was studied. Validation of the method included calibration and determination of recovery and repeatability was carried out. Good linearity was obtained up to 100 mg kg^?1 for all the sterols studied except β-sitosterol, for which linearity was obtained up to 2,000 mg kg^?1. Recovery ranged from 88 to 110%, detection limits from 0.9 to 3.1 mg kg^?1, and precision was good. The method has been successfully used for analysis of sterols in different types of oil. The predominant sterol was β-sitosterol; other minor components, for example sitostanol and cholesterol, were also detected. Total sterol content depended on the type of oil, and ranged from 687 to 2,479 mg kg^?1. Stigmasterol and the amount of erythrodiol plus uvaol can be used to distinguish between olive oil and seed oil.     

Preconcentration and speciation of chromium in waters using solid-phase extraction and atomic absorption spectrometry

A method for the preconcentration and speciation of chromium was developed. After formation of an anionic compound with ethylenediaminetetraacetic acid (CrY(-)), Cr (VI) and Cr (III) are retained on a strong anionic phase (SAX) and controlled elution with 0.5 M NaCl permits their speciation. The retention and elution conditions were optimised, and interferences due to the presence of other ions such as Mg(II), Mn(II), Sn(II), Fe(III), Ba(II), Al(III), Ca(II), chloride, iodine, bromide, fluoride, sulphate, phosphate, bicarbonate and nitrate were studied. The detection limits were 0.4 mug l(-1) and 1.1 mug l(-1) for Cr(III) and Cr(VI), respectively, and reproducibility was 9%. The results obtained for speciation of chromium by the proposed method in wastewaters are in agreement with the values obtained by a reference method for a 95% confidence level.     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.     

Regioselective homogeneous hydrogenation of heteroaromatic nitrogen compounds by use of [RuH(CO)(NCMe)2(PPh3)2]BF4 as the precatalyst

Summary The complex [RuH(CO)(NCMe)₂(PPh₃)₂]BF₄ (1) is an efficient and regioselective catalyst precursor for the hydrogenation of polyaromatic nitrogen compounds such as quinoline (Q), isoquinoline (iQ), indole (ln), 5,6- and 7,8-benzoquinoline (BQ) and acridine (A) under relatively mild reaction conditions (125 °C, 4 atm H₂). The order of individual initial rates was: A > Q > 5,6-BQ > 7,8-BQ > ln > iQ, reflecting both steric and electronic effects. For the regioselective homogeneous hydrogenation of A to 9,10-dihydroacridine (DHA) catalysed by complex (1), a kinetic study was carried out; the experimentally determined rate law was r = k ₁ [Ru] [H₂]. These findings are consistent with a mechanism involving the hydrogenation of [RuH(CO)(A)(NCMe)(PPh₃)₂]BF₄ to yield DHA and the unsaturated species [RuH(CO)(NCMe)(PPh₃)₂]BF₄ in the rate-determining step.     

Magnetic properties of biacetyldihydrazone complexes

Summary Magnetic susceptibilities of the biacetyldihydrazone (BdH) complexes [M(BdH)₃](NO₃)₂ (M = Co^II, Ni^II, Cu^II or Zn^II), [Fe(BdH)₃](NO₃)₃, [M(BdH)₃](Ni(dto)₂] (M = Co^II, Ni^II or Zn^II; dto = dithiooxalate), [(BdH)₂Cu(dto)Ni(dto)] and [Fe(BdH)₃]₂[Ni(dto)₂]₃ have been studied in the 4.2–295 K range. Zn^II complexes are diamagnetic, and complexes of Ni^II, Cu^II and Fe^III obey the Curie-Weiss law. The Co^II complexes behave anomalously and the results are interpreted in terms of a high spinlow spin equilibrium.     

Spectrophotometric determination of chlorhexidine with bromocresol green by flow-injection and manual methods

A spectrophotometric study of the chlorhexidine/bromocresol green/Triton X-100 system is reported; at pH 5.3, both 2:1 and 1:1 bromocresol green/chlorhexidine complexes are formed. In the manual spectrophotometric method, Beer's law is obeyed for chlorhexidine concentrations of 2.9–32.2 μg ml^?1 (r.s.d. 0.4–1.3%); the molar absorptivity is 12 500 l mol^?1 cm^?1. In the flow-injection method, the calibration graph is linear for the chlorhexidine range 23.0–83.9 μg ml^?1 (r.s.d. 0.8%); the injection is ca. 60 h^?1. Benzocaine, acetylsalicylic acid, ascorbic acid and sucrose are tolerated at 10^?2?10^?3 M levels. Hibitane 5% was analyzed successfully.