A Biomimetic Potentiometric Sensor Using Molecularly Imprinted Polymer for the Cetirizine Assay in Tablets and Biological Fluids

Despite the increasing number of applications of molecularly imprinted polymers (MIPs) in analytical chemistry, the construction of a biomimetic potentiometric sensor remains still challenging. In this work, a biomimetic potentiometric sensor, based on a non‐covalent imprinted polymer was fabricated for the recognition and determination of cetirizine. The MIP was synthesized by precipitation polymerization, using cetirizine dihydrochloride as a template molecule, methacrylic acid (MAA) as a functional monomer and ethylene glycol dimethacrylate (EGDMA) as a cross linking agent. The sensor showed high selectivity and a sensitive response to the template in aqueous system. The MIP‐modified electrode exhibited Nernstian response (28.0±0.9 mV/decade) in a wide concentration range of 1.0×10^?6 to 1.0×10^?2 M with a lower detection limit of 7.0×10^?7 M. The electrode has response time of ca. 20 s, high performance, high sensitivity, and good long term stability (more than 5 months). The method was satisfactory and used to the cetirizine assay in tablets and biological fluids.     

Impact of double cryogelation process on a macroporous dye-affinity hydrogel

Cryogels with interconnected channels allow high flow-through properties and mass transfer when dealing with complex mixtures such as non-clarified crude extracts. However, their mechanical strength can be challenged due to a large void volume inside the polymeric network. We have addressed this problem by forming a double-layer cryogel applied as a dye-affinity chromatography gel. In this study, poly(acrylamide-co-allyl glycidyl ether) cryogel was prepared at sub-zero temperature. The second layer was then prepared inside the primary cryogel under the same conditions to form a double-layer network. Cibacron Blue F3GA, a dye molecule, was immobilized on the surface of the cryogels. Bovine serum albumin was used as a model molecule to study the adsorption/elution procedure in batch and continuous modes. The maximum batch binding capacity and the dynamic binding capacity for the single-layer cryogel were 18 and 0.11, and for the double-layer cryogel were 7.5 and 0.9 mg/g of gel, respectively. However, the mechanical stability of the double-layer cryogel increased 7-fold (144 kPa). It was found that the kinetic and adsorption isotherms follow pseudo-second-order and Freundlich models, respectively. The regeneration of the columns after adsorption/elution cycles was evaluated, and no significant loss of capacity was observed after 10 cycles.     

Novel aqueous spongy foams made of three-dimensionally dispersed wood-fiber: entrapment and stabilization with NFC/MFC within capillary foams

This article describes the preparation of novel aqueous spongy foams that are composed of three-dimensionally distributed wood-fiber networks stabilized with nanofibrillate cellulose (NFC) and/or microfibrillated cellulose (MFC). The free standing aqueous spongy foams were prepared with the entrapment of NFC and/or MFC—stabilized air-in-water (A/W) capillary foams using “gel trapping technique”. The stability of spongy foams could be controlled by manipulating the volume fraction of NFC and/or MFC and a secondary liquid immiscible with the continuous phase of the NFC and/or MFC suspension. Possible morphology and mechanical distribution of NFC and/or MFC within spongy foams were verified with optical microscope, SEM, and functional load-bearing method. Owing to three-dimensionally dispersed wood-fiber structure, ultra-lightweight (0.01–0.06 g/cm³), high porosity (>90%), and microporous (10–80 μm), the NFC and/or MFC reinforced spongy foams, improved compressional strength-vertical direction obviously, from 0.0 to more than 13.78 kPa.     

Improved molecular weight control in ring‐opening metathesis polymerization reactions in organic and aqueous media using N‐heterocyclic carbene–ruthenium arene/alkyne catalyst systems

A binary catalytic system, RuCl₂(N‐heterocyclic carbene)(p‐cymene)/alkyne, was developed for improved molecular weight control in ring‐opening metathesis polymerization (ROMP) reactions of norbornene derivatives in organic and aqueous media. Monometallic ruthenium arene compounds were activated using aryl and aliphatic terminal alkynes to form highly active metathesis species. The effects of alkyne structure and concentration on the overall catalytic activity were systematically investigated. The catalytic activity of the metathesis active species can be tuned by varying alkyne substituents. Also, the initiation rate of the ROMP reaction can be tuned by increasing the alkyne‐to‐Ru ratio. ROMP polymers with a wide range of molecular weights (91–832 kDa) were isolated in organic media, whereas polymers with a molecular weight range of 110–280 kDa with average particle sizes of 150–250 nm were isolated in aqueous media. Copyright © 2016 John Wiley & Sons, Ltd.     

Eco‐friendly synthesis of benzoxazepine and malonamide derivatives in aqueous media

A special, efficient and reusable heterogeneous catalytic system is reported for the one‐pot three‐component synthesis of a series of malonamide and 2,3,4,5‐tetrahydrobenzo[b][1,4]oxazepine derivatives in the presence of a heterogeneous material composed of MCM‐48/H₅PW₁₀V₂O₄₀ in aqueous media and at room temperature. The products were identified using physical data (melting points) by comparison with those reported in the literature. Also, the structures of the new compounds were characterized by means of infrared, ¹H NMR, ¹³C NMR and CHN analyses. Copyright © 2016 John Wiley & Sons, Ltd.     

New approaches to characterize polymeric oil additives in solution based on pyrene excimer fluorescence

Maleated polyolefins (MaPOs) such as maleated ethylene propylene copolymers or polyisobutylene terminated at one end with a succininic anhydride can be used as polymeric dispersants in engine oils after reaction with polyamines while unmodified EP copolymers improve the viscosity index of oils. MaPOs can also be labeled with pyrene derivatives to generate pyrene‐labeled polyolefins (PyLPOs) as fluorescent mimics of oil additives and pyrene excimer fluorescence (PEF) can be applied to probe their behavior in solution. This review describes new methodology that was recently implemented to characterize the complex fluorescence signal emitted by PyLPOs by using steady‐state and time‐resolved fluorescence. This methodology enables one to gain quantitative information about the level of clustering of the succinic pendants along a maleated polyolefins and intra‐ and intermolecular aggregation of polyolefins in solution. Such information is relevant to scientists aiming to characterize polymeric oil additives used in engine oil. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 7–18     

Acceleration of osteogenic differentiation by sustained release of BMP2 in PLLA/graphene oxide nanofibrous scaffold

After about three decades of experience, tissue engineering has become one of the most important approaches in reconstructive medical research to treat non‐self‐healing bone injuries and lesions. Herein, nanofibrous composite scaffolds fabricated by electrospinning, which containing of poly(L‐lactic acid) (PLLA), graphene oxide (GO), and bone morphogenetic protein 2 (BMP2) for bone tissue engineering applications. After structural evaluations, adipose tissue derived mesenchymal stem cells (AT‐MSCs) were applied to monitor scaffold's biological behavior and osteoinductivity properties. All fabricated scaffolds had nanofibrous structure with interconnected pores, bead free, and well mechanical properties. But the best biological behavior including cell attachment, protein adsorption, and support cells proliferation was detected by PLLA‐GO‐BMP2 nanofibrous scaffold compared to the PLLA and PLLA‐GO. Moreover, detected ALP activity, calcium content and expression level of bone‐related gene markers in AT‐MSCs grown on PLLA‐GO‐BMP2 nanofibrous scaffold was also significantly promoted in compression with the cells grown on other scaffolds. In fact, the simultaneous presence of two factors, GO and BMP2, in the PLLA nanofibrous scaffold structure has a synergistic effect and therefore has a promising potential for tissue engineering applications in the repair of bone lesions.     

Electrochemically reduced tungsten‐based active species as catalysts for metathesis‐related reactions: ring‐opening metathesis copolymerization of cyclopentene with cyclooctene

The ring‐opened metathesis copolymerization of cyclopentene with cyclooctene by an electrochemically generated WCl₆‐based catalyst has been prepared and ¹³C NMR spectroscopy used to analyse in detail the nature of the homo‐ and hetero‐dyad units. This copolymer was characterized by gel‐permeation chromatography (M_n = 12 900, PDI= 2.2) and differential scanning calorimetry analysis. The glass‐transition temperature T_g of the copolymer was ?18.7 °C. Homopolymerization of cyclopentene is also reported to compare with copolymers produced in this work. Copyright © 2005 John Wiley & Sons, Ltd.