Onset of quark-hadron duality in pion electroproduction

A large data set of charged-pion (pi+/-) electroproduction from both hydrogen and deuterium targets has been obtained spanning the low-energy residual-mass region. These data conclusively show the onset of the quark-hadron duality phenomenon, as predicted for high-energy hadron electroproduction. We construct several ratios from these data to exhibit the relation of this phenomenon to the high-energy factorization ansatz of electron-quark scattering and subsequent quark-->pion production mechanisms.     

Fate of an accretion disc around a black hole when both the viscosity and dark energy is in effect

This paper deals with the viscous accretion flow of a modified Chaplygin gas towards a black hole as the central gravitating object. A modified Chaplygin gas is a particular type of dark energy model which mimics of radiation era to phantom era depending on the different values of its parameters. We compare the dark energy accretion with the flow of adiabatic gas. An accretion disc flowing around a black hole is an example of a transonic flow. To construct the model, we consider three components of the Navier–Stokes equation, the equation of continuity and the modified Chaplygin gas equation of state. As a transonic flow passes through the sonic point, the velocity gradient being apparently singular there, it gives rise to two flow branches: one in-falling, the accretion and the other outgoing, the wind. We show that the wind curve is stronger and the wind speed reaches that of light at a finite distance from the black hole when dark energy is considered. Besides, if we increase the viscosity, the accretion disc is shortened in radius. These two processes acting together make the system deviate much from the adiabatic accretion case. It shows a weakening process for the accretion procedure by the work of the viscous system influencing both the angular momentum transport and the repulsive force of the modified Chaplygin gas.     

Reverse self-assembly: (111)-oriented gold crystallization at alkylthiol monolayer templates

It has long been known that thiol-terminated molecules self-assemble as commensurate monolayers on Au(111) surfaces. By spreading floating octadecanethiol monolayers on aqueous solutions of chloroauric acid (HAuCl4) and using x rays to reduce the gold ions as well as to probe the structure, we have observed the nucleation of (111)-oriented Au nanoparticles at thiol surfaces. This process may be similar to the formation of biogenic gold by bacteria. The thiol monolayer acts as a "soft template," changing its structure as Au crystals form so that there is a sqrt[3]×sqrt[3] commensurate relationship.     

Rhodamine-Based Cu2+ -Selective Fluorosensor: Synthesis, Mechanism, and Application in Living Cells

A rhodamine B-based fluorescence probe (1) for the sensitive and selective detection of Cu²⁺ ion has been designed and synthesized using pyridine moiety. The optical properties of this compound have been investigated in acetonitrile-water binary solution (7:3 v/v). Compound 1 is found to be an excellent sensor for a biologically/physiologically very important transition metal ion (Cu²⁺) using only the two very different modes of measurements (absorption and emission); one case displayed intensity enhancement whereas in other case showed intensity depletion (quenching). A mechanistic investigation has been performed to explore the static nature of quenching process. The sensor has been found to be very effective in sensing Cu²⁺ ion inside living cells also.     

Microstructure and mechanical properties of nano-Y2O3 dispersed ferritic steel synthesized by mechanical alloying and consolidated by pulse plasma sintering

Ferritic steel with compositions 83.0Fe–13.5Cr–2.0Al–0.5Ti (alloy A), 79.0Fe–17.5Cr–2.0Al–0.5Ti (alloy B), 75.0Fe–21.5Cr–2.0Al–0.5Ti (alloy C) and 71.0Fe–25.5Cr–2.0Al–0.5Ti (alloy D) (all in wt%) each with a 1.0?wt% nano-Y₂O₃ dispersion were synthesized by mechanical alloying and consolidated by pulse plasma sintering at 600, 800 and 1000°C using a 75-MPa uniaxial pressure applied for 5?min and a 70-kA pulse current at 3?Hz pulse frequency. X-ray diffraction, scanning and transmission electron microscopy and energy disperse spectroscopy techniques have been used to characterize the microstructural and phase evolution of all the alloys at different stages of mechano-chemical synthesis and consolidation. Mechanical properties in terms of hardness, compressive strength, yield strength and Young's modulus were determined using a micro/nano-indenter and universal testing machine. All ferritic alloys recorded very high levels of compressive strength (850–2850?MPa), yield strength (500–1556?MPa), Young's modulus (175–250?GPa) and nanoindentation hardness (9.5–15.5?GPa), with up to 1–1.5 times greater strength than other oxide dispersion-strengthened ferritic steels (<1200?MPa). These extraordinary levels of mechanical properties can be attributed to the typical microstructure of uniform dispersion of 10–20-nm Y₂Ti₂O₇ or Y₂O₃ particles in a high-alloy ferritic matrix.     

In-situ and ex-situ study of crystallization behaviour of magnetron sputtered Ni63Zr37 amorphous thin film

ABSTRACT

The stages of crystallization of magnetron sputter-deposited Ni₆₃Zr₃₇ film with mostly amorphous structure have been investigated by differential scanning calorimetry (DSC) and in-situ annealing at 300°C by use of heating stage on a high-resolution transmission electron microscope (HRTEM). These results have been further confirmed by grazing incidence X-ray diffraction analyses of thin film specimens annealed ex-situ at 300°C for various durations. The temperature for crystallization found by DSC has been found to increase from 371°C to 434°C with an increase in heating rate from 3°C/min to 10°C/min, and the apparent activation energy for amorphous to crystalline transformation has been found as ～260.2?kJ/mol from the Kissinger plot. Studies on HRTEM using in-situ heating stage have shown the crystallization to occur on annealing at 300°C for ～10?min. Crystallization at a temperature lower than that found by DSC is attributed to structural relaxation with reduction of free volume due to thermal activation. It has been observed that Ni₃Zr forms first due to its large negative enthalpy of formation, and is followed by the formation of Ni-rich solid solution (Ni_ss) grains. HRTEM studies have shown grain rotation with the formation of partial dislocations at Ni₃Zr-Ni_ss interfaces as well as twinning followed by detwinning with dislocation formation in the Ni_ss matrix possibly to reduce the interfacial energy.     

Design of a highly sensitive photonic crystal waveguide platform for refractive index based biosensing

In this paper, a photonic crystal waveguide platform on silicon-on-insulator substrate is proposed in order to realize a highly sensitive refractive index based biosensor. Following the design, the analysis of the sensor structure are made by using the three dimensional Finite Difference Time Domain method. The principle of sensing is based on the change in refractive index, which in turn changes the output spectrum of the waveguide. Results show that the sensitivity of the sensor depends mainly on the geometrical properties of the defect region of the photonic crystal structure. The phenomenon is verified for various samples having refractive index ranging from 1 (air) to 1.57 (Bovine serum albumin). Further, the structure is compared with few other conventional photonic crystal waveguide designs to analyze the sensing performance. The estimated value of sensitivity of the sensor is found to be 260 nm/RIU with a detection limit of 0.001 RIU. This high sensitivity can enhance the performance of low-concentration analytes detection.