Sequential atomic absorption spectrometric determination of nitrate and nitrite in meats by liquid-liquid extraction in a flow-injection system

Sequential determinations of nitrate and nitrite based on continuous liquid-liquid extraction, and suitable for their routine determinations in meats, are reported. Nitrate reacts with bis(2,9-dimethyl-1,10-phenanthrolinato)copper(I) to form an ion-pair which is extrated into 4-methyl-2-pentanone in a flow-injection manifold. In one aliquot of sample, nitrite is oxidized by cerium(IV), so that total nitrate is determined. In another, nitrite is converted to nitrogen with sulfamic acid, so that only the original nitrate is determined. By measuring the atomic absorption signal of copper in the organic phase, mixtures of these anions can be determined at μg ml^?1 levels for nitrate/nitrite ratios from 10:1 to 1:10, with a sampling frequency of ca. 20 h^–1.     

Evaluation of isothermal kinetic of sweetener

Summary Sulfonylureas are widely used for the treatment of non-insulin dependent diabetes mellitus. Glibenclamide belongs to the group of substituted arylsulfonylureas. Many representative of this group shows polymorphism. The purpose of this work was to investigate the thermal behaviour and compatibility between glibenclamide and some excipients using thermoanalytical techniques (TG-DTG/DSC). The thermal and isothermal kinetics data showed incompatibility between glibenclamide and magnesium stearate.     

Protection against photoaging in the hairless mouse by the isoflavone equol

Topical application of the isoflavone equol immediately following solar-simulated UV (SSUV) radiation exposure has previously been demonstrated to have significant photoprotective effects. Equol reduced both the inflammatory edema and the systemic suppression of the contact hypersensitivity reaction in hairless mice. Furthermore, daily topical equol application immediately following irradiation during a 10-week chronic SSUV exposure regime also reduced photocarcinogenesis severity in the mouse. This study examines the potential for topical equol to prevent photoaging in response to chronic SSUV irradiation for up to 30 weeks. We did not find consistent expression of the characteristic markers of photoaging until 30 weeks, although moderate epidermal hyperplasia and a transient increase in dermal mast cell numbers were evident after 1 week. Daily application of 10 muM equol lotion significantly reduced these early changes. However after 30 weeks of SSUV exposure, photoaging was well developed, as shown histologically by markedly increased epidermal hyperplasia, increased dermal mast cell number, pronounced focal elastotic deposits, degraded dermal collagen and deposition of glycosaminoglycans in the lower dermis. Topical equol treatment protected significantly from each of these impairments, as demonstrated histologically and quantitatively. Additionally, equol was found to have strong antioxidant action against acute UVA (320-400 nm)-induced lipid peroxidation of mouse skin, this property accounting for its antiphotoaging mechanism. The evidence for equol's antiphotoaging activity, taken together with its anti-inflammatory, immunoprotective and anticarcinogenic efficacy against SSUV irradiation in the mouse, suggests that equol could be developed as a helpful topical photoprotective agent for daily use by humans.     

π‐Facial Selectivity in the Formation of Tricarbonylchromium(0) Complexes of Estra‐1, 3, 5(10), 6‐tetraenes

The preparation of two η⁶‐estra‐1, 3, 5(10), 6‐tetraene tricarbonylchromium complexes 4 and 6 are described. In both cases only one stereoisomer can be isolated, in contrast to other estrane‐tricarbonylchromium complexes, where complexations are non‐stereoselective. X‐ray crystal structural analysis of 4 discloses that only the more sterically hindered β‐facial isomer is formed. It is assumed that the 6, 7‐olefinic moiety exerts a directive influence on the complexation.     

Fluorescence quenching of anthropogenic fulvic acids by Cu(II), Fe(III) and UO(2)(2+)

The quenching of the fluorescence of three anthropogenic fulvic acids (FA) provoked by Cu(II) (pH 6.0), Fe(III) (pH 4.0) and UO₂²⁺ (pH 3.5), was analyzed by a non-linear method and by Stern-Volmer plots. The FA samples were extracted from composted sewage sludges (csFA), composted municipal wastes (mwFA) and composted livestock wastes (lsFA). Synchronous-scan fluorescence (SyF) spectra were collected as a function of metal ion concentration. Spectral data were treated by a self-modeling mixture analysis method (SIMPLISMA) to detect the SyF spectral band with the strongest quenching and to calculate the corresponding quenching profile. The analysis of these profiles by a non-linear method allowed the estimation of conditional stability constants (K) and of the percentage of non-complexing fluorophores. The same quantitative information was obtained by the modified Stern-Volmer equation taking into account the existence of fluorophores that do not participate in the complexation. Good agreement was found between the results of the two procedures. The log K calculated by the non-linear method were (standard deviation in parenthesis): csFA, Cu(II), 4.22 (5); Fe(III), 5.0 (1); UO₂²⁺, 5.2 (2); mwFA, Cu(II), 4.21 (3); Fe(III), 5.6 (2); UO₂²⁺, 4.7 (3); lsFA, Cu(II), 4.51 (8); Fe(III), 5.5 (2); UO₂²⁺, 3.6 (2).     

Enhanced fluorescence from arrays of nanoholes in a gold film

Arrays of sub-wavelength holes (nanoholes) in gold films were used as a substrate for enhanced fluorescence spectroscopy. Seven arrays of nanoholes with distinct periodicities (distances between the holes) were fabricated. The arrays were then spin-coated with polystyrene films containing different concentrations of the fluorescent dye oxazine 720. The dye was excited via resonant extraordinary transmission of the laser source through the nanoholes. Enhanced fluorescence was observed when the geometric characteristics of the arrays allowed for an enhancement in the transmitted excitation. This enhancement occurred via surface plasmon excitation by the laser and a consequential increase in the local electromagnetic field in a sub-wavelength region at the metal-film interface. It was demonstrated that the sensitivity of the fluorescence measurement (change in signal vs change in dye concentration in the polymer film) is significantly larger at the surface plasmon resonance conditions than that obtained from equivalent films on glass substrates. Enhancement factors for the fluorescence emission were calculated for each array, with a maximum enhancement of close to 2 orders of magnitude as compared to the emission of films on glass. The results presented here indicate that arrays of nanoholes are interesting substrates for the development of fluorescence sensors based on surface plasmon resonance, as they provide a platform that allows both spatial confinement and enhancement of excitation light. Moreover, the collinear characteristics of the present optical setup, due to the resonant extraordinary transmission through the nanohole arrays, are more conducive to miniaturization and chip integration than more traditional experimental geometries.     

Molecular structure and polarity of the C3NH carbene

Ab initio MP 2/4-31G ** calculations indicate that the most stable form of C₃NH is bent and singlet and that the linear structure corresponds to a maximum. The effect of changing the CNH angle on the total energy is slight, but it is quite pronounced on the molecular polarity. The wider angle tends to increase the polarity of C₃NH. MP 2/4-31G ** calculations predict a difference of polarity between linear and bent structures of 0.8 D.     

Luminescent Sensing with Quantum Dots

Summary This review highlights recent advances in the use of quantum dots (QD’s) as luminescent sensors. The bulk of the study concentrates on systems that possess organic ligands bound to the surface of QD’s. These ligands vary from low molecular weight thiols to larger molecules such as maltose binding protein. All have one thing in common: when a target analyte binds to the ligand/receptor, a perturbation of the system occurs, that registers itself as a change in the luminescence intensity of the QD. Two main mechanisms are prevalent in controlling the luminescent intensity in such systems. The first is Photoinduced Electron Transfer (PET) and the second energy transfer. This review looks at current sensors that operate by using these mechanisms. Two component systems are also investigated where a quencher is first added to a solution of the QD, followed by addition of the target analyte that interacts with the quencher to influence the luminescence intensity.     

Synthesis and in Vitro Evaluation of N-[[4-[2-(Carboxyl)-1-Cycloalken-1-yl]Phenyl]Methyl]Imidazoles as Nonpeptide Angiotensin II Receptor Antagonists

A series of nonpeptide angiotensin II receptor antagonists was synthesized via palladium-assisted cross coupling of aryl stannane and cycloalkenyl triflates and subsequent alkylation of silyl-protected imidazole. Our compounds, which have a terminal five- to seven-membered cycloalkenyl ring, are compared to DuPont EXP7711, an N-[(2′-carboxybiphenylyl)methyl]imidazole, which has a terminal phenyl moiety. Physicochemical properties of the compounds, such as lipophilicity, steric bulk, conformation, and the relative spatial proximity of the 2-carboxyl and the middle phenyl, are quantitated by computational chemistry. Potency in terms of binding affinity to AT₁ receptors in rat adrenal glomerulosa and rabbit aorta is maximized when the terminal ring is aromatic.     

Adsorption-penetration studies of glucose oxidase into phospholipid monolayers at the 1,2-dichloroethane/water interface.

The interaction between glucose oxidase (GOx) and phospholipid monolayers is studied at the 1,2-dichloroethane/water interface by electrochemical impedance spectroscopy. Electrochemical experiments show that the presence of GOx induces changes in the capacitance curves at both negative and positive potentials, which are successfully explained by a theoretical model based on the solution of the Poisson-Boltzmann equation. These changes are ascribed to a reduced partition coefficient of GOx and an increase of the permittivity of the lipid hydrocarbon domain. Our results show that the presence of lipid molecules enhances the adsorption of GOx molecules at the liquid/liquid interface. At low lipid concentrations, the adsorption of GOx is probably the first step preceding its penetration into the lipid monolayer. The experimental results indicate that GOx penetrates better and forms more stable monolayers for lipids with longer hydrophobic tails. At high GOx concentrations, the formation of multilayers is observed. The phenomenon described here is strongly dependent on 1) the GOx and lipid concentrations, 2) the nature of the lipid, and 3) the potential drop across the interface.