Analysis of Biological Samples Using Paper Spray Mass Spectrometry: An Investigation of Impacts by the Substrates, Solvents and Elution Methods

Paper spray has been developed as a fast sampling ionization method for direct analysis of raw biological and chemical samples using mass spectrometry (MS). Quantitation of therapeutic drugs in blood samples at high accuracy has also been achieved using paper spray MS without traditional sample preparation or chromatographic separation. The paper spray ionization is a process integrated with a fast extraction of the analyte from the raw sample by a solvent, the transport of the extracted analytes on the paper, and a spray ionization at the tip of the paper substrate with a high voltage applied. In this study, the influence on the analytical performance by the solvent–substrate systems and the selection of the elution methods was investigated. The protein hemoglobin could be observed from fresh blood samples on silanized paper or from dried blood spots on silica-coated paper. The on-paper separation of the chemicals during the paper spray was characterized through the analysis of a mixture of the methyl violet 2B and methylene blue. The mode of applying the spray solvent was found to have a significant impact on the separation. The results in this study led to a better understanding of the analyte elution, on-paper separation, as well as the ionization processes of the paper spray. This study also helps in establishing a guideline for optimizing the analytical performance of paper spray for direct analysis of target analytes using mass spectrometry.     

Two New Abietane Diterpenoids from the Roots of Tripterygium wilfordii Hook. f.

Two new abietane‐type diterpenoids, named triptobenzene R ( 1 ) and triptobenzene S ( 2 ), together with three known abietane‐type diterpenoids, triptophenolide ( 3 ), triptonodiol ( 4 ), and triptonoterpene methyl ether ( 5 ), were isolated from the roots of Tripterygium wilfordii Hook . f. Their structures and relative configurations were established by detailed spectral studies, including 1D‐ and 2D‐NMR (HSQC, HMBC, and NOESY), and HR‐ESI‐TOF‐MS, and by comparison with published data. Their absolute configurations were assigned by the CD technique, applied for the first time to abietane diterpenes from Tripterygium wilfordii. Compound 2 is the first abietane‐type norditerpenoid isolated from the genus Tripterygium.     

The Reaction of 1-Nitro-4-(4-nitrophenylsulfonylmethyl)benzene with α,β-Unsaturated Esters

Under solid-liquid PTC conditions, treatment of 1-nitro-4-(4-nitrophenylsulfonyl-methyl)benzene(1) with α,β -unsaturated esters (2a-h) at 35–75°C gave tandem addition-rearrangement products(3a-h). While at higher temperature(75°C), addition-rearrangement-addition products (4a-b) were obtained when acrylates were used. Finally a possible mechanism is proposed.     

The Reaction of Ninhydrin with Trimethylbenzenes under Friedel-Crafts Reaction Conditions

The reaction of ninhydrin with 1,2,3- and 1,2,4-trimethylbenzene in the presence of H₂SO₄ or AlCl₃ afforded 2-monoaryl and 2,2-diaryl-1,3-indanedione derivatives as the major products. With 1,3,5-trimethylbenzene as the arene nucleophile, either a reduction product or an indenoindanone derivative was obtained depending upon the catalyst employed in the reaction.     

Fluorescence-based immunoassay for human chorionic gonadotropin based on polyfluorene-coated silica nanoparticles and polyaniline-coated Fe3O4 nanoparticles

We report on an ultrasensitive fluorescence immunoassay for human chorionic gonadotrophin antigen (hCG). It is based on the use of silica nanoparticles coated with a copolymer (prepared from a fluorene, a phenylenediamine, and divinylbenzene; PF@SiO₂) that acts as a fluorescent label for the secondary monoclonal antibody to β-hCG antigen. In parallel, Fe₃O₄ nanoparticles were coated with polyaniline, and these magnetic particles (Fe₃O₄@PANI) served as a solid support for the primary monoclonal antibody to β-hCG antigen. The PF@SiO₂ exhibited strong fluorescence and good dispersibility in water. A fluorescence sandwich immunoassay was developed that enables hCG concentrations to be determined in the 0.01–100 ng·mL^?1 concentration range, with a detection limit of 3 pg·mL^?1.

Synthesis and Fungicidal Activity of 5‐Aryl‐1‐(aryloxyacetyl)‐3‐(tert‐butyl or phenyl)‐4‐(1H‐1,2,4‐triazol‐1‐yl)‐4,5‐dihydropyrazole

A series of novel 5‐aryl‐1‐(aryloxyacetyl)‐3‐(tert‐butyl or phenyl)‐4‐(1H‐1,2,4‐triazol‐1‐yl)‐4,5‐dihydropyrazole 3a – 3n were synthesized by the annulation of 2‐aryloxyacetohydrazides with 3‐aryl‐1‐t‐butyl (or phenyl)‐2‐(1H‐1,2,4‐triazol‐1‐yl)prop‐2‐en‐1‐ones ( 2 ) in the presence of a catalytic amount of acetic acid. Compounds 2 were obtained by the Knoevenagel reactions of 1‐t‐butyl (or phenyl)‐2‐(1H‐1,2,4‐triazol‐1‐yl)ethanone ( 1 ) with aromatic aldehydes in the presence of piperidine. Their structures were confirmed by IR, ¹H‐NMR, ESI‐MS, and elemental analyses. The preliminary bioassay indicated that some compounds displayed moderate to excellent fungicidal activity. For example, compounds 3l , 3m , and 3n possessed 100% inhibition against Cercospora arachidicola Hori at the concentration of 50 mg/L.     

Hemin-adsorbed carbon felt for sensitive and rapid flow-amperometric detection of dissolved oxygen

Hemin was physically adsorbed onto porous carbon felt (CF), a microelectrode ensemble of micro-carbon fiber (ca. 7 μm in diameter) and possessing a three-dimensional random structure. The hemin-CF exhibited a well-defined redox wave that is due to Fe(III)/Fe(II) redox process in hemin, with a formal potential of ?0.32 V (vs. Ag/AgCl) in deoxygenated buffer solution of pH 7.0. The surface coverage of the electroactive hemin molecules on the surface of the CF was calculated to be 5.0?×?10^?11 mol cm^?2, and the apparent heterogeneous electron transfer rate constant is 3.35 s^?1. The hemin-CF electrode displays excellent electrocatalytic activity for the reduction of dissolved oxygen (DO), and the magnitude of the cathodic current increases with increasing concentrations of DO in the sample solution. The electrode was used as a flow-through detector for sensitive and rapid consecutive determination of DO. Deoxygenated pH 7.0 solutions were analyzed at a flow rate of 8.0 mL min^?1 at an applied potential of ?0.2 V, and highly reproducible cathodic peak current responses to DO were observed in the 0.72 to 13.3 mg L^?1 concentration range. The maximum throughput is 170 samples h^?1. The hemin-CF-based amperometric flow-sensor was applied to determine the concentration of DO in environmental water samples.

Preparation of self-supporting molecularly imprinted films via transition layer construction and RAFT polymerization, and their use in HPLC

Molecularly imprinted films with self-supporting property (SS-MIFs) have been prepared by using the strategy of transition layer construction followed by reversible addition-fragmentation chain transfer (RAFT) polymerization. The structure, composition and selectivity of the SS-MIFs as well as the mechanism of mass transfer were characterized by scanning electron microscopy, X-ray diffraction, Fourier transform IR spectrometry, specific surface area analysis, thermogravimetric analysis, and HPLC. Surface area analysis showed the samples possessed specific surface areas as high as 80.5 m².g^?1. This is almost 9 times more than that of the original porous anodic aluminum oxide substrate. Thermogravimetric analysis also showed the samples to be thermally stable up to 350 °C. The separating power was investigated by HPLC and revealed a selective separation effect for the target molecules theobromine. The separation factor is 5.37.

Synthesis of gold nanoparticles on the surface of pyrolytic graphite using penicillin as a stabilizing reagent and the catalytic oxidation of α-naphthylamine

Electrochemical synthesis of gold nanoparticles on the surface of pyrolytic graphite using penicillin as a stabilizing reagent was proposed. The gold nanoparticles were characterized by scanning electron microscopy, cyclic voltammetry, IR spectra, UV spectra, and powder X-ray diffraction spectra. The electro-chemical catalysis of penicillin for α-naphthylamine was demonstrated.     

Gold-nanoparticle on the surface of L-cysteine modified gold electrode and its application

A sensor based on gold nanoparticle on the surface of L-cysteine modified gold electrode is prepared. Electrochemical behavior of dopamine hydrochloride is investigated. The linear relation between peak current of dopamine hydrochloride and scan speed in the range of 10 to 1000 mV s^?1 indicates that a diffusion-adsorption controls the process. The linearity range is 1.05 × 10^?5–7.38 × 10^?4 M with detection limit of 1.05 × 10^?6 M. The recoveries were in the range from 99.8 to 101.5% with relative standard deviations of 1.3 ～ 2.3% (n = 6). The modified electrode under ambient conditions over a period of 2 weeks has an excellent repeatability and reproducibility.