Laser-induced damage of high reflectors for Ti:sapphire laser system

A broadband (～ 176 nm, R ＞ 98%, λ0 = 800 nm) and high laser-induced damage threshold (LIDT =2.4 J/cm2) TiO2/HfO2/SiO2 high reflector (HR) for Ti:sapphire chirped-pulse amplification (CPA) laser system is fabricated by the electron beam evaporation. The refractive index and extinction coefficient of TiO2 and HfO2 films are calculated from single-layer films' transmittance spectra. The properties of HR are mainly determined by the high refractive index material. The high refractive index leads to wide bandwidth. A low extinction coefficient indicates low absorption and high LIDT. The possible damage mechanism of HR is discussed.     

3D photon counting imaging at 1550 nm with 1.5-GHz sine-wave-gated InGaAs/InP GAPD

We demonstrated a 3D laser imaging system at 1550 nm with a 1.5-GHz sine-wave gated Geiger-mode InGaAs/InP avalanche photodiode (APD). An optical fiber bundle with 100 individual fiber outputs was implemented at the focal plane of the telescope, providing a 2.5-mrad imaging view. The system used single-pixel near-infrared single-photon detector to measure photons at fiber outputs instead of a photon counting array. The 1.5-GHz gated Geiger-mode InGaAs/InP APD with a timing jitter of 290 ps was operated in quasi-continuous mode with detection efficiency of ∼4.3%. We achieved higher than 6-cm surface-to-surface resolution at single-photon level, showing a potential of low-energy and eye-safe laser imaging system for long-distance measurements.     

换个角度看近地人造卫星的运动

将卫星的近地轨道运动等效为无阻力条件下物体沿地球内两相互垂直的直径轨道的简谐振动的合运动,从而解释了它们的运动周期相同这一事实.     

Optimized growth and dielectric properties of barium titanate thin films on polycrystalline Ni foils

Barium titanate(BTO) thin films were deposited on polycrystalline Ni foils by using the polymer assisted deposition(PAD) technique.The growth conditions including ambient and annealing temperatures were carefully optimized based on thermal dynamic analysis to control the oxidation processing and interdiffusion.Crystal structures,surface morphologies,and dielectric performance were examined and compared for BTO thin films annealed under different temperatures.Correlations between the fabrication conditions,microstructures,and dielectric properties were discussed.BTO thin films fabricated under the optimized conditions show good crystalline structure and promising dielectric properties with εr～ 400 and tan δ < 0.025 at 100 kHz.The data demonstrate that BTO films grown on polycrystalline Ni substrates by PAD are promising in device applications.     

Measurements of NO2 mixing ratios with topographic target light scattering-differential optical absorption spectroscopy system and comparisons to point monitoring technique

A topographic target light scattering-differential optical absorption spectroscopy(ToTaL-DOAS) system is developed for measuring average concentrations along a known optical path and studying surface-near distributions of atmospheric trace gases.The telescope of the ToTaL-DOAS system points to targets which are located at known distances from the measurement device and illuminated by sunlight.Average concentrations with high spatial resolution can be retrieved by receiving sunlight reflected from the targets.A filed measurement of NO2 concentration is performed with the ToTaL-DOAS system in Shijiazhuang in the autumn of 2011.The measurement data are compared with concentrations measured by the point monitoring technique at the same site.The results show that the ToTaL-DOAS system is sensitive to the variation of NO2 concentrations along the optical path.     

Three-dimensional ghost imaging based on periodic diffraction correlation imaging

We experimentally demonstrate a three-dimensional （3D） ghost imaging method based on period diffraction correlation imaging. Compared with conventional ghost imaging, our method can easily retrieve the images of different focal planes. Due to the correlation between the disturbed object beam and the reference beams which do not pass through any scattering, the clear images can be periodically obtained in the uncovered zones even through a scattering medium. The analysis of the 3D imaging resolution reveals that the proper resolution for actual demand can be achieved by designing our devices. The implementation of this experiment is quite simple and low-cost. It facilitates the practical applications of ghost imaging.     

A tunable infrared plasmonic polarization filter with asymmetrical cross resonator

A tunable infrared plasmonic polarization filter is proposed and investigated in this paper. The filter is based on the sandwich absorption structure which consists of three layers. The top layer is an array of asymmetrical cross resonator.The middle and bottom layers are dielectric spacer and metal film respectively. By absorbing specific wavelength of the incident light perfectly, the reflection spectrum of the structure shows filter performance. The calculated results show that the absorption wavelength is strongly dependent on the length of branch of the asymmetrical cross resonator which is parallel to the light polarization and independent of the length of the vertical one. Therefore, the asymmetrical cross resonator filter structure opens the way for freely tuning the filtering wavelength for a different light polarization. We can fix a resonant wavelength(absorption wavelength) corresponding to one polarization and change the resonant wavelength for the other polarization by adjusting the corresponding branch length of the asymmetrical cross resonator, or change the two resonant wavelengths of both two polarizations at the same time.     

Influence of laser power density on damage of comb by photodynamic therapy—simulation and validation of mathematical models

Photodynamic therapy （PDT） has poor therapeutic outcomes for the treatment of port-wine stain （PWS） lesions with long drug-light intervals （DLIs）. This letter investigates the possibility of improving the treatment efficacy through increasing the laser power density using a computer simulation and a cock comb model. The computational model includes a Monte Carlo simulation for the laser distribution and a calculation of the singlet oxygen concentrations （102）. Both simulation and experimental results show that increasing the power density from i00 to 140 mW/cm^2 not only improves the PDT efficacy, but also results in the unwanted skin damage.     

对数似然图像分割的快速主动轮廓跟踪算法

针对跟踪目标尺度变化问题,提出了基于灰度对数似然图像分割的快速主动轮廓跟踪算法。改进的主动轮廓跟踪算法将根据以目标与背景的颜色差异而建立的对数似然图对图像进行阈值分割和数学形态学处理,再将Kalman滤波器结合到主动轮廓跟踪算法进行目标跟踪。改进的主动轮廓跟踪算法对目标分割准确,轮廓特征显著,跟踪效果稳定,算法能很好地适应跟踪目标尺度变化。通过Kalman滤波器对目标位置点的预测减少了主动轮廓跟踪算法收敛的迭代次数,使算法的运算效率提高了33%左右。     

Improving histogram-based image contrast enhancement using gray-level information histogram with application to X-ray images

Many applications of histogram-based techniques for the purposes of image enhancement are well known. However, these techniques often fail to produce satisfactory results for a broad variety of low-contrast images (e.g., X-ray images). In this paper, we propose a new form of histogram for image contrast enhancement. The input image is first divided into several equal-sized regions according to the intensities of gradients, their corresponding statistical values of gray levels are then modified respectively, and finally the processed histogram for the whole image is obtained by the summation of all the weighted values of regions. The fundamental characteristic of this new form of histogram is that the amplitudes of its components can objectively reflect the contribution of the gray levels to the representation of image information. Accordingly, this new histogram is called gray-level information histogram. The performance of many histogram-based enhancement techniques might be improved dramatically using the proposed histogram. Testing on the X-ray images validates the effectiveness of the new histogram.