Estimates of the energy of intramolecular hydrogen bonds

A method for the estimation of the energy of intramolecular hydrogen bonds in conjugated systems existing in a variety of conformations is presented. The method is applied to determine the intramolecular hydrogen bond energy in 3-aminopropenal and 3-aminopropenthial. According to the proposed estimation scheme, the intramolecular H-bond energies are found to be of the order of 5-7 kcal/mol. These results are compared with those obtained by using other estimation schemes as well as with the recent results by other authors. Also, the H-bond energies in dimers and trimers of the two molecules are calculated and compared with the corresponding data for internally hydrogen-bonded monomers. This comparison shows that the bond equalization effect is primarily due to proton donor-proton acceptor proximity. In comparison with intermolecular hydrogen bonds, the rigidity of the chelate skeleton enhances this proximity effect. The same effect can be seen in systems with intermolecular hydrogen bonds, although its magnitude is diminished because of the absence of additional forces which pull the proton donor and proton acceptor groups toward each other. No specific resonance-assisted origin of the intramolecular hydrogen bond energy seems to be needed to elucidate the energetics of these bonds.     

Study of the selection mechanism of heavy metal (Pb2+, Cu2+, Ni2+, and Cd2+) adsorption on clinoptilolite

The study was carried out on the sorption of heavy metals (Ni2+, Cu2+, Pb2+, and Cd2+) under static conditions from single- and multicomponent aqueous solutions by raw and pretreated clinoptilolite. The sorption has an ion-exchange nature and consists of three stages, i.e., the adsorption on the surface of microcrystals, the inversion stage, and the moderate adsorption in the interior of the microcrystal. The finer clinoptilolite fractions sorb higher amounts of the metals due to relative enriching by the zeolite proper and higher cleavage. The slight difference between adsorption capacity of the clinoptilolite toward lead, copper, and cadmium from single- and multicomponent solutions may testify to individual sorption centers of the zeolite for each metal. The decrease of nickel adsorption from multicomponent solutions is probably caused by the propinquity of its sorption forms to the other metals and by competition. The maximum sorption capacity toward Cd2+ is determined as 4.22 mg/g at an initial concentration of 80 mg/L and toward Pb2+, Cu2+, and Ni2+ as 27.7, 25.76, and 13.03 mg/g at 800 mg/L. The sorption results fit well to the Langmuir and the Freundlich models. The second one is better for adsorption modeling at high metal concentrations.     

Femtosecond transient absorption, Raman, and electrochemistry studies of tetrasulfonated copper phthalocyanine in water solutions

Ultrafast time-resolved electronic spectra of the primary events induced in the copper tetrasulfonated phthalocyanine Cu(tsPc)4-) in aqueous solution has been measured by femtosecond pump-probe transient absorption spectroscopy. The primary events initiated by the absorption of a photon occurring within the femtosecond time scale are discussed on the basis of the electron transfer mechanism between the adjacent phthalocyanine rings proposed recently in our laboratory. The femtosecond transient absorption results are compared with the low temperature emission spectra obtained with Raman spectroscopy and the voltammetric curves.     

Adsorption of lanthanides on mordenite from nitrate medium

The adsorption of lanthanides (except for Pm) on mordenite was investigated under various solution conditions of nitrate ion concentrations ([NO*3]: 0.001-2 mol/dm3) and total lanthanide concentrations (0.0005 mol/dm3). Solutions of lanthanide nitrates were equilibrated with zeolite samples at 296 K. A concave tetrad effect was evident in the change of logK d values within the lanthanide series and an explanation by a comparison of covalence in Ln-O bonds existing in triple bond Al-O(1/3Ln)-Si species found in the zeolite phase and in Ln(H2O)3+x or Ln(NO3) n-3 n complexes formed in the aqueous phase is presented. The decreasing trend in C1 and C3 coefficients, which are the function of E1 and E3 Racah f-interelectron repulsion parameters, is evidence of the magnification of covalence in Ln-O bond in the series triple bond S-iO(1/3Ln)-Al triple bond 相似文献   

Effects of reagents’ nature on mechanochemical synthesis of calcium titanate

The effect of alkaline hydrothermal activation of class-C fly ash belite cement was studied using thermal analysis (TG/DTG) by determining the increase in the combined water during a period of hydration of 180 days. The results were compared with those obtained for a belite cement hydrothermally activated in water. The two belite cements were fabricated via the hydrothermal-calcination route of class-C fly ash in 1 M NaOH solution (FABC-2-N) or demineralised water (FABC-2-W). From the results, the effect of the alkaline hydrothermal activation of belite cement (FABC-2-N) was clearly differentiated, mainly at early ages of hydration, for which the increase in the combined water was markedly higher than that of the belite cement that was hydrothermally activated in water. Important direct quantitative correlations were obtained among physicochemical parameters, such as the combined water, the BET surface area, the volume of nano-pores, and macro structural engineering properties such as the compressive mechanical strength.     

Co-digestion of agricultural and industrial wastes

The efficiency of anaerobic digestion process is dependent on the type and composition of the material to be digested. This work examines the co-digestion of corn silage, beet pulp silage, carrot residues, and cheese whey in different configurations together with a glycerin fraction — the waste product of transestrification of oils (biodiesel production) in a 25 L bioreactor operated mesophically in a quasi-continuous mode. Co-digestion of corn silage with carrot residues appeared to be more effective than that with cheese whey resulting in the gas production rate equal to 5.9 L L⁻¹ d⁻¹ and 1.4 L L⁻¹ d⁻¹, respectively. The performed experiments showed that a combination of three substrates: corn silage, cheese whey, and glycerin fraction resulted in the highest methane content equal to 61 % and the biogas production rate of 1.8 L L⁻¹ d⁻¹.     

DFT studies on tautomeric preferences of 1-(pyridin-2-yl)-4-(quinolin-2-yl)butane-2,3-dione in the gas phase and in solution

Density functional theory (DFT) calculations show that in vacuum such α-diketone as 1-(pyridin-2-yl)-4-(quinolin-2-yl)butane-2,3-dione is much less stable than its enolimine–enaminone ((1Z,3Z)-3-hydroxy-4-(pyridin-2-yl)-1-(quinolin-2(1H)-ylidene)but-3-en-2-one) and dienaminone tautomers ((1Z,3Z)-1-(pyridin-2-yl)-4-(quinolin-2-yl)buta-1,3-diene-2,3-diol). Other its tautomers (multiple basic and acidic centers in their molecules enable multiple proton transfer to take place) are even more labile. Strength of the intramolecular hydrogen bonds and aromatic character of the (quasi)rings [proved by the Harmonic Oscillator Model of Aromaticity (HOMA) index] in their molecules were found to be responsible for the observed tautomeric preferences. Polar and basic solvent disfavors and favors the enolimine and enaminone tautomers, respectively.     

Identification of acrylate copolymers using pyrolysis and gas chromatography

A combination of pyrolysis and gas chromatography were used to investigate thermal degradation products formed from acrylic copolymers containing alkyl acrylate and methacrylate. The method provided an analytical tool for characterizing the chemical composition and structure of the degradation products. Thermal degradation of the synthesized copolymers was analyzed using isothermal (250 °C) pyrolysis–gas chromatography. The degradation process, and the nature and amount of pyrolysis products, provides relevant information about the thermal degradation of acrylic copolymers and the mechanism of pyrolysis. During pyrolysis, the formation of corresponding olefins, alcohols, acrylates and methacrylate was observed.     

Fluorescent chemosensors for metal ions based on 3-(2-benzoxazol-5-yl)alanine skeleton

The ability of new chelate ligands, benzoxazol-5-yl-alanine derivatives substituted in position 2 by heteroaromatic substituent, to form complexes with selected metal ions in acetonitrile are studied by means of absorption and steady-state and time-resolved fluorescence spectroscopy. Among the ligands studied, only azaaromatic derivatives form stable complexes with transition metal ions in the ground state. Their absorption bands are bathochromically shifted enabling to use those ligands as ratiometric sensors. The fluorescence of each ligand is quenched by metal ions, however, in the presence of Cd(II) and Zn(II) ions a new red shifted emission band is observed.