Solution and X-Ray Crystal Structures of the Di- and Tetra-allyl Ether of tert- utylcalix[4]arene

The di- and tetra-allyl ethers of tert-butylcalix[4]arene 1 and 2 have been prepared by alkylation of tert-butylcalix[4]arene with allyl bromide and K₂CO₃ using different reaction times. Solution ¹H NMR measurement of the di-allyl ether 1 and X-ray crystal structures of the complexes of 1 with chloroform (1a) or methanol (1b) indicate the cone conformation of 1 in which intramolecular hydrogen bonding can be maximized. The crystalline state conformers 1a and 1b are distorted in different grades depending on the solvent. While methanol is incorporated in the macrocycle, chloroform molecules do not occupy the cage. The solution ¹H NMR spectra of tetra-allyl ether 2 show the co-existence of the cone and partial cone conformation. The partial cone conformer of 2 was investigated by X-ray crystallography. In this compound hydrogen bonding is not existent. The conformer distribution is likely affected by steric and template effects.     

Dimethyl carbonate as a novel methylating reagent for fatty acids in analytical pyrolysis

Dimethyl carbonate (DMC) was investigated as a mild, harmless and odorless reagent for pyrolytic methylation of fatty acids. Soybean oil was selected as test material for its high content of (poly)unsaturated fatty acids. Pyrolyses were performed at 500, 700 and 900 degrees C by means of a heated platinum filament pyrolyser on-line and off-line to the GC-MS apparatus. Methyl esters of palmitic, linoleic, oleic and stearic acid were formed as prominent products from off-line pyrolysis of soybean oil in the presence of DMC and zeolite 13X. Fatty acid methyl esters (FAMEs) were not observed at important levels in the absence of zeolite, while on-line Py-GC-MS experiments resulted principally in the formation of free fatty acids and hydrocarbons. The FAME profiles obtained from the DMC/zeolite off-line pyrolysis were compared to those resulting from tetramethylammonium hydroxide (TMAH) thermochemolysis and BF3-methanol procedure. The observed differences between pyrolysis and methanolysis methods were principally attributed to the thermal degradation of unsaturated fatty acids. The effectiveness of the DMC/zeolite pyrolytic methylation was further demonstrated by the analysis of tripalmitine and soybean seeds.     

Lupane Pentacyclic Triterpenes Isolated from Stems and Branches of Maytenus imbricata (Celastraceae)

Four lupane pentacyclic triterpenes were isolated from the hexane extract of stems and branches of Maytenus imbricata Mart. ex Reissek : 3‐oxolup‐20(30)‐en‐29‐al ( 1 ), 30‐hydroxylup‐20(29)‐en‐3‐one ( 2 ), (11α)‐11‐hydroxylup‐20(29)‐en‐3‐one ( 3 ), and (3β)‐lup‐20(30)‐ene‐3,29‐diol ( 4 ). The structural identification of 1 – 4 was achieved by ¹H‐ and ¹³C‐NMR techniques, including 2D experiments (HSQC, HMBC, and NOESY).     

Modeling and simulation of free radical polymerization of styrene under semibatch reactor conditions

The first part of this approach is concerned with the elaboration of a radical polymerization model of styrenne, based on a kinetic diagram that includes chemical and thermal initiation, propagation, termination by recombination and chain transfer to the monomer. Furthermore, volume contraction during polymerization is considered, as well as the gel and glass effects. The mathematical formalism that describes the model in terms of moments is explored in detail. The model was then used to predict the changes in monomer conversion and molecular weight after intermediate addition of initiator and monomer. The results of this operation are dependent on the conditions of the reaction mass, quantity, and moment of substance addition. Therefore, the simulations were performed at different times with respect to the gel effect; before, during and after this phenomenon, and also with respect to different temperatures and initiators. Increasing the initiator concentration before the gel effect leads to an earlier appearance of the phenomenon and to a decrease in molecular weight. The ratio reveals a polydispersity index smaller for the intermediate addition of initiator. No significant changes take place during or after the gel effect. If along with the initiator, unreacted monomver (used to dissolve the initiator) enters the reactor, a small dip in conversion is observed. The general conclusion of this paper reveals the intermediate addition of initiator as a method to control polymer properties and to prevent the “dead-end” polymerization of styrene.     

Synthesis and structural revision of naturally occurring ayapin derivatives

The synthesis of three highly oxygenated naturally occurring coumarins, 8-methoxy-6,7-methylenedioxycoumarin, 5-methoxy-6,7-methylenedioxycoumarin and 5,8-dimethoxy-6,7-methylenedioxycoumarin is described for the first time, together with a new method for the preparation of ayapin (6,7-methylenedioxycoumarin). Comparison of the spectroscopic data of the synthetic tetraoxygenated coumarin 5,8-dimethoxy-6,7-methylenedioxycoumarin with literature reports resulted in the structural revision of several natural coumarins. Two coumarins, both identified as 5,8-dimethoxy-6,7-methylenedioxycoumarin must have other structures, while the structure of another coumarin, described as the isomeric 7,8-dimethoxy-5,6-methylenedioxycoumarin has to be revised to 5,8-dimethoxy-6,7-methylenedioxycoumarin.     

Diheteroarylmethanes. 6.(1) Probing the Electron-Withdrawing Rank of Heteroaryl Groups by Conformational Studies of Push-Pull Ethylenes. Isolation of NH-Enamine Tautomers of alpha,alpha-Diheteroarylacetaldehydes (Heteroaryl = 2-Benzoxazolyl, 2-Benzothiazolyl)

Enamines and enol ethers substituted in the beta position by the 2-benzoxazolyl and 2-benzothiazolyl group have been obtained by condensing dimethylformamide dimethyl acetal and ethyl orthoformate, respectively, with bis(2-benzoxazolyl)methane and bis(2-benzothiazolyl)methane. A dynamic NMR and semiempirical (PM3) investigation on rotational energy barriers has been carried out in order to rank the electron-withdrawing capacity of the heterocyclic rings. The NMR-based evaluation of the energy barriers corresponding to the rotation along the enaminic double bond has shown that the pi-electron-withdrawing power of benzothiazole is larger than that of benzoxazole, in full accord with previously obtained charge demand values based on (13)C and (15)N pi-charge/shift relationships. The NMR and the computational approaches have led to consistent results. The X-ray crystal structure of alpha,alpha-bis(2-benzothiazolyl)-beta-(dimethylamino)ethene shows that only one heteroaryl ring is coplanar with the enaminic double bond, while the second one is twisted by 73 degrees relative to such a plane. Moreover, in this case calculations closely reproduce the experimental results. In the calculated transition states corresponding to the rotational process along the enamine double bond, the two heteroaryl groups become coplanar and conjugation develops between the enaminic nitrogen electron pool and both heterocycles. The lower rotational barrier observed in the case of the 2-benzothiazolyl derivatives, with respect to the 2-benzoxazolyl derivatives, is therefore a direct consequence of the higher electron-withdrawing power of the former group. Furthermore, a stabilizing intramolecular nonbonded S.S interaction in the rotational transition state of the benzothiazolyl derivatives is evidenced by the calculations. An unprecedented isolation of the NH-enamine tautomer involving the benzoxazolyl and benzothiazolyl ring in alpha,alpha-diheteroacetaldehydes has been performed, confirming these heterocycles as strong electron-withdrawing substituents.     

High-frequency and -field electron paramagnetic resonance of high-spin manganese(III) in tetrapyrrole complexes

High-field and -frequency electron paramagnetic resonance (HFEPR) spectroscopy has been used to study three complexes of high spin Manganese(III), 3d4, S = 2. The complexes studied were tetraphenylporphyrinatomanganese(III) chloride (MnTPPCI), phthalocyanatomanganese(III) chloride (MnPcCl), and (8,12-diethyl-2,3,7,13,17,18-hexamethylcorrolato)manganese(III) (MnCor). We demonstrate the ability to obtain both field-oriented (single-crystal like) spectra and true powder pattern HFEPR spectra of solid samples. The latter are obtained by immobilizing the powder, either in an n-eicosane mull or KBr pellet. We can also obtain frozen solution HFEPR spectra with good signal-to-noise, and yielding the expected true powder pattern. Frozen solution spectra are described for MnTPPCl in 2:3 (v/v) toluene/CH2Cl2 solution and for MnCor in neat pyridine (py) solution. All of the HFEPR spectra have been fully analyzed using spectral simulation software and a complete set of spin Hamiltonian parameters has been determined for each complex in each medium. Both porphyrinic complexes (MnTPPCl and MnPcCl) are rigorously axial systems, with similar axial zero-field splitting (zfs): D approximately -2.3 cm(-1), and g values quite close to 2.00. In contrast, the corrole complex, MnCor, exhibits slightly larger magnitude, rhombic zfs: D approximtely -2.6 cm(-1), absolute value(E) approximately 0.015 cm(-1), also with g values quite close to 2.00. These results are discussed in terms of the molecular structures of these complexes and their electronic structure. We propose that there is a significant mixing of the triplet (S = 1) excited state with the quintet (S= 2) ground state in Mn(III) complexes with porphyrinic ligands, which is even more pronounced for corroles.     

Variants of Solid-State and Solution Structures of (η3-Allyl)- {2-[2′-(diphenylphosphino)phenyl]-4,5-dihydrooxazole-P,N}palladium(II) hexafluorophosphates and tetraphenylborates

Crystal and solution structures of the enantiomerically pure and the racemic pairs of (η³-allyl) {2-[2′-(diphenylphosphino)phenyl]-4,5-dihydro-4-phenyloxazole}palladium(II) hexafluorophosphates ( 1 , and rac- 1 , resp.) and tetraphenylborates ( 2 , and rac- 2 , resp.) as well as (η³-allyl){2-[2′-(diphenylphosphino)phenyl]-4,5-dihydro-4-isopropyloxazole}palladium(II) tetraphenylborate ( 3 ) were characterized by X-ray crystallography and ¹H-NMR spectroscopy. In the solid state, rac- 1 and rac- 2 proved to be disordered with both diastereoisomeric complexes in the crystal. The complexes 2 and 3 exist only in the ‘exo’ form. The X-ray structures show that the [Pd^II(η³-allyl)] moiety may adopt different configurations between a nearly symmetrical three-electron Pd^II(π³-allyl) system and an asymmetrical allyl group with a η¹- and a η²-bonding to the metal center. The [Pd^II(η³-allyl)] system of rac- 1 and of ‘endo’ rac- 2 is closer to the former, and that of 2 , ‘exo’-rac- 2 , and 3 closer to the later geometry. The ¹H-NMR spectra of the hexafluorophosphates 1 and rac- 1 show two sets of signals of the allylic protons in an ‘exo’/‘endo’ ratio of 2:3. The tetraphenylborates 2, rac- 2 , and 3 give only one set of broad signals of the allylic protons.     

Designing generalized statistical ensembles for numerical simulations of biopolymers

Conformational properties of polymers, such as average dihedral angles or molecular alpha-helicity, display a rather weak dependence on the detailed arrangement of the elementary constituents (atoms). We propose a computer simulation method to explore the polymer phase space using a variant of the standard multicanonical method, in which the density of states associated to suitably chosen configurational variables is considered in place of the standard energy density of states. This configurational density of states is used in the Metropolis acceptance/rejection test when configurations are generated with the help of a hybrid Monte Carlo algorithm. The resulting configurational probability distribution is then modulated by exponential factors derived from the general principle of the maximal constrained entropy by requiring that certain average configurational quantities take preassigned (possibly temperature dependent) values. Thermal averages of other configurational quantities can be computed by using the probability distributions obtained in this way. Moments of the energy distribution require an extra canonical sampling of the system phase space at the desired temperature, in order to locally thermalize the configurational degrees of freedom. As an application of these ideas we present the study of the structural properties of two simple models: a bead-and-spring model of polyethylene with independent hindered torsions and an all-atom model of alanine and glycine oligomers with 12 amino acids in vacuum.     

Synthesis of novel 1,4‐dihydropyrido[3′,2′:5,6]thiopyrano[4,3‐c]‐pyrazoles and 5H‐pyrido[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidines as potential antiproliferative agents

The synthesis of new planar derivatives characterized by the presence of a pyridothiopyranopyrazole or pyridothiopyranopyrimidine nucleus, carrying a substituted aryl group, is reported. The novel 1,4‐dihydropyrido[3′,2′:5,6]thiopyrano[4,3‐c]pyrazole derivatives were obtained by condensation of 2,3‐dihydro‐3‐hydroxymethylenethiopyrano[2,3‐b]pyridin‐4(4H)‐ones with appropriate hydrazines. The preparation of 2‐substituted pyrido[3′,2′:5,6]thiopyrano[4,3‐d]pyrimidines was accomplished from the intermediate 2,3‐dihy‐dro‐3‐dimethylaminomethylenethiopyrano[2,3‐b]pyridin‐4(4H)‐ones by reaction with the appropriate binucleophile amidines. The antiproliferative activity of some new products was tested by an in vitro assay on human tumour cell lines (HL‐60 and HeLa), but none of them showed any significant effects in the tests performed. Accordingly, linear flow dichroism measurements indicated their inability to form a molecular complex with DNA.