Electrical characterization of nylon-6 composite nanofibers

The electrical characteristics of nylon-6 nanofibers incorporated with TiO₂ and Fe₃O₄ nanoparticles were investigated. The resultant nanofibers exhibited good incorporation of nanoparticles. The impregnated TiO₂ and Fe₃O₄ nanoparticles into the nylon-6 nanofibers were confirmed by high resolution transmission electron microscopy (HR-TEM) and energy dispersive X-ray (EDX) spectroscopy studies. The electrical conductivity of the nylon-6 incorporated with TiO₂ and Fe₃O₄ composite nanofibers were higher than that of the pristine nylon-6 nanofibers. The impregnation of TiO₂ and Fe₃O₄ nanoparticles significantly enhanced the electrical property of the composite nanofibers. These polymeric/nanoparticles composite nanofibers structure may open a new direction for future organic electronics.     

Vibration characteristics of a piezoelectric open-shell transducer

This paper deals with the vibration characteristics of a piezoelectric open-shell transducer which was made by dividing a cylindrical piezoelectric transducer longitudinally into two segments. Two-dimensional governing equations were derived by using the cylindrical membrane theory. Applying mechanical and electrical boundary conditions yielded a characteristic equation for the resonance frequencies of the piezoelectric open-shell transducer. The fundamental frequency and the electromechanical coupling factor were calculated and compared with the results of the finite element analysis and experiment. The fundamental mode shape obtained theoretically was compared with the result of the finite element analysis. The theoretical analysis was verified to provide the vibration characteristics of an open-shell transducer.     

Corner hole adatom stacking fault structure of Bi on Au(1 1 1)

The surface atomic structure of Bi on Au(1 1 1) is studied with scanning tunneling microscopy. At about 0.5 monolayer of Bi, a well-ordered 6 × 6 atomic structure is observed. The structure has three notable features: corner holes, Bi adatoms, and stacking faults, very similar to a semiconductor surface of Si(1 1 1)-7 × 7. Out of 18 Bi surface atoms in a unit cell, six atoms are at hollow sites and are adatoms, and another six atoms are near-bridge sites. The last six atoms surround corner holes and are lower than other surface atoms by about 0.2 Å. A possible atomic model is proposed based on our observation.     

Wide range parametric study for the pool boiling of nano-fluids with a circular plate heater

The characteristics of boiling and critical heat flux (CHF) behavior of nano-fluids with alumina and silver nano-particles suspended in de-ionized water (pure water) were studied with circular plate heaters in the present study. Enhancements of CHF in nano-fluids in the wide range of particle sizes and concentrations were compared with those in pure water. Also, the effects of the particle deposition on CHF enhancement were investigated. All experiments were performed at the atmospheric pressure condition. The results show that the measured boiling curves in nano-fluids were shifted to the right and CHF were significantly enhanced for different nano-particle sizes and concentrations. The CHF of nano-fluids was increased as the size of the nano-particles decreased. On the other hand, nano-particle concentration value showing the maximum CHF had a critical value. In each pool boiling experiment of nano-fluids, nano-particles were deposited on the heater surface. Assuming that this phenomenon caused the CHF enhancement, pool boiling experiments of pure water were carried out with these nano-particle deposited heaters. The results of these tests were similar to those of the test of the nano-fluids for the CHF enhancement. The main cause of CHF enhancement was found to be the change of the heater surface structure. In order to analyze boiling phenomena of pure water and Al₂O₃ nano-fluids, boiling process was visualized by using a high speed camera.     

The emission wavelength tuning of InAs/InP quantum dots with thin GaAs, InGaAs, InP capping layers by MOCVD

InAs quantum dots (QDs) were grown on InP substrates by metalorganic chemical vapor deposition. The width and height of the dots were 50 and 5.8 nm, respectively on the average and an areal density of 3.0×10¹⁰ cm⁻² was observed by atomic force microscopy before the capping process. The influences of GaAs, In_0.53Ga_0.47As, and InP capping layers (5–10 ML thickness) on the InAs/InP QDs were studied. Insertion of a thin GaAs capping layer on the QDs led to a blue shift of up to 146 meV of the photoluminescence (PL) peak and an InGaAs capping layer on the QDs led to a red shift of 64 meV relative to the case when a conventional InP capping layer was used. We were able to tune the emission wavelength of the InAs QDs from 1.43 to 1.89 μm by using the GaAs and InGaAs capping layers. In addition, the full-width at half-maximum of the PL peak decreased from 79 to 26 meV by inserting a 7.5 ML GaAs layer. It is believed that this technique is useful in tailoring the optical properties of the InAs QDs at mid-infrared regime.     

Monolayer assembly and striped architecture of Co nanoparticles on organic functionalized Si surfaces

We present a new strategy to fabricate a monolayer assembly of Br-terminated Co nanoparticles on functionalized Si surfaces by using chemical covalent bonding and microcontact printing method. Self-assembled monolayers (SAMs) of the Co nanoparticles formed on the hydroxyl-terminated Si surface exhibit two-dimensional island networks with locally ordered arrays via covalent linkage between nanoparticles and surface. On the other hand, SAMs of the nanoparticles on the aminopropyl-terminated Si surface show an individual and random distribution over an entire surface. Furthermore, we have fabricated striped architectures of Co nanoparticles using a combination of microcontact printing and covalent linkage. Microcontact printing of octadecyltrichlorosilane and selective covalent linkage between nanoparticles and functionalized Si surfaces lead to a hybrid nanostructure with selectively assembled nanoparticles stripes on the patterned functionalized Si surfaces. PACS 81.07.Ta; 61.46.+w; 81.16.Dn; 81.16.Be; 68.37.Hk; 82.80.Pv     

Evaluation of stage acoustics in Seoul Arts Center Concert Hall by measuring stage support

Stage acoustics is an important characteristic for concert halls, both for the acoustic quality on stage and for the audience. However, relatively little research has been conducted into the question. This study was based on the investigation of an actual concert hall stage, that of the Seoul Arts Center Concert Hall in Korea. The stage acoustics was evaluated in the actual hall, and with two models: a 1:25 scale model and a computer model. The study was based on the stage support parameter ST1 proposed by Gade as a measure of support for individual performers [Acustica 65, 193-203 (1989)]. The variation of support was measured on the empty stage of the actual hall and in the two models. The effect of musicians on stage, the effect of moving the orchestra, the effect of ceiling height and of stage-wall profile were also investigated. Conclusions are drawn both relating to the Seoul Concert Hall stage and stages in general.     

Synthesis and characterization of chemically anchored adenosine with PHEMA grafted gold nanoparticles

The synthesis of chemically anchored adenosine with biocompatible poly(2-hydroxylethyl methacrylate) grafted gold nanoparticles (Ado-i-PHEMA-g-AuNPs) was realized by employing a simple strategy. Disulfide-containing poly(2-hydroxylethyl methacrylate) (DT-PHEMA) was initially synthesized by atom transfer radical polymerization (ATRP). The formation of DT-PHEMA was confirmed by ¹H-NMR and FT-IR. The molecular weight and molecular weight distribution were found to be 9.6 kg/mol and 1.40 from GPC analysis. DT-PHEMA was subsequently used for the synthesis of PHEMA-g-AuNPs by a grafting to protocol. The grafting of DT-PHEMA on the surface of AuNPs was confirmed by FT-IR, TGA, XPS, and EDX analyses. The particle size of the PHEMA-g-AuNPs was found to be ca. 5.0 nm from HR-TEM analysis. Boronic acid was used for functionalization of PHEMA-g-AuNPs, which was then subjected for covalent immobilization with adenosine via strong interaction between free hydroxyl groups of adenosine and boronic acid. Characterization and properties of the Ado-i-PHEMA-g-AuNPs were investigated by taking advantage from FT-IR, XPS, EDX, and UV-visible spectroscopy. The Ado-i-PHEMA-g-AuNPs nanocomposite exhibits a surface plasmon resonance peak at 586 nm which is red shifted from AuNPs (521 nm), indicating significant changes of surface property upon PHEMA-adenosine immobilization onto the surface of AuNPs.     

Three‐dimensional visible‐light capsule enclosing perfect supersized darkness via antiresolution

Supersized darkness in three dimensions surrounded by all light in free space is demonstrated theoretically and experimentally in the visible regime. The object staying in the darkness is similar to staying in an empty light capsule because light just bypasses it by resorting to destructive interference. A binary‐optical system is designed and fabricated based on achieving antiresolution (AR), by which electromagnetic energy flux avoids and bends smoothly around a nearly perfect darkness region. AR remains an unexplored topic hitherto, in contrast to the super‐resolution for realizing high spatial resolution. This novel scheme replies on smearing out the point spread function and thus poses less stringent limitations upon the object's size and position since the created dark (zero‐field) area reach 8 orders of magnitude larger than λ² in cross‐sectional size. It functions very well with arbitrarily polarized beams in three dimensions, which is also frequency scalable in the whole electromagnetic spectrum.     

Polymerization of aniline in the galleries of layered HNbMoO6

Insertion of aniline molecules and subsequent polymerization using FeCl₃ as an oxidizing agent were examined in the layers of rutile-type HNbMoO₆. Although the polyaniline/host ratio was variable depending on the amount of intercalated aniline before polymerization, the interlayer spacing was constant as 6.3 Å regardless of the ratios. Comparison of FT-IR and FT-Raman spectra for (PANI)_yNbMoO₆ (0.26≤y≤0.64) clearly showed that both quinoid and benzenoid forms exist in the galleries of inorganic host. IR and Raman active modes of extracted PANI from the matrix were quite similar to those of emeraldine salt.