Effect of γ-radiation on ointment cold cream

In this paper, Co-60γ ray was used to irradiate the ointment cold cream at room temperature (25°C). We also used FTIR, GC and thin film chromatogram to analyse various irradiated samples. It was found that the ointment cold cream can be irradiated at dose of 5–35 kGy and at dose rate from 0.2 to 0.6 kGy/h at room temperature (25°C) without evident decomposition. At dose of 5–15 kGy, the number of bacteria can be reduced to hygienic standard value. The radiation sterilization is a safe method for killing the bacteria in the ointment cold cream.     

Rapid determination of underivatized pyroglutamic acid, glutamic acid, glutamine and other relevant amino acids in fermentation media by LC-MS-MS

Determination of amino acids in a complex matrix without derivatization is advantageous, however, difficulties are found in both the detection and the separation of those compounds. In this study, a rapid and reliable LC-MS-MS method for the quantitation of underivatized amino acids in exocellular media was established. Injections were made directly after centrifugation of the samples, without further preparation. The separation of seven underivatized amino acids was achieved on a reversed-phase C18 column with pentadecafluorooctanoic acid as a volatile ion-pair reagent, and the specific detection of most amino acids was achieved by MS-MS of the specific transitions [M + H]+-->[M + H - 46]+. The calibration curves of all analytes were linear over the range of 1.0-1000 microg ml(-1) and the detection limits ranged from 0.1 to 5 ng ml(-1), with an injection volume of 20 microl. The inter-day and intra-day precisions ranged from 2.6 to 5.7% and 4.8 to 8.2%, respectively; the mean recoveries of the seven analytes were 81-104%, 91-107% and 93-101% respectively at the spiked level of 10, 40 and 200 microg ml(-1). A large number of fermentation samples were analysed using this method. The technique is simple, rapid, selective and sensitive, and shows potential for the high-throughput quantitation of amino acids from other biological matrices.     

Theoretical studies on the influence of molecular interactions on the mechanism of electron transfer in photosynthetic reaction center ofRps. viridis

Based on the QM/MM optimized X-ray crystal structure of the photosynthetic reaction center (PRC) of purple bacteriaRhodopseudomonas (Rps.)viridis, quantum chemistry density functional method (DFT, B3LYP/6-31G) has been performed to study the interactions between the pigment molecules and either the surrounded amino acid residues or water molecules that are either axially coordinated or hydrogen bonded with the pigment molecules, leading to an explanation of the mechanism of the primary electron-transfer (ET) reactions in the PRC. Results show that the axial coordination of amino acid residues greatly raises theE _LUMO of pigment molecules and it is important for the possibility of ET to take place. Different hydrogen bonds between amino acid residues, water molecules and pigment molecules decrease theE _LUMO of the pigment molecules to different extents. It is crucial for the ET taking place from excited P along L branch and sustains that the ET is a one-step reaction without through accessory bacteriochlorophyll (ABChl b). It is insufficient to treat the whole protein surrounding as a homogeneous dielectric medium.     

Cross-coupling reactions of phenylmagnesium halides with fluoroazines and fluorodiazines

The first nickel-catalyzed cross-coupling reactions between fluoroarenes and aryl organometallics using commercially available ligands are described. The nickel-catalyzed cross-coupling reactions between aryl Grignard reagents and fluoroazines and -diazines occurred in THF at room temperature using commercially available 1,2-bis(diphenylphosphino)ethane, 1,3-bis(diphenylphosphino)propane, or 1,1'-bis(diphenylphosphino)ferrocene as ligand. Various fluoro substrates such as pyridines, diazines (pyrazine, pyridazine), benzodiazines (quinoxaline), and quinolines were successfully involved in the reaction with phenylmagnesium halides (phenylmagnesium chloride, 2-methoxyphenylmagnesium bromide, and 4-methoxyphenylmagnesium bromide). The conditions used also allowed the cross-coupling of 4-fluorotoluene with arylmagnesium reagents.     

Two N,N′‐diaryl‐2,2,2‐trichloroethane‐1,1‐diamines: hydrogen‐bonded supramolecular structures in one and two dimensions

The molecules of 2,2,2‐trichloro‐N,N′‐diphenylethane‐1,1‐diamine, C₁₄H₁₃Cl₃N₂, are linked into (040) sheets by a combination of C—H...Cl and C—H...π(arene) hydrogen bonds. In 2,2,2‐trichloro‐N,N′‐bis(4‐methylphenyl)ethane‐1,1‐diamine, C₁₆H₁₇Cl₃N₂, the molecules are linked into C(7) chains by two independent C—H...Cl hydrogen bonds and one Cl...Cl contact.     

“受阻路易斯酸碱对”催化的2,3-二取代2H-1,4-苯并噁嗪氢化反应机理研究

在受阻路易斯酸碱对（FLPs）催化的2，3-二取代2H-1，4-苯并噁嗪氢化反应中，3号位取代基不同会导致反应效率极大改变，因此我们选取反应活性具有较大差别的三种底物作为模型化合物对其反应机理进行了研究，建立了氢化反应势能面.发现当B（C₆F₅）₃与2，3-二苯基2H-1，4-苯并噁嗪或2-甲基-3-苯基2H-1，4-苯并噁嗪混合后，会形成FLPs与路易斯酸碱加合物的混合物.而将B（C₆F₅）₃与2，3-二甲基2H-1，4-苯并噁嗪混合后主要形成没有催化活性的路易斯酸碱加合物，因其能量低于FLPs，在催化体系中不容易转化为FLPs，这导致三种模型化合物在FLPs催化的氢化反应中效率不同.进一步的取代基电子效应及位阻效应计算表明：B（C₆F₅）₃与2-甲基-3-取代2H-1，4-苯并噁嗪混合后形成的路易斯酸碱加合物和FLPs化合物之间稳定性差别源于3位取代基空间位阻不同.     

Synthesis and Rearrangement of P‐Nitroxyl‐Substituted PIII and PV Phosphanes: A Combined Experimental and Theoretical Case Study

Low‐temperature generation of P‐nitroxyl phosphane 2 (Ph₂POTEMP), which was obtained by the reaction of Ph₂PH ( 1 ) with two equivalents of TEMPO, is presented. Upon warming, phosphane 2 decomposed to give P‐nitroxyl phosphane P‐oxide 3 (Ph₂P(O)OTEMP) as one of the final products. This facile synthetic protocol also enabled access to P‐sulfide and P‐borane derivatives 7 and 13 , respectively, by using Ph₂P(S)H ( 6 ) or Ph₂P(BH₃)H ( 11 ) and TEMPO. Phosphane sulfide 7 revealed a rearrangement to phosphane oxide 8 (Ph₂P(O)STEMP) in CDCl₃ at ambient temperature, whereas in THF, thermal decomposition of sulfide 7 yielded salt 10 ([TEMP‐H₂][Ph₂P(S)O]). As well as EPR and detailed NMR kinetic studies, indepth theoretical studies provided an insight into the reaction pathways and spin‐density distributions of the reactive intermediates.     

Simulation of Three-Spin Interaction in Coupled Cavities Chain

We generalize usual second-order effective Hamiltonian approximation into third-order. Employing the generalized method, we propose a scheme to generate three-spin interaction using coupled cavity chain. We show that the third order term not only improves two parties interaction but also induces direct three-spin interaction which has not been simulated before. By controlling the frequency of laser field, one can obtain next nearest neighbor interaction on the same order with the nearest neighbor’s or the three-spin interaction on the same order as next nearest neighbor’s.     

Spatial donor/acceptor architecture for intramolecular charge-transfer emitter

Charge transfer via electron hopping from an electron donor (D) to an acceptor (A) in nanoscale, plays a crucial role in optoelectronic materials, such as organic light-emitting diodes (OLEDs) and organic photovoltaic cells (OPVs). Here, we propose a strategy for binding D/A units in space, where intramolecular charge-transfer can take place. The resulted material DM-Me-B is able to give bright emission in this molecular architecture because of the good control of D/A interaction and conformational rigidity. Moreover, DM-Me-B presents small singlet-triplet splitting energy, enabling thermally activated delayed fluorescence. Therefore, the DM-Me-B exhibits ～20% maximum external quantum efficiency and low efficiency roll-off at 1000 cd/m², certifying an effective strategy in controlling D/A blocks through space.