HPLC separation of hydrogenated derivatives of buckminsterfullerene

Summary The effect of composition and flow rate of the mobile phase on the HPLC separation of hydrogenated buckminsterfullerene (C₆₀H_n n=2–38) was investigated on BuckySep column. Toluene was used as the basic solvent and hexane, heptane, cyclohexane, THF, acetonitrile, acetone, ethanol and 2-propanol as co-solvents. The fraction of co-solvents was varied 10–80%, and the flow rate 1–0.1 mL min⁻¹. Toluene-acetonitrile 65∶35 and toluene-acetone 50∶50 provided the best separation. Under the best conditions complete separation of C₆₀H₂ and almost complete separation of the four most abundant isomers of C₆₀H₄ were achieved. Separation of derivatives with higher hydrogen content was very poor. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997     

Beyond generative models: superfast traversal,optimization, novelty,exploration and discovery (STONED) algorithm for molecules using SELFIES

Inverse design allows the generation of molecules with desirable physical quantities using property optimization. Deep generative models have recently been applied to tackle inverse design, as they possess the ability to optimize molecular properties directly through structure modification using gradients. While the ability to carry out direct property optimizations is promising, the use of generative deep learning models to solve practical problems requires large amounts of data and is very time-consuming. In this work, we propose STONED – a simple and efficient algorithm to perform interpolation and exploration in the chemical space, comparable to deep generative models. STONED bypasses the need for large amounts of data and training times by using string modifications in the SELFIES molecular representation. First, we achieve non-trivial performance on typical benchmarks for generative models without any training. Additionally, we demonstrate applications in high-throughput virtual screening for the design of drugs, photovoltaics, and the construction of chemical paths, allowing for both property and structure-based interpolation in the chemical space. Overall, we anticipate our results to be a stepping stone for developing more sophisticated inverse design models and benchmarking tools, ultimately helping generative models achieve wider adoption.

Interpolation and exploration within the chemical space for inverse design.     

Acyclic Schiff base salts derived from 1,3‐diaminopropane and 1,3‐diamino‐2‐hydroxypropane

Two salts of acyclic Schiff base cationic ligands, namely N,N′‐bis(2‐nitrobenzyl)propane‐1,3‐diammonium dichloride monohydrate, C₁₇H₂₂N₄O₄²⁺·2Cl⁻·H₂O, (I), and 2‐hydroxy‐N,N′‐bis(2‐nitrobenzyl)propane‐1,3‐diammonium dichloride, C₁₇H₂₂N₄O₅²⁺·2Cl⁻, (II), were synthesized as precursors in order to obtain new acyclic and macrocyclic multidentate ligands and complexes. The cation conformations in compounds (I) and (II) are different in the solid state, although the cations are closely related chemically. Similarly, the hydrogen‐bonding networks involving ammonium cations, hydroxyl groups and chloride anions are also different. In the cation of compound (II), the hydroxyl group is disordered over two sets of sites, with occupancies of 0.785 (8) and 0.215 (8).     

Anomalous NMR behavior of meso compounds with remote stereogenic centers on addition of chiral shift reagent or chiral solvating agent

A problem has arisen in using chiral shift reagents (CSR) and chiral solvating agents (CSA) to determine meso and racemic forms of diastereoisomers in which the stereogenic centers of the molecules are separated by achiral spacers. It is found that NMR signals of both meso and racemic forms of diastereoisomers may exhibit doubling on addition of CSR/CSA, which means that unequivocal assignments cannot be made without characterizing the effects for separate meso and racemic forms; this is particularly important for additions of CSR/CSA at relatively low concentrations, which always result in the splitting of some NMR signals of diastereoisomers. The phenomenon is demonstrated in the (31)P NMR spectra of meso and racemic forms of three spermine-bridged gem-disubstituted cyclotriphosphazatrienes, 1a-c, and compared with analogous achiral molecules, the per-substituted spermine-bridged cyclotriphosphazatrienes 2a-d. As expected, only one set of (31)P NMR signals was observed for the achiral compounds 2a-d, even on addition of CSA. Two sets of (31)P NMR ABX multiplets corresponding to meso and racemic diastereoisomers were observed for compounds 1a-c; on addition of CSA, the signals of at least one of the multiplets for each compound separated into more than the expected groups of three lines with an intensity distribution of 2:1:1. To understand this phenomenon, the meso and racemic forms of 1a and 1b and the meso form of 1c have been separated and characterized by X-ray crystallography. On addition of CSA to the racemic forms of 1a and 1b, the (31)P NMR spectrum shows the expected doubling of signals, but, unexpectedly, the same is observed for each of the meso forms of 1a-c. Analogous results using both CSA and CSR have been obtained for the meso and racemic forms of the diastereoisomeric piperazine-bridged macrocyclic-phosphazene compound, 3, whereas no effect was observed for the two meso forms of the doubly bridged macrocyclic-phosphazene compound 4. The phenomenon of doubling of the (31)P NMR signals of the meso form of singly bridged cyclotriphosphazatrienes, 1a-c and 3, is explained by consideration of the equilibrium in solution of independent complexation of a chiral ligand with molecules that have two chiral cyclophosphazene moieties separated by an achiral spacer group. The results show that the stereogenicity of such diastereoisomeric molecules in solution cannot be characterized unequivocally by NMR measurements on addition of either CSR or CSA.     

Isolation of the novel dirhodium(II/II) thiolate compound Rh(2)(eta(1)-C(6)H(5)S)(2)(mu-C(6)H(5)S)(2)(bpy)(2)

The reaction of the anticancer active compound [Rh(2)(mu-O(2)CCH(3))(2)(bpy)(2)(CH(3)CN)(2)][BF(4)](2) (1) (bpy = 2,2'-bipyridine) with NaC(6)H(5)S under anaerobic conditions yields Rh(2)(eta(1)-C(6)H(5)S)(2)(mu-C(6)H(5)S)(2)(bpy)(2).CH(3)OH (2), which was characterized by UV-visible, IR, and (1)H NMR spectroscopies as well as single-crystal X-ray crystallography. Compound 2 crystallizes as dark red platelets in the monoclinic space group C2/c with cell parameters a = 20.398(4) A, b = 11.861(2) A, c = 17.417(4) A, beta = 108.98 degrees, V = 3984.9(14) A(3), Z = 4. The main structural features are the presence of a [Rh(2)](4+) core with a Rh-Rh distance of 2.549(2) A bridged by two benzene thiolate ligands in a butterfly-type arrangement. The axial positions of the [Rh(2)](4+) core are occupied by two terminal benzene thiolates. Cyclic voltammetric studies of 2 reveal that the compound exhibits an irreversible oxidation at +0.046 V in CH(3)CN, which is in accord with the fact that the compound readily oxidizes in the presence of O(2). The fact that this unusual dirhodium(II/II) thiolate compound is formed under these conditions is an important first step in understanding the metabolism of dirhodium anticancer active compounds with thiol-containing peptides and proteins.     

Poly(2-hydroxyethyl acrylate) hydrogel confined in a hydrophobous porous matrix

A series of interpenetrated polymer networks (IPNs) in which the first component is a porous poly(ethyl methacrylate) (PEMA) hydrophobic network and the second one is a poly(2-hydroxyethyl acrylate) (PHEA) hydrophilic network were synthesized. Equilibrium sorption isotherms can be reduced to a single master curve for all the IPNs when the water absorbed is expressed per gram of PHEA in them. The equilibrium water sorption in immersion is always much smaller than that of pure PHEA. This feature is due to the confining effect of the stiff PEMA matrix. The plasticizing effect of the absorbed water on the PHEA phase was characterized using thermally stimulated depolarization currents, dynamic-mechanical analysis and dielectric relaxation spectroscopy. The results show that the shift of the main relaxation peak towards lower temperatures is unaffected by the presence of the PEMA matrix, and only depends on the water content per gram of PHEA in the IPN.     

Structure and Electronic Properties of Fullerenes C52q+: Is C522+ an Exception to the Pentagon Adjacency Penalty Rule?

The structure, vibrational spectra and electronic properties of the neutral, singly and doubly charged C52 fullerenes were studied by means of the Hartree-Fock method and density functional theory. Different isomers were considered, in particular those with the lowest possible number (five or six) of adjacent pentagons, and an isomer with a four-atom ring. For neutral and singly charged species, the most stable isomer is that with the lowest number of adjacent pentagons, namely five. However, for C(52)2+, the most stable structure has six adjacent pentagons. This finding, which contradicts the pentagon adjacency penalty rule, is a consequence of complete filling of the HOMO pi shell and the near-perfect sphericity of the most stable isomer. The simulated vibrational spectra show important differences in the positions and intensities of the vibrations for the different isomers.     

Particle and surface characterization of a natural illite and study of its copper retention

Illite clays are known to have a strong affinity for metallic pollutants in the environment and can be applied as low-cost adsorbents for industrial waste treatment. A crucial factor in the development of such applications, however, is the understanding of the chemical, mineralogical, and colloidal properties of these clays. It is also important to understand the mechanisms involved in the surface adsorption of metals by these adsorbants. In order to study the retention of transition metals on illite clays, we have applied surface characterization techniques such as FPIA, SEM-EDX, XRD, N2 (77 K) adsorption, and FTIR. In addition to these experimental techniques, we have also employed a theoretical model that accounts for the chemistry of transition metal ions, and considers the global retention process to be the sum of several single retention processes. This model adequately fits the experimental data and allows for the speciation of metal retention on illite surfaces. Between pH values of 2.53 and 3.01 the only adsorption processes are the electrostatic sorption of [Cu(H2O)6]2+, and the surface complexation of [Cu(H2O)6]2+ and [Cu(OH)(H2O)5]+ ions. Surface complexation of [Cu(OH)(H2O)5]+ ions increases with pH, overcoming [Cu(H2O)6]2+ retention, and thus contributing to the surface precipitation of Cu(OH)2.     

On fixed points of holomorphic automorphisms

Summary Banach M-lattices are studied from the view point whether all the biholomorphic automorphisms of their unit balls admit fixed points when continuously extended to the closure of the unit ball. A characterization of compact topologieal F-spaces is found in terms of the fixed points of the elements of AutB(C()) which enables to establish some particular properties also of the topological automorphisms of compact F-spaces. Finally it is shown that if the M- lattice E admits a predual then each member of Aut B(E) has fixed point if and only if E is isometrically isomorphic with some l-space.     

“Integer-making” theorems

Let X = {x₁, x₂,…} be a finite set and associate to every x_i a real number α_i. Let f(n) [g (n)] be the least value such that given any family $\text{F}$ of subsets of X having maximum degree n [cardinality n], one can find integers α_i, i=1,2,… so that α_i ? α_i|<1 and

$\text{∑}\text{x}{}_{\mathrm{i\; ?\; E}}\text{a}{}_{\mathrm{i}}\text{?}\text{∑}\text{x}{}_{\mathrm{i\; ?\; E}}\text{α}{}_{\mathrm{i}}\text{≤?(n)}\text{∑}\text{x}{}_{\mathrm{i\; ?\; E}}\text{a}{}_{\mathrm{i}}\text{?}\text{∑}\text{x}{}_{\mathrm{i\; ?\; E}}\text{α}{}_{\mathrm{i}}\text{≤}\text{g(n)}$

for all $\text{E ?}\text{F}$. We prove

$\text{f(n)≤n ? 1 and g(n)≤c(n}\text{log}\text{n)}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$

.