Comparative investigation of the cleavage step in the synthesis of model peptide resins: implications for Nalpha-9-fluorenylmethyloxycarbonyl-solid phase peptide synthesis

Based on our studies of the stability of model peptide-resin linkage in acid media, we previously proposed a rule for resin selection and a final cleavage protocol applicable to the Nalpha-tert-butyloxycarbonyl (Boc)-peptide synthesis strategy. We found that incorrect choices resulted in decreases in the final synthesis yield, which is highly dependent on the peptide sequence, of as high as 30%. The present paper continues along this line of research but examines the Nalpha-9-fluorenylmethyloxycarbonyl (Fmoc)-synthesis strategy. The vasoactive peptide angiotensin II (AII, DRVYIHPF) and its [Gly8]-AII analogue were selected as model peptide resins. Variations in parameters such as the type of spacer group (linker) between the peptide backbone and the resin, as well as in the final acid cleavage protocol, were evaluated. The same methodology employed for the Boc strategy was used in order to establish rules for selection of the most appropriate linker-resin conjugate or of the peptide cleavage method, depending on the sequence to be assembled. The results obtained after treatment with four cleavage solutions and with four types of linker groups indicate that, irrespective of the circumstance, it is not possible to achieve complete removal of the peptide chains from the resin. Moreover, the Phe-attaching peptide at the C-terminal yielded far less cleavage (50-60%) than that observed with the Gly-bearing sequences at the same position (70-90%). Lastly, the fastest cleavage occurred with reagent K acid treatment and when the peptide was attached to the Wang resin.     

High-performance liquid chromatographic separation of rolipram, bupivacaine and omeprazole using a tartardiamide-based stationary phase influence of flow rate and temperature on the enantioseparation

Chromatographic separation of the chiral drugs rolipram, bupivacaine and omeprazole on a tartardiamide-based stationary phase commercially named Kromasil CHI-TBB is shown in this work. The effect of temperature on the chromatographic separation of the chiral drugs using the Kromasil CHI-TBB stationary phase was determined quantitatively so as to contribute toward the design for the racemic mixtures of the named compound by using chiral columns. A decrease in the retention and selectivity factors was observed, when the column temperature increased. Van't Hoff plots provided the thermodynamic data. The variation of the thermodynamic parameters enthalpy and entropy are clearly negative meaning that the separation is enthalpy controlled.     

Copper acetylacetonate anchored onto amine-functionalised clays

Copper (II) acetylacetonate was immobilised directly onto two clays, laponite (Lap) and K10-montmorillonite (K10), and after their amine functionalisation with (3-aminopropyl)triethoxysilane (APTES). All the materials were characterised by nitrogen adsorption isotherms at -196 degrees C, elemental analysis, TG-DSC, XRD, and IR spectroscopy. The K10-based materials were also characterised by XPS. The APTES-functionalised K10 showed higher copper loading than K10, indicating that the clay functionalisation enhanced the complex immobilisation; on the contrary, in Lap-based materials higher metal content was obtained by direct complex anchoring, probably due to the delaminated nature of Lap which induced the particles aggregation on functionalisation with APTES. All the results pointed out that the Cu complex was anchored onto the amine-functionalised clays by Schiff condensation between the amine groups of anchored APTES and the carbonyl groups of the acetylacetonate ligand, whereas direct immobilisation proceeded mostly through interaction between the metal centre and the clay surface hydroxyl groups.     

Anchoring of a [Mn(salen)Cl] complex onto mesoporous carbon xerogels

Carbon xerogels were synthesized by the conventional sol-gel approach using formaldehyde and resorcinol. The wet gel was dried by two different procedures followed by carbonization, leading to mesoporous carbon xerogels with considerably different pore size distributions. The materials were subsequently oxidized with air, in order to introduce functional groups on the surface, in particular phenols, anhydrides and carbonyls. The capacity of the carbon xerogels for direct immobilization of metal complexes was tested with a manganese(III) salen complex which possesses an extended ligand pi system and two reactive hydroxyl groups on the aldehyde fragment. The manganese loadings of the various samples indicate that larger amounts of Mn(III) complex were immobilized in the oxidized carbon xerogels when compared with the parent unactivated materials, suggesting that complex immobilization took place preferably by covalent bond between the surface oxygen functional groups and the ligand reactive groups, rather than by pi-pi interactions. The size and shape of the carbon xerogel pores were also shown to play an important role in the final loading of the manganese(III) salen complex.     

BORAZANs: tunable fluorophores based on 2-(pyrazolyl)aniline chelates of diphenylboron

The reaction between 2-pyrazolyl-4-X-anilines, H(pzAnX), (X = para-OMe (L1), Me (L2), H (L3), Cl (L4), CO2Et (L5), CF3 (L6), CN (L7)) and triphenylboron in boiling toluene affords the respective, highly emissive N,N'-boron chelate complexes, BPh2(pzAnX) (X = para-OMe (1), Me (2), H (3), Cl (4), CO2Et (5), CF3 (6), CN (7)) in high yield. The structural, electrochemical, and photophysical properties of the new boron complexes can be fine-tuned by varying the electron-withdrawing or -donating power of the para-aniline substituent (delineated by the substituent's Hammett parameter). Those complexes with electron-withdrawing para-aniline substituents such as CO2Et (5), CF3 (6), and CN (7) have more planar chelate rings, more 'quinoidal' distortion in the aniline rings, greater chemical stability, higher oxidation potentials, and more intense (phiF = 0.81 for 7 in toluene), higher-energy (blue) fluorescent emission compared to those with electron-donating substituents. Thus, for 1 the oxidation potential is 0.53 V versus Ag/AgCl (compared to 1.12 V for 7), and the emission is tuned to the yellow-green but at an expense in terms of lower quantum yields (phiF = 0.07 for 1 in toluene) and increased chemical reactivity. Density functional calculations (B3LYP/6-31G*) on PM3 energy-minimized structures of the ligands and boron complexes reproduced experimentally observed data and trends and provided further insight into the nature of the electronic transitions.     

Seasonal and biological variations of Epidendrum mosenii: quantification of 24-methylenecycloartanol using gas chromatography

Epidendrum mosenii is a Brazilian medicinal plant, traditionally used to treat infective and dolorous processes. The present article reports a comparative study of the chemical and pharmacological aspects of different parts and seasons of this plant. The results demonstrate that 24-methylenecycloartanol (1), one of the main active principles present in this plant, is located practically in all the parts and during all seasons, but it is much more concentrated in the stems when collected in spring and summer. The pharmacological results indicate that dichloromethane extracts collected in spring and summer were the most active when evaluated against the writhing test in mice, being several times more potent than some reference drugs used as comparison. Together, the results strongly suggest that the antinociceptive effect of E. mosenii is related, at least in part, to the presence of compound 1, and this finding could be useful for quality control of phytopreparations based on this plant.     

Mixed unsymmetric oxadiazoline and/or imine platinum(II) complexes

Iminoacylation of acetone oxime Me(2)C[double bond, length as m-dash]NOH upon reaction with trans-[PtCl(2)(NCCH(2)CO(2)Me)(2)] and [2 + 3] cycloaddition of acyclic nitrone (-)O(+)N(Me) = C(H)(C(6)H(4)Me-4) to a nitrile ligand in lead to the formation of mono-imine trans-[PtCl(2)(imine-a)(NCCH(2)CO(2)Me)] [imine-a = NH[double bond, length as m-dash]C(CH(2)CO(2)Me)ON = CMe(2)] and mono-oxadiazoline trans-[PtCl(2)(oxadiazoline-a)(NCCH(2)CO(2)Me)] [oxadiazoline-a = [upper bond 1 start]N[double bond, length as m-dash]C(CH(2)CO(2)Me)ON(Me)C[upper bond 1 end](H)(C(6)H(4)Me-4)] unsymmetric mixed ligand complexes, respectively, as the main products. Reactions of or with acetone oxime , cyclic nitrone (-)O(+)N = CHCH(2)CH(2)C[upper bond 1 end]Me(2) or N,N-diethylhydroxylamine give access, in moderate to good yields, to the unsymmetric mixed ligand oxadiazoline and/or imine complexes trans-[PtCl(2)(oxadiazoline-a)(imine-a)] , trans-[PtCl(2)(oxadiazoline-a)(oxadiazoline-b)] [oxadiazoline-b = [upper bond 1 start]N[double bond, length as m-dash]C(CH(2)CO(2)Me)O[lower bond 1 start]NC[upper bond 1 end](H)CH(2)CH(2)C[lower bond 1 end]Me(2)], trans-[PtCl(2)(imine-a)(imine-b)] [imine-b = NH = C(CH(2)CO(2)Me)ONEt(2)] or trans-[PtCl(2)(imine-a)(oxadiazoline-b)] . The cis mono-imine mixed ligand complex cis-[PtCl(2)(imine-a)(NCCH(2)CO(2)Me)] is the major product from the reaction of cis-[PtCl(2)(NCCH(2)CO(2)Me)(2)] with the oxime , while the di-imine compound cis-[PtCl(2)(imine-a)(2)] is a minor product. Reaction of cis-[PtCl(2)(imine-a)(NCCH(2)CO(2)Me)] with N,N-diethylhydroxylamine or the cyclic nitrone affords, in good yields, the unsymmetric mixed ligand complexes cis-[PtCl(2)(imine-a)(imine-b)] or cis-[PtCl(2)(imine-a)(oxadiazoline-b)] , respectively. All these complexes were characterized by elemental analyses, IR and (1)H, (13)C and (195)Pt NMR spectroscopies, and FAB(+)-MS. The X-ray structural analysis of trans-[PtCl(2){NH=C(CH(2)CO(2)Me)ON=CMe(2)}(NCCH(2)CO(2)Me)] is also reported.     

Experimental and computational study of the thermochemistry of the fluoromethylaniline isomers

The standard (po = 0.1 MPa) molar enthalpies of formation in the condensed phase of seven isomers of fluoromethylaniline were derived from the standard molar energies of combustion, in oxygen, to yield CO2(g), N2(g) and HF.10H2O(l), at T = 298.15 K, measured by rotating bomb combustion calorimetry. The standard molar enthalpies of vaporization or sublimation of these compounds, also at T = 298.15 K, were determined using Calvet microcalorimetry, while the enthalpies of fusion of the solid compounds were determined by differential scanning calorimetry. The standard molar enthalpies of formation in the gaseous phase, at T = 298.15 K, were derived from the former two experimental quantities. G3MP2//B3LYP calculations were performed for all possible fluoromethylanilines allowing the estimation of data for the isomers that were not studied experimentally. The Cox scheme was applied with two different approaches for the estimation of the standard molar enthalpies of formation of all the isomers studied, and this led to the conclusion that the literature values for the enthalpies of formation of the meta and para isomers of methylaniline seem to be not reliable. Further G3MP2//B3LYPs calculations on the methylaniline isomers yielded new values for the standard molar enthalpies of formation of the isomers of methylaniline, which have been tested under the Cox scheme, resulting in better estimates.     

Photoinduced electron transfer between the cationic complexes Ru(NH3)5pz2+ and trans-RuCl([15]aneN4)NO2+ mediated by phosphate ion: visible light generation of nitric oxide for biological targets

The photochemical behavior of the tetraazamacrocyclic complex trans-RuCl([15]ane)(NO)2+ (RuNO2+) in a 10 mM phosphate buffer solution, pH 7.4, and in the presence of Ru(NH3)5pz2+ (Rupz2+) is reported. Irradiation (436 nm) of an aqueous solution containing both cationic complexes as PF6- salts labilizes NO from RuNO2+ with a quantum yield (phiNO) dependent on the concentration of Rupz2+ with a maximum value of phiNO (1.03(11)x10(-3) einstein mol-1) found for a solution with equimolar concentrations (5x10(-5) M) of the two complexes in phosphate buffer solution. The quantitative behavior of this system suggests that the two cations undergo preassociation such that photoexcitation of the visible absorbing Rupz2+ is followed by electron or energy transfer to RuNO2+, which does not absorb appreciably at the excitation wavelength, and this leads to NO release from the reduced nitrosyl complex. Notably, the NO release was not seen in the absence of phosphate buffer; thus, it appears that phosphate ions mediate NO generation, perhaps by facilitating formation of a supramolecular complex between the two ruthenium cations. Reexamination of the cyclic voltammetry of Rupz2+ showed that the electrochemical behavior of this species is also affected by the presence of the phosphate buffer.