Etude de la chloration du polychlorure de vinyle en fonction de sa tacticite

Polyvinyl chloride samples of various tacticity have been prepared and photochlorinated in CCl₄ for 4 hr. The chlorination degree correlates directly with the degree of syndiotacticity. Initial PVC with syndiotacticity about 56 per cent, which can be regarded as alternate sequences of syndiotactic and isotactic diads, is quickly chlorinated. The mechanism of chlorine attack on the macromolecula is directly connected with the stereoregularity.     

Primary photodamage sites and mitochondrial events after Foscan photosensitization of MCF-7 human breast cancer cells

To determine the initial photodamage sites of Foscan-mediated photodynamic treatment, we evaluated the enzymatic activities in selected organelles immediately after light exposure of MCF-7 cells. The measurements indicated that the enzymes located in the Golgi apparatus (uridine 5'-diphosphate galactosyl transferase) and in the endoplasmic reticulum (ER) (nicotinamide adenine dinucleotide [reduced] [NADH] cytochrome c [cyt c] reductase) are inactivated by the treatment, whereas mitochondrial marker enzymes (cyt c oxidase and dehydrogenases) were unaffected. This indicates that the ER and the Golgi apparatus are the primary intracellular sites damaged by Foscan-mediated PDT in MCF-7 cells. We further investigated whether the specific mitochondria events could be associated with Foscan photoinduced cell death. The dose response profiles of mitochondrial depolarization and cytochrome c release immediately after Foscan-based PDT were very different from that of overall cell death. By 24 h post-PDT the fluence dependency was strikingly similar for both mitochondrial alterations and cell death. Therefore, although mitochondria are not directly affected by the treatment, they can be strongly implicated in Foscan-mediated MCF-7 cell death by late and indirect mechanism.     

Magneto-optics of Ferritin

Measurements of Rayleigh light scattering, nonlinear light scattering in DC magnetic fields, and the Cotton-Mouton effect were carried out for 15 mM NaCl and water solutions of ferritin at room temperature. The spherical geometry of the molecule implies that it is optically isotropic. Such a macromolecule should not manifest magnetic anisotropy; however, in solution it shows induced magnetic birefringence (Cotton-Mouton effect) and changes in the intensity of the scattered light components. The analysis of the obtained results indicates the deformation of linear optical polarizability induced in the ferritin by a magnetic field as the main source of the magneto-optical phenomena observed. Light scattering and the CM effects theoretically depend on the linear magneto-optical polarizability, chi, and the nonlinear magneto-optical polarizability, eta. Using the theory describing the phenomena as well as the experimental data, the values of the anisotropy of linear magneto-optical polarizability components, chi(parallel) - chi(perpendicular) = -(1.3 +/- 0.7) x 10(-22) [cm3] (in SI units chi(parallel) - chi(perpendicular) = -(2.0 +/- 1.2) x 10(-33) [m3]), the linear optical polarizability, alpha = (alpha(parallel) + 2alpha(perpendicular))/3 = (3.9 +/- 1.0) x 10(-20) [cm3] (in SI units alpha = (3.52 +/- 0.09)x10(-4) [Cm2 V(-1)]), and its anisotropy, kappa(alpha) = (alpha(parallel) - alpha(perpendicular))/3alpha = -(0.06+/-0.03), nonlinear magneto-optical polarizability, eta = (eta(parallel) + 2eta(perpendicular))/3 = -(4.7 +/- 0.9) x 10(-30) [cm3 Oe(-2)] (in SI units eta = -(6.7 +/- 1.3) x 10(-18) [Cm4 V(-1) A(-2)]) and its anisotropy, kappa(eta) = (eta[parallel) - eta(perpendicular))/3eta = -(0.15 +/- 0.10), were deduced. Here alpha(parallel), eta(parallel), alpha(perpendicular), eta(perpendicular) are the optical and magneto-optical polarizability components along the parallel and the perpendicular axes of the axially symmetric molecule, respectively.     

Thermal Analysis of Hexachloroplumbate and Chlorides Containing Complex Divalent Lead 2,2'-bipyridine Cations

Lead(II) 2,2'-bipyridine hexachloroplumba tetetrahydrate was synthesized and investigated by DTA, TG and DTG. IR spectroscopy and other methods enabled the identification of some of the decomposition products. Comparative studies on the corresponding chlorides: [Pb(bipy)]Cl₂ and [Pb(bipy)₃]Cl₂, which can be considered as precursors of the hexachloroplumbate, were also undertaken. X-ray measurements enabled the tentative determination of the crystal structure of [Pb(bipy)]Cl₂. Hexachloroplumbate decomposes with the liberation of chlorine, water and organic ligands, and the process is accompanied by the simultaneous transition of Pb(IV)→Pb(II). Chlorides release only ligands upon heating. Residues comprised always PbCl₂. This revised version was published online in August 2006 with corrections to the Cover Date.     

New insights into the reaction of zinc alkyls with dioxygen

Studies on the reaction of zinc alkyls with O2 are reported which demonstrate that the selective oxygenation of organozinc compound is viable. The reaction of [EtZn(azol)]n (azol = deprotonated 1-aziridineethanol) with an excess of dry O2 in toluene affords the zinc ethylperoxide [EtOOZn(azol)]2[EtZn(azol)]2, while the analogous reaction between Me2Zn and O2 results in the isolation of the Me6Zn7(OMe)8 cluster in high yield.     

Supplementation with Magnesium Salts—A Strategy to Increase Nutraceutical Value of Pleurotus djamor Fruiting Bodies

The use of substrates supplemented with minerals is a promising strategy for increasing the nutraceutical value of Pleurotus spp. The current research was performed to analyze the effect of substrate supplementation with magnesium (Mg) salts on the Mg content, biomass, and chemical composition of pink oyster mushroom (Pleurotus djamor) fruiting bodies. Before inoculation, substrate was supplemented with MgCl₂ × 6 H₂O and MgSO₄, both salts were applied at three concentrations: 210, 420, and 4200 mg of Mg per 2 kg of substrate. The harvest period included three flushes. Substrate supplementation with 4200 mg of Mg caused the most significant decrease in mushroom productivity, of about 28% for both Mg salts. The dry matter content in fruiting bodies was significantly lower in the treatment in which 210 mg of Mg was applied as MgSO₄ in comparison to the control. Supplementation effectively increased the Mg content in fruiting bodies of P. djamor by 19–85% depending on the treatment, and significantly affected the level of remaining bioelements and anions. One hundred grams of pink oyster fruiting bodies, supplemented with Mg salts, provides more than 20% of the Mg dietary value recommended by the Food and Drug Administration (FDA); thus, supplementation can be an effective technique for producing mushrooms that are rich in dietary Mg. Although P. djamor grown in supplemented substrate showed lower productivity, this was evident only in the fresh weight because the differences in dry weight were negligible. Mg supplementation increased the antioxidant activity of the fruiting bodies, phenolic compounds, and some amino acids, including L-tryptophan, and vitamins (thiamine and l-ascorbic acid).     

Determination of sulphur by electrolytic hydrogenation

Certain sulphur compounds such as thiosulphuric acid, polythionic acids, thiocyanic acid, thioureas, thioamides and 2-mercapto-acids are readily electrolytically hydrogenated in 1N sulphuric acid to form hydrogen sulphide which is absorbed in potassium hydroxide solution and titrated with o-hydroxymercuribenzoic acid in the presence of dithizone as indicator. The electrolytic cell consists of a lead anode in 5N sulphuric acid, a porous ceramic tube as diaphragm, and a cathode made of soft iron. The first-order rate-constants of hydrogenation and the results of determination of sulphur in some sulphur compounds are presented. The limit of determination is 0.1 ppm.     

Primary and secondary relaxations in bis-5-hydroxypentylphthalate revisited

The molecular structure of bis-5-hydroxypentylphthalate (BHPP) is like dihexyl phthalate but having appended to it two hydroxyl end groups, which contribute additional dipole moments and capacity for hydrogen-bond formation. In a previously published dielectric study of the primary and secondary relaxations of BHPP, it was found that all the dynamic properties are normal except for the anomalously large width of the primary relaxation loss peak. There are two secondary relaxations, the relaxation time of the slower one increases with increasing pressure, whereas that of the faster one is practically insensitive to pressure. Hence, the slower secondary relaxation is the "universal" Johari-Goldstein (JG) [J. Chem. Phys. 53, 2372 (1970); 55, 4245 (1971)] relaxation in BHPP. All is well except if the observed large width of the primary relaxation were an indication of a corresponding large coupling parameter n=0.45 in the coupling model. Then the predicted relations between the primary relaxation time tau(alpha) and the JG relaxation time tau(JG) found previously to hold in many glass formers would be violated. It was recognized that this singular behavior of BHPP is likely due to broadening of the primary loss peak by the overlapping contributions of two independent dipole moments present in BHPP, and the actual coupling parameter is smaller. However, at the time of publication of the previous work there were not enough data to support this explanation. By making broadband dielectric measurements of dibutyl phthalate (DBP) and dioctyl phthalate (DOP) that have chemical structures closely related to BHPP but with only one dipole moment, we show that all their dynamic properties are almost the same as BHPP but the widths of their primary relaxation loss peaks are significantly narrower corresponding to a smaller coupling parameter n=0.34. The new data presented here indicate that the coupling parameter of BHPP is about the same as DBP and DOP, and the predicted relations between tau(alpha) and tau(JG) of BHPP are brought back in agreement with the experimental data.     

Apparent molar volumes,heat capacities,and molecular excluded volumes of methylated,hydroxy and methoxy derivatives of 1-methylcytosine in aqueous solutions at 25°C

Densities and specific heat capacities of aqueous solutions: 1-methylcytosine; 1-methyl-N⁴-hydroxycytosine; 1,5-dimethylcytosine; I,N⁴-dimethylcytosine; 1,5-dimethyl-N⁴-hydroxycytosine; 1-methyl-N⁴-methoxycytosine; 1,N⁴,N⁴-trimethylcytosine, 1,5-dimethyl-N⁴-methoxycytosine were determined using flow calorimetry and flow densimetry at 25°C. Apparent molar volumes and heat capacities were then determined. Molecular excluded volumes were evaluated. A relationship was found between the values of the increments in partial molar values and the kind of groups substituted. Four types of contributions were distinguished: substitution of hydrogen on C, N, and O (in OH group on N4) atoms by CH₃ group and replacement of hydrogen on N4 atom by OH group. The correlation between the experimental partial molar volumes and calculated molecular excluded volumes was also elaborated.     

Thin film platinum cuff electrodes for neurostimulation: in vitro approach of safe neurostimulation parameters

Thin film technology takes more and more importance in the development of biomedical devices dedicated to functional neurostimulation. Our research about the design of implant neurostimulating electrode is oriented toward thin film cuff electrodes based on a polyimide substrate covered by a chromium/gold/Pt film. The chromium/gold sputtered film serves as adhesion layer and current collector whereas platinum acts as an electrochemical actuator. The electrode surface has been designed to obey safe stimulation criteria (i.e. chemically inert noble metal, low electrode-electrolyte impedance, high electrochemical reversibility, high corrosion stability). The electrochemical behaviour of such platinum electrodes has been assessed and compared to a foil of platinum. Extensive in vitro characterisations of the both electrode types were carried out using AFM, SEM and electrochemical techniques. The role of enhanced surface roughness enabling high double layer capacitances to be achieved was clearly highlighted. The obtained results are discussed, with particular reference to thin film electrodes stability under in vitro electrical stimulation in NaCl 0.9% (physiological serum). Therefore, these thin film devices showed reversible PtOH formation and decomposition making them potentially attractive for the fabrication of implant stimulation cuff electrodes.