A tube-by-tube reduction method for simultaneous heat and mass transfer characteristics for plain fin-and-tube heat exchangers in dehumidifying conditions

This study proposed a new method, namely a tube-by-tube reduction method to analyze the performance of fin-and-tube heat exchangers having plain fin configuration under dehumidifying conditions. The mass transfer coefficients which seldom reported in the open literature, are also presented. For fully wet conditions, it is found that the reduced results for both sensible heat transfer performance and the mass transfer performance by the present method are insensitive to change of inlet humidity. Unlike those tested in fully dry condition, the sensible heat transfer performance under dehumidification is comparatively independent of fin pitch. The ratio of the heat transfer characteristic to mass transfer characteristic (h_c,o/h_d,o C_p,a) is in the range of 0.6~1.0, and the ratio is insensitive to change of fin spacing at low Reynolds number. However, a slight drop of the ratio of (h_c,o/h_d,o C_p,a) is seen with the decrease of fin spacing when the Reynolds number is sufficient high. This is associated with the more pronounced influence due to condensate removal by the vapor shear. Correlations are proposed to describe the heat and mass performance for the present plate fin configurations. These correlations can describe 89% of the Chilton Colburn j-factor of the heat transfer (j_h) within 15% and can correlate 81% of the Chilton Colburn j-factor of the mass transfer (j_m) within 20%.     

Effect of fin pattern on the air-side performance of herringbone wavy fin-and-tube heat exchangers

In the present study, new experimental data on the air-side performance of fin-and-tube heat exchangers having herringbone wavy fin configuration are presented. Different from most previous studies, the present experiments have been performed to determine the effects of fin patterns and edge corrugations on the air-side performance of the heat exchangers. The experimental apparatus consists essentially of a well-insulated open wind tunnel and herringbone wavy fin-and-tube heat exchangers made from aluminium wavy finned, copper tube. Two types of wavy fin patterns commonly in industrial use are investigated. Air and hot water are used as working fluids in air-side and tube-side, respectively. From the experimental results, it is found that the fin pattern has a significant effect on the heat transfer and flow characteristics. The corrugation at the fin edge enables the Colburn factor to decrease but it has almost no effect on the friction factor.     

Low-Pressure Chromatographic Separation of p-Hydroxybenzoates Using Sequential Injection with Lab-on-Valve System and Miniature Monolithic Column

The use of a small guard column (5-mm length) as a miniature analytical column in low-pressure liquid chromatography based on a sequential injection with lab-on-valve system was demonstrated. A strong initial mobile phase was used to rapidly deliver the sample zone to the column prior to simultaneous separation of analytes with weaker mobile phase. Separation of methyl-, ethyl-, propyl-, and butyl-4-hydroxybenzoates (MP, EP, PP, and BP) was achieved within about 120 s with sufficient peak resolution (all higher than 1.3) using 2,500 µL of mobile phase (composed of 1,087 µL of MeOH) per run. Detection limits were found to be 6.5, 8.0, 0.5, and 0.6 μmol L^?1 for MP, EP, PP, and BP, respectively. The system was tested with common commercially available skin lotions and wet wipe products. The analysis results were in good agreement with those obtained from the high-performance liquid chromatography with a 10-cm-length packed column.     

Polymer-assisted hydrothermal synthesis of Bi2S3 nanostructured flowers

Nanostructured Bi₂S₃ was hydrothermally produced from Bi₂O₃ and thiocarbohydrazide in acidic solutions containing PVA, PEG and PVP. By using XRD, SAED and Raman spectrometry, the products were orthorhombic Bi₂S₃, with four vibration modes at 139.6, 253.7, 310 and 968.9 cm⁻¹. The phase was also in accordance with the diffraction patterns obtained by simulation. SEM, TEM and HRTEM show that the products are clusters of nanorods produced in polymer-free solution, and nanostructured flowers of nanospears, nanorods and nanoplates in the respective PVA-, PEG- and PVP-added solutions, with their growths in the same direction of [0 0 1]. A formation mechanism was also proposed according to their phase and morphologies.     

Numerical evaluation on thermal–hydraulic characteristics of dilute heat-dissipating nanofluids flow in microchannels

The present work deals with numerical investigations on heat transfer characteristics and friction factor of aqueous CuO nanofluids flow in a set of four microchannels connected in parallel under laminar regime. For each single phase, volume of fluid, mixture and Eulerian models, a particular computer code is developed to carefully simulate this problem. The three-dimensional steady-state governing equations are solved through finite volume method. The primary aim of this study is to comparatively distinguish the most appropriate and accurate model for numerical studies of nanofluids in microchannels. The results are compared with one another and the data obtained from an experimental work. Regarding the results, an acceptable consistency is observed for all models with the experimental data. The current study truly demonstrates that applying single-phase model to simulate and evaluate the laminar flow of CuO–water nanofluid inside microchannels with uniform wall temperature is more modest, precise and reliable compared with two-phase models.

     

Characterization of MeWO4 (Me = Ba, Sr and Ca) nanocrystallines prepared by sonochemical method

Metal tungstates (MeWO₄, Me = Ba, Sr and Ca) were successfully prepared using the corresponding Me(NO₃)₂·2H₂O and Na₂WO₄·2H₂O in ethylene glycol by the 5 h sonochemical process. The tungstate phases with scheelite structure were detected with X-ray diffraction (XRD) and selected area electron diffraction (SAED). Their calculated lattice parameters are in accord with those of the JCPDS cards. Transmission electron microscopy (TEM) revealed the presence of nanoparticles composing the products. Their average sizes are 42.0 ± 10.4, 18.5 ± 5.1 and 13.1 ± 3.3 nm for Me = Ba, Sr and Ca, respectively. Interplanar spaces of the crystals were also characterized with high-resolution TEM (HRTEM). Their crystallographic planes are aligned in systematic array. Six different vibration wavenumbers were detected using Raman spectrometer and are specified as ν₁(A_g), ν₃(B_g), ν₃(E_g), ν₄(B_g), ν₂(A_g) and free rotation. Fourier transform infrared (FTIR) spectra provided the evidence of scheelite structure with W-O anti-symmetric stretching vibration of [WO₄]²⁻ tetrahedrons at 786-883 cm⁻¹. Photoluminescence emission of the products was detected over the range of 384-416 nm.     

Optimization and sensitivity analysis of magneto-hydrodynamic natural convection nanofluid flow inside a square enclosure using response surface methodology

This article studies buoyancy-driven natural convection of a nanofluid affected by a magnetic field within a square enclosure with an individual conductive pin fin. The effects of electromagnetic forces, thermal conductivity, and inclination angle of pin fin were investigated using non-dimensional parameters. An extensive sensitivity analysis was conducted seeking an optimal heat transfer setting. The novelty of this work lies in including different contributing factors in heat transfer analysis, rigorous analysis of design parameters, and comprehensive mathematical analysis of solution domain for optimization. Results showed that magnetic strength diminished the heat transfer efficacy, while higher relative thermal conductivity of pin fin improved it. Based on the problem settings, we also obtained the relative conductivity value in which the heat transfer is optimal. Higher sensitivity of heat transfer was, though, noticed for both magnetic strength and fin thermal conductivity in comparison to fin inclination angle. Further studies, specifically with realistic geometrical configurations and heat transfer settings, are urged to translate current findings to industrial applications.

     

Optimization of the finned double-pipe heat exchanger using nanofluids as working fluids

Journal of Thermal Analysis and Calorimetry - The heat exchanger pipe diameter has a significant effect on the flow characteristics as well as on the initial investment, operation and overall cost....     

Effect of nanoporous In2O3 film fabricated on TiO2-In2O3 photoanode for photovoltaic performance via a sparking method

Journal of Solid State Electrochemistry - A simple and inexpensive sparking method was used to deposit body-centered cubic In2O3 film on TiO2 photoanode for 30–180 min for...     

Degradation of rhodamine B photocatalyzed by Eu-doped CdS nanowires illuminated by visible radiation

CdS nanowires doped with different contents of Eu dopant were synthesized by solvothermal method. XRD, SEM, TEM and Raman analyses certified that the as-synthesized samples were hexagonal CdS uniform nanowires. The pure CdS nanowires were 1–3 ?μm long and 80 ?nm diameter with the 1st and 2nd order longitudinal phonon modes at 298 and 594 ?cm^?1. The 3% Eu-doped CdS wires were 800 ?nm–2.5 ?μm long and 75 ?nm diameter with the 1st and 2nd order longitudinal phonon modes at 296 and 593 ?cm^?1. CdS nanowires grew along the [001] direction due to the surface energy effect. The photocatalytic properties of CdS and Eu-doped CdS nanowires were investigated for the degradation of rhodamine B (RhB) illuminated by visible radiation. In this research, Eu dopant played the role in promoting the photocatalytic kinetics because Eu³⁺ ions act as an electron acceptor to promote charge separation and photocatalytic activity. Both ^●OH and ^●O₂^? were the main active radicals used to transform RhB molecules into CO₂, H₂O and other intermediates.