Magnetron sputtering deposition of silicon nitride on polyimide separator for high-temperature lithium-ion batteries

To date,lithium-ion batteries are becoming increasingly significant in the application of portable devices and electrical vehicles,and revolutionary progress in theoretical research and industrial application has been achieved.However,the commercial polyolefin separators with unsatisfying electrolytes affinity and poor thermal stability have extremely restricted the further application of lithium-ion batteries,especially in the high-temperature fields.In this work,magnetron sputtering deposition technique is employed to modify the commercial polyimide separator by coating silicon nitride on both sides.Magnetron sputtering deposition modified polyimide(MSD-PI)composite separator shows high thermal stability and ionic conductivity.More importantly,compared with the cells using Celgard separator,the cells with MSD-PI separator exhibit superior electrochemical performance,especially long-term cycle performance under high temperature environment,owing to the high thermal conductivity of surface Si3 N4 particles.Hence,lithium-ion batteries with MSD-PI separator are capable of improving thermal safety and capacity retention,which demonstrates that magnetron sputtering deposition technique could be regarded as a promising strategy to develop advanced organic/inorganic composite separators for high-temperature lithium-ion batteries.     

低偏振相关损耗全息光栅波分复用器的设计

对基于掺杂铌酸锂材料的体光栅波分复用器主要结构和光栅记录参量提出了一种优化设计方法.采用严格耦合波理论,对两种偏振不同入射角和不同记录晶体厚度下的器件关键性能参量,如插入损耗和偏振相关损耗等进行了优化.数值结果证明采用优化设计的晶体厚度和光栅记录时的入射角,在获得相当低的偏振相关损耗的同时,也能够获得较低的插入损耗,实现了综合性能优化的波分复用器设计.实验结果证明用优化设计的参量能有效降低波分复用器件的插入损耗和偏振相关损耗.     

多光束在分形粗糙表面散射的仿真

采用矩量法(MOM),分析了多光束在分形粗糙导体表面的散射分布.对在不同入射角、光束宽度控制因子、光束照射区宽度、表面均方根高度和表面分维数情况下的散射进行了数值仿真.仿真结果表明了各参量的变化对散射分布的影响.根据仿真计算结果给出了最佳的散射测量区域,为减少多光束测量的误差提供了一定的参考.     

The role of cooling rate in crystallization-driven block copolymer self-assembly

Self-assembly of crystalline-coil block copolymers (BCPs) in selective solvents is often carried out by heating the mixture until the sample appears to dissolve and then allowing the solution to cool back to room temperature. In self-seeding experiments, some crystallites persist during sample annealing and nucleate the growth of core-crystalline micelles upon cooling. There is evidence in the literature that the nature of the self-assembled structures formed is independent of the annealing time at a particular temperature. There are, however, no systematic studies of how the rate of cooling affects self-assembly. We examine three systems based upon poly(ferrocenyldimethylsilane) BCPs that generated uniform micelles under typical conditions where cooling took pace on the 1–2 h time scale. For example, several of the systems generated elongated 1D micelles of uniform length under these slow cooling conditions. When subjected to rapid cooling (on the time scale of a few minutes or faster), branched structures were obtained. Variation of the cooling rate led to a variation in the size and degree of branching of some of the structures examined. These changes can be explained in terms of the high degree of supersaturation that occurs when unimer solutions at high temperature are suddenly cooled. Enhanced nucleation, seed aggregation, and selective growth of the species of lowest solubility contribute to branching. Cooling rate becomes another tool for manipulating crystallization-driven self-assembly and controlling micelle morphologies.

In the self-assembly of crystalline-coil block copolymers in solution, heating followed by different cooling rates can lead to different structures.     

噻唑类杀菌剂的合成及生物活性研究进展

噻唑类化合物具有较好的抗真菌,抗细菌及抗微生物活性,在新农药和医药中得到广泛地应用。简要介绍了国内外近年来噻唑类杀菌剂的合成及生物活性研究进展。参考文献38篇。     

气相色谱法分析氯氰菊酯异构体

比较了DB-1和HP-5石英毛细管柱在不同柱流速、柱温下对氯氰菊酯异构体的分离效果,表明采用DB-1石英毛细管柱(30m×0.25mmi.d.,0.25μm)较好,柱温为240℃,柱流速为12cm/s,分析时间40min。该分析方法重现性好,分析结果准确、可靠。     

脱氢枞胺及其衍生物的研究与应用进展

脱氢枞胺及其衍生物在手性拆分、金属离子浮选、表面活性、杀菌、医药、染料等领域有着重要的用途。本文对脱氢枞胺的制备、脱氢枞胺成盐衍生物以及脱氢枞胺成键衍生物的研究与应用进展进行了综述,并对脱氢枞胺及其衍生物的研究及应用前景进行了展望。     

Fe(Ⅳ)的合成及其稳定性研究

通过两种方法合成出Fe(Ⅳ)溶液,研究了Fe(Ⅳ)溶液的反应性、稳定性以及添加其他离子对Fe(Ⅳ)在水溶液中的稳定性的影响,并对Fe(Ⅵ)的反应历程进行了探讨。Fe(Ⅳ)离子的氧化性较Fe(Ⅵ)离子弱,可以氧化苯甲醇,而难以氧化间二甲苯;在Fe(Ⅳ)溶液中加入磷酸钠使其稳定性下降,而加入醋酸钠可显著提高Fe(Ⅳ)在溶液中的稳定性;Fe(Ⅳ)在溶液中的浓度越高越不稳定;随着碱浓度的增加Fe(Ⅳ)在溶液中的稳定性增强且在碱水溶液中Fe(Ⅳ)比Fe(Ⅵ)更稳定。     

Structural and Electrical Properties of Be_xZn_(1-x)O Alloys under High Pressure

We conduct extensive research into the structures of Be_xZn_1-xOO ternary alloys in a pressure range of 0-60GPa,using the ab initio total energy evolutionary algorithm and total energy calculations,finding several metastable structures.Our pressure-composition phase diagram is constructed using the enthalpy results.In addition,we calculate the electronic structures of the Be_xZn_1-xOO structures and investigate the bandgap values at varying pressures and Be content.The calculated results show that the bandgap of the Be_xZn_1-xOO ternary alloys increases with an increase in Be content at the same pressure.Moreover,the bandgap of the Be_xZn_1-xOO ternary alloys increases with the increasing pressure with fixed Be content.At the same Be content,the formation enthalpy of the Be_xZn_1-xOO ternary alloys first decreases,then increases with the increasing pressure.     

纳米碳管修饰铂结合溶胶-凝胶固定酶制备高性能胆碱生物传感器

为了提高胆碱传感器的灵敏度和抗干扰性,以纳米碳管修饰铂电极为基础电极,采用溶胶-凝胶法固定胆碱氧化酶(ChOx),构建了电流型胆碱检测生物传感器,对纳米碳管修饰电极的电化学特征进行分析,得知纳米碳管的引入不仅使电极对H2O2的催化电流增大,同时降低了电催化所需的恒定电位。讨论了缓冲液介质、pH值、酶负载量对传感器响应的影响。研究表明,所制备的传感器在pH 7.2、电位为0.15V条件下对氯化胆碱的线性响应范围为5.0×10-6~1.0×10-4mol/L;检出限为5.0×10-7mol/L;灵敏度为9.48μA/mmol/L。传感器的稳定性好,经过1个月,仍可保持初始电流的85%。抗干扰能力有很大提高。用于人体血清中的胆碱浓度测定,结果令人满意。