Microwave digestion of fish tissue for selenium determination by differential pulse polarography

In KIO(3)NH(3)NH(4)Cl medium, the selenium complex Se(O)SO(2-)(3), resulted from the reaction of selenite and sulphite in acid solution, gave a catalytic wave, which was applied to the determination of selenium in fish by differential pulse polarography. The sample was decomposed using the HNO(3)/H(2)SO(4)/H(2)O(2) digestion mixture in a closed PTFE digestion vessel with microwave heating. The detection limit was 0.06 mug/dm(3). The calibration curve was linear up to 8 mug/dm(3). Selenate present was reduced with hot hydrochloric acid to selenite. The recoveries of the selenite and selenate in two spiked samples investigated ranged from 91 to 104%. The NIES CRM No. 6 mussel was analyzed and the results obtained agreed well with the reference value (reference value: 1.5 mug/g; found: 1.43 +/- 0.05 mug/g). The results obtained by differential pulse polarography were in good agreement with those found by hydride generation atomic absorption spectrometry.     

Facile synthesis of TiO2 inverse opal electrodes for dye-sensitized solar cells

Engineering of TiO(2) electrode layers is critical to guaranteeing the photoconversion efficiency of dye-sensitized solar cells (DSSCs). Recently, a novel approach has been introduced for producing TiO(2) electrodes using the inverted structures of colloidal crystals. This paper describes a facile route to producing ordered macroporous electrodes from colloidal crystal templates for DSSCs. Using concentrated colloids dispersed in a volatile medium, the colloidal crystal templates were obtained within a few minutes, and the thickness of the template was easily controlled by changing the quantity of colloidal solution deposited. Here, the effects of the structural properties of the inverse opal TiO(2) electrodes on the photovoltaic parameters of DSSCs were investigated. The photovoltaic parameters were measured as a function of pore ordering and electrode film thickness. Moreover, DSSC applications that used either liquid or viscous polymer electrolyte solutions were investigated to reveal the effects of pore size on performance of an inverse opal TiO(2) electrode.     

Solid-phase synthesis of enantio-controlled lactic acid oligomers

A synthetic method for lactic acid oligomers via solid-phase synthesis under mild reaction conditions with up to 99% yield is presented. The fine control of the chirality on each lactic acid unit of the oligomers was easily achieved by the substitution of (R)-THP-protected lactic acid (R)-2 by (S)-2 without alternating the procedure. The overall synthesis of the trimer and tetramer was completed in one and two days, respectively. Intramolecular cyclizations of enantio-controlled lactic acids were also attempted through the Yamaguchi macrolactonization or the Mitsunobu reaction. However, we were unable to isolate single cyclic oligomers but always obtained a mixture of cyclic oligomers.     

Organo‐ and Hydrogelators Based on Luminescent Monocationic Terpyridyl Platinum(II) Complexes with Biphenylacetylide Ligands

A series of phosphorescent terpyridyl platinum(II) complexes with ancillary biphenylacetylide ligands, namely, [(R₃tpy)PtC≡C(biphenyl)]X (R=tBu, H, or Et₂N; tpy=2,2′;6′,2′′‐terpyridyl; X is an anion) were synthesized and structurally characterized by various spectroscopic techniques and X‐ray diffraction methods. Despite a lack of long alkyl chain(s) or hydrogen‐bonding motif(s), complexes [(tpy)PtC≡C(biphenyl)]Cl and [(tBu₃tpy)PtC≡C(biphenyl)]X (X=Cl, ClO₄, PF₆, or BF₄) were found to gelate water and organic solvents, respectively. The self‐aggregation of these complexes in solutions and the resulting gels were investigated with variable‐temperature (VT) ¹H NMR spectroscopy, polarized optical microscopy, and absorption/emission spectroscopy. SEM micrographs on dry gels revealed entangled nanofibers with diameters of 20–40 nm and lengths of tens of micrometers. Powder X‐ray diffraction (PXRD) study revealed various degrees of crystallinity of these fibrillar nanostructures. The substituents on both the terpyridyl and acetylide ligands and counterion of these complexes play a profound but concerted role in tuning the intermolecular metal???metal and/or π–π interactions, and hence the gelation properties.     

Bis(5,7‐dimethyl‐8‐hydroxyquinolinato)platinum(II) Complex for Efficient Organic Heterojunction Solar Cells

Organic photovoltaic (OPV) cells using metal(II) (Pt, Pd, Cu, and Ni) chelates of 8‐hydroxyquinoline (Hq) or 5,7‐dimethyl‐8‐hydroxy‐quinoline (HMe₂q) as an electron donor were fabricated by vacuum deposition. The bis(5,7‐dimethyl‐8‐hydroxyquinolinato)platinum(II) [Pt(Me₂q)₂]‐based OPVs showed the best performance with an open voltage (V_OC) of 0.42 V, a short circuit current density (J_SC) of 14.8 mA cm^?2, and a maximum power conversion efficiency (η_P) of 2.4 %. The X‐ray single‐crystal structures together with the grazing incidence X‐ray diffraction (GIXRD) data of thin film samples reveal that the peripheral methyl substituent(s) and platinum(II) ion are essential for the high degree of film crystallinity resulting in improved performance of the as‐fabricated field‐effect transistors (FETs) and OPV cells.     

Common variants at the promoter region of the APOM confer a risk of rheumatoid arthritis

Although the genetic component in the etiology of rheumatoid arthritis (RA) has been consistently suggested, many novel genetic loci remain to uncover. To identify RA risk loci, we performed a genome-wide association study (GWAS) with 100 RA cases and 600 controls using Affymetrix SNP array 5.0. The candidate risk locus (APOM gene) was re-sequenced to discover novel promoter and coding variants in a group of the subjects. Replication was performed with the independent case-control set comprising of 578 RAs and 711 controls. Through GWAS, we identified a novel SNP associated with RA at the APOM gene in the MHC class III region on 6p21.33 (rs805297, odds ratio (OR) = 2.28, P = 5.20 × 10-7). Three more polymorphisms were identified at the promoter region of the APOM by the re-sequencing. For the replication, we genotyped the four SNP loci in the independent case-control set. The association of rs805297 identified by GWAS was successfully replicated (OR = 1.40, P = 6.65 × 10-5). The association became more significant in the combined analysis of discovery and replication sets (OR = 1.56, P = 2.73 × 10-10). The individuals with the rs805297 risk allele (A) at the promoter region showed a significantly lower level of APOM expression compared with those with the protective allele (C) homozygote. In the logistic regressions by the phenotype status, the homozygote risk genotype (A/A) consistently showed higher ORs than the heterozygote one (A/C) for the phenotype-positive RAs. These results indicate that APOM promoter polymorphisms are significantly associated with the susceptibility to RA.     

Benzofurans and sterol from the seeds of <Emphasis Type="Italic">styrax obassia</Emphasis>

Two benzofurans (1, 2) along with five known compounds (3.7) were isolated from the seeds of S. obassia. Their structures were elucidated as methyl 3-[7-methoxy-2-(3′,4′-methylenedioxyphenyl)-5-benzofuranyl]-propionate (1), methyl 3-[2-(3′,4′-methylenedioxyphenyl)-5-benzofuranyl]-propionate (2), egonol (3), egonolacetate (4), egonol-2-methylbutanoate (5), 7-demethoxyegonol-2-methylbutanoate (6), and stigmasterol (7) on the basis of their comprehensive spectroscopic analysis including 2D NMR data. Compounds 1, 2 are obtained for the first time from nature, while this is the first record of compound 7 from the Styrax species. Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 350-353, July-August, 2008. Original article submitted May 4, 2007.     

Determination of metabolites in Uncaria sinensis by HPLC and GC-MS after green solvent microwave-assisted extraction

Uncaria sinensis (Oliv.) Havil (Rubiaceae) has been used as an important Traditional Chinese Medicine (TCM) herb for the treatment of fevers and various nervous disorders. The major bioactive secondary metabolites from different classes of chemical compounds, i.e. organic acid, flavonoid and alkaloid, present in this TCM herb, namely catechin, caffeic acid, epicatechin and rhynchophylline, were extracted by microwave-assisted extraction (MAE) method with ultra-pure water as the extraction solvent. The optimal extraction conditions for this green solvent MAE method were found to be 100 °C for 20 min. The recoveries of the compounds were found to be comparable to that of heating under reflux using ultra-pure water for 60 min. The method precision (RSD, n = 6) was found to vary from 0.19% to 5.60% for the proposed method on different days for the secondary metabolites. Simultaneously, the key primary metabolites such as sucrose and phenylalanine for the biosynthesis of bioactive secondary metabolites were successfully characterized by GC-MS. Furthermore, an approach using the combination of primary and secondary metabolite profiling based on their chemical fingerprints with Principal Component Analysis (PCA) was successfully developed to evaluate the quality of U. sinensis obtained from different sources. This approach was shown to be feasible in discriminating U. sinensis from different origins and thus a potential application for the quality control of other medicinal herbs.     

A Dynamic Model for Cellulosic Biomass Hydrolysis: a Comprehensive Analysis and Validation of Hydrolysis and Product Inhibition Mechanisms

The objective of this study is to perform a comprehensive enzyme kinetics analysis in view of validating and consolidating a semimechanistic kinetic model consisting of homogeneous and heterogeneous reactions for enzymatic hydrolysis of lignocellulosic biomass proposed by the U.S. National Renewable Energy Laboratory (Kadam et al., Biotechnol Prog 20(3):698–705, 2004) and its variations proposed in this work. A number of dedicated experiments were carried out under a range of initial conditions (Avicel® versus pretreated barley straw as substrate, different enzyme loadings and different product inhibitors such as glucose, cellobiose and xylose) to test the hydrolysis and product inhibition mechanisms of the model. A nonlinear least squares method was used to identify the model and estimate kinetic parameters based on the experimental data. The suitable mathematical model for industrial application was selected among the proposed models based on statistical information (weighted sum of square errors). The analysis showed that transglycosylation plays a key role at high glucose levels. It also showed that the values of parameters depend on the selected experimental data used for parameter estimation. Therefore, the parameter values are not universal and should be used with caution. The model proposed by Kadam et al. (Biotechnol Prog 20(3):698–705, 2004) failed to predict the hydrolysis phenomena at high glucose levels, but when combined with transglycosylation reaction(s), the prediction of cellulose hydrolysis behaviour over a broad range of substrate concentrations (50–150 g/L) and enzyme loadings (15.8–31.6 and 1–5.9 mg protein/g cellulose for Celluclast and Novozyme 188, respectively) was possible. This is the first study introducing transglycosylation into the semimechanistic model. As long as these type of models are used within the boundary of their validity (substrate type, enzyme source and substrate concentration), they can support process design and technology improvement efforts at pilot and full-scale studies.