Effect of oxygen exposure on the magnetic properties of ultrathin Co/Ge(1 1 1) films

Influences of oxygen exposure on the magnetic properties of Co/Ge(1 1 1) ultrathin films have been investigated by surface magneto-optic Kerr effect technique. As the oxygen exposure increases on Co/Ge(1 1 1) films, their magnetic properties could be modified. As an example for 15 ML Co/Ge(1 1 1) films, the coercivity increases from 730 to 920 Oe and the remanence Kerr intensity is reduced for 500 Langmuir (L) of oxygen exposure. Corresponding compositions analyzed by Auger electron spectroscopy measurement shows that the amount of oxygen on the surface layers increases with increasing the oxygen exposure time. Oxygen distributes on the topmost layers of the film. The adsorbed oxygen influences the electronic density of states of Co and results in the changes of the magnetic properties. Besides, the appearance of O/Co/Ge interface could modify the stress anisotropy, and as a result the coercivity of ultrathin Co/Ge(1 1 1) film is enhanced.     

Efficient multi and single line atomic fluorine lasers

Intense multi- and single-line laser operation is reported from semiconductively preionised atomic fluorine lasers employing an optimised capacitor transfer excitation circuitry. The performance and spectral characteristics of these lasers are discussed and compared to the characteristics of previously described atomic fluorine lasers. The efficiency of one of these lasers described, at optimum conditions, is reaching a value as high as 0.14%. To the best of our knowledge, this is the highest efficiency reported up date, for an atomic fluorine laser.     

Preparation of MgB<Subscript>2</Subscript>/Fe superconductor wire by electrical self-heating

MgB₂/Fe wires were prepared by electrical self-heating of in situ powder-in-tube wires for the first time at ambient conditions. Characterization of the wires processed at 750 °C, 800 °C and 850 °C for 15 min by XRD, SEM, ϱ–T, susceptibility and J_C measurements shows that the MgB₂ formed is of high quality particularly with respect to phase purity and transport J_C. The method considerably reduces the overall energy consumption vis-à-vis the production cost, simplifies the complexity of the fabrication procedure and is promising for manufacture of high-quality MgB₂ superconducting wires. PACS 74.70.Ad; 74.62.Bf; 74.25.Fy; 74.25.Ha; 81.20.Hy     

Long-wavelength GaInAsSb/AlGaAsSb DFB lasers emitting near 2.6 μm

We have successfully fabricated and characterized room temperature continuous wave (cw) GaInAsSb/AlGaAsSb distributed feedback lasers emitting in the wavelength region between 2.499 and 2.573 μm. To the best of our knowledge, this is the longest emission wavelength realized with a GaSb-based DFB laser diode. The laser structure used for DFB processing was grown by solid source molecular beam epitaxy. A DFB concept requiring no subsequent overgrowth step was used by defining first-order Cr-Bragg gratings laterally patterned to a ridge waveguide. Threshold currents smaller than 60 mA and room temperature cw output powers up to 6.5 mW were obtained. The laser diodes show single mode emission with side mode suppression ratios (SMSR) of up to 32 dB.     

Some observations on uncertainty propagation through a simple nonlinear system

This paper discusses a number of issues relating to the analysis of uncertain systems or data in the context of (low-frequency) structural dynamics. In order to illustrate potential problems in applying ‘classical’ uncertainty analysis methods to nonlinear systems, a simple nonlinear system is simulated and the breakdown of two standard approaches is demonstrated on data from the system. By relaxing the requirements of the analysis, it is shown that an alternative uncertainty theory gives useful qualitative information about the system. This motivates a discussion of how uncertainty frameworks should be chosen to suit the problem in hand and leads to a clustering of uncertainty problems in structural dynamics into three types: quantification, fusion and propagation.     

100-TW femtosecond laser based on parametric amplification

In experiments on the parametrical amplification of femtosecond pulses in wide-aperture DKDP crystals, a power of more than 100 TW has been reached, which is much higher than the record level achieved in such lasers. The energy efficiency obtained for the parametric amplifier is equal to 27%. The energy of a 72-fs pulse is equal to 10 J.     

Imino Diels–Alder adducts. XII. Two pyrano[3,2‐c]quinolines

The crystal structures of pyrano­quinolines 9‐fluoro‐5‐phenyl‐3,4,4a,5,6,10b‐hexa­hydro‐2H‐pyrano[3,2‐c]quinoline, C₁₈H₁₈FNO, and 9‐methyl‐5‐phenyl‐3,4,4a,5,6,10b‐hexa­hydro‐2H‐pyrano­[3,2‐c]quinoline, C₁₉H₂₁NO, are isomorphous. In both structures, the pyran ring is exo to the six‐membered N‐heterocyclic ring formed in the cyclo­addition step. The torsion angles across the phenyl linkage for the two structures are −91.2 (1) and −88.3 (2)°. The striking feature in both crystal packings is that they do not contain the expected conventional hydrogen bonds, in spite of the presence of good hydrogen‐bonding functionalities. Possible C—H⋯π inter­actions are, however, observed.     

<Superscript>6</Superscript>He + <Superscript>6</Superscript>He Clustering of <Superscript>12</Superscript>Be in a Microscopic Algebraic Approach

The norm kernel of the A=12 system composed of two ⁶He clusters, and the L=0 basis functions (in the SU(3) and angular momentum-coupled schemes) are analytically obtained in the Fock-Bargmann space. The norm kernel has a diagonal form in the former basis, but the asymptotic conditions are naturally defined in the latter one. The system is a good illustration for the method of projection of the norm kernel to the basis functions in the presence of SU(3) degeneracy that was proposed by the authors. The coupled-channel problem is considered in the algebraic version of the resonating-group method, with the multiple decay thresholds being properly accounted for. The structure of the ground state of ¹²Be obtained in the approximation of zero-range nuclear force is compared with the shell-model predictions. In the continuum part of the spectrum, the S-matrix is constructed, the asymptotic normalization coefficients are deduced and their energy dependence is analyzed.     

Finite element modal solutions of planar photonic crystal fibers with rectangular air-holes

Modal solutions of planar photonic crystal waveguides with rectangular air-holes are presented by using a rigorous full-vectorial finite element-based approach. The effective indices, mode field profiles, spot-sizes, power confinements, modal hybridness, beat lengths and group velocity dispersions are shown for the fundamental and higher order modes of the quasi-TE and TM polarizations.