Theα-α′ phase transition of hydrogen in elastically anisotropic cubic metals

The formulation of the statistical mechanics of the - phase transition in hydrogenmetal-systems is extended in such a way as to include the elastic anisotropy of the host crystal. The corresponding reduction of symmetry leads to qualitative modifications of the results. Depending on hydrogen concentration and temperature, phases with homogeneous,C ₃- andC ₂-symmetric equilibrium hydrogen distributions are formed. The transitions between these phases are investigated, and the relation of their orders and the corresponding changes in symmetry is studied. Differences between isotropic and anisotropic systems are discussed.     

Fingerprint patterns from laser-induced Azido photochemistry of spin-labeled photoaffinity ATP analogs in matrix-assisted laser desorption/ionization mass spectrometry

The photochemical reaction of azide derivatives induced by ultraviolet (UV) laser in matrix-assisted laser desorption/ionization mass spectrometry (MALDI) is reported. A novel synthesized class of azide aromatic derivatives, spin-labeled photoaffinity non-nucleoside adenosine triphosphate (ATP) analogs which are useful probes in study of muscle contraction mechanism, is used in this investigation. In the negative ion MALDI spectra of these ATP analogs, “fingerprint” peaks corresponding to [M − 10 − 1]⁻, [M − 12 − 1]⁻, [M − 16 − 1]⁻, [M − 26 − 1]⁻, [M − 28 − 1]⁻, [M − 41 − 1]⁻, and [M − 42 − 1]⁻ were observed with relative intensities depending on the MALDI matrix. Only the [M − 16 − 1]⁻ is present in the similar mass spectra of the analog in which the azido group is replaced by a hydrogen. A model is suggested for the photochemical reactions of azide derivatives under UV laser irradiation. The photoreaction fingerprint information is diagnostically useful in characterization of azido compounds, especially for spin-labeled photoaffinity non-nucleoside ATP analogs.     

Nucleotide and aldehyde analysis by HPLC for determination of radical induced damage

Summary The analysis of two metabolite groups, nucleotides and aldehydes, is necessary for assessment of oxygen radical metabolism during hypoxia and reoxygenation.Nucleotides and their derivatives were determined by HPLC using gradient elution with 10 mM NH₄H₂PO₄ buffer containing 2 mM t-butylammoniumphosphate and acetonitrile.Aldehydes occuring after lipid peroxidation were analyzed by derivatisation to dinitrophenylhydrazones followed by TLC and HPLC separation with methanol/water on an ODS column.     

A new maleimide-bound acid-cleavable solid-support reagent for profiling phosphorylation

A new chemical strategy for phosphopeptide profiling is reported in this study. Phosphorylation represents one of the most important classes of posttranslational modifications of proteins. Here we report a generalized strategy that employs solid-phase capture and mass-encoding steps to selectively enrich phosphopeptides from complex mixtures. This method exploits conversion of phosphates into thiols and reactive compounds to selectively isolate products of phosphorylation. Selective isolation of phosphopeptides is achieved with a simple, novel, acid-cleavable, solid-support-bound maleimide reagent. Our chemistry efforts have focused on minimization of linker size and simplification of reagent production with incorporation of common solid-phase peptide synthesis steps. Relative quantitation was demonstrated by modifying phosphopeptides with incorporation of ethanedithiol and propanedithiol. We observed that appropriate normalization is necessary to utilize mass tag strategies for relative quantitation of posttranslational modifications. The utility of solid-phase capture was determined with model phosphopeptides, and the method was demonstrated with enriching phosphopeptides from beta-casein, alpha-casein and ovalbumin. The solid-phase capture and release methods were also demonstrated with unfractionated whole histone protein mixtures to show this compound applicability in real biological samples. The new chemical strategy will ultimately be utilized for high-throughput profiling of phosphorylation and possibly other posttranslational modifications.     

Experimental study on the aging process of the LR 115 cellulose nitrate radon detector

An experimental determination of the aging process of cellulose nitrate detector material was based on the examination of special properties of the LR 115 solid state nuclear track detectors (SSNTDs) of various ages up to 18 years. The examined relevant parameters are the bulk etching rate v_b and the track etching rate v_t. These parameters are responsible for the appearance, the size and the registration efficiency of tracks of -particles from radon gas in the detector. To find a correlation between these material parameters and the detector sensitivity an experimental calibration of indoor room and outdoor soil detector devices based on LR 115 took place at the Umweltforschungszentrum Leipzig-Halle (Germany). To avoid routine calibration work in external radon exposure facilities a correction of the age dependent calibration factors with the material parameters measured in one's own laboratory was targeted. In this study a general age dependence, however, was not found. The following statements for practical applications can be made. (i) the bulk etching rate v_b for detectors of the same batch has a depth dependence and this dependence is constant over 2 years (LR 115 September 1994). (ii) detectors of different batches older than 5 years and stored at room temperature show an odd v_b behaviour when v_b is used for describing track shapes. (iii) the calibration factor of detectors of different batches that were stored at about +4°C is constant over 5 years (LR 115 September 1994 and February 1999, Table 2).

The conclusion is that LR 115 detectors not older than 5 years and stored in a refrigerator at about +4°C should be preferred for radon measurements. Furthermore these detectors should be recalibrated every year and the microscope work of this calibrations should be performed by the same person who performs the measurements.

In addition, a phenomenon related to fundamental track formation mechanisms was found, that the time straggling of the time t_through when vertical tracks penetrate the 12 μm thick detector layer is independent of the age of the detectors and the energy of the -particle at the detector surface.     

Structure selective ion molecule interactions (SSIMI) in ion mobility spectrometry

The overall objective of this project was to develop an analytical method that utilizes structure selective ion molecule interactions (SSIMI) in ion mobility spectrometry (IMS) to shift the mobility of a targeted analyte through the addition of a gas phase modifier to the buffer gas. IMS is a sensitive, rapid method for the detection of harmful chemicals; however false alarm responses do occur and a reduction in their frequency decrease both the cost and time required for detection. The investigation reported here probed the effects of a series of buffer gas modifiers on the mobilities of chemical warfare agent simulants (CWAs), toxic industrial chemicals (TICs) and a known interference (butyl carbitol) found in fire extinguishing agents. The major finding of this research was that a modifier with a proton affinity similar to, but not greater than, the target analyte produced the greatest changes in mobilities due to the formation of an ion cluster between the neutral modifier and target analyte ion. Mass spectrometry was utilized to confirm the formation of ion-neutral clusters that caused the target ion to shift its mobility. While a number of modifiers were screened, acetonitrile and isobutyronitrile were found to have sufficiently selective SSIMI with the target compound. For example, in the presence of acetonitrile modifier, the protonated response ion of the CWA simulant DMMP, [DMMP]H⁺, had a mobility shift of 10.8 %, but the mobility was unchanged for the interferent, butyl carbitol. The mobility of the simulant DMMP decreased with the introduction of modifiers, while the mobility of the interference did not change, demonstrating the potential of the SSIMI technique for reducing false alarm rates.     

Fourier transform ion mobility spectrometry of barbiturates after capillary gas chromatography

This paper demonstrates a novel operating mode of an ion mobility detector (IMD) for obtaining both qualitative and quantitative data after capillary gas chromatographic separation of 5,5′-disubstituted barbiturates. Using a recently developed time dispersive Fourier transform method for ion mobility spectrometry, complete ion mobility spectra could be obtained for each component in the chromatogram. This type of spectra can be used for providing qualitative information on unknown compounds or for selecting the proper detector conditions needed when operating in the continuous mobility monitoring mode. In this study each of the five barbiturates investigated produced a Fourier transformed ion mobility spectrum containing one major product ion. When drift times corresponding to those of the product ions measured in the FT mode were monitored continuously, selective chromatographic detection of the barbiturates was achieved. In one case even isomers could be differentiated based on mobility characteristics.     

Long-range interaction of point defects with arbitrary dipole tensors in a sphere

The elastic field of lattice defects in a sphere with a free surface is studied. The interaction energy of two arbitrary point defects in an elastically isotropic crystal is expanded in terms of spherical harmonics. Separate expressions are given for the infinite material contribution and for the surface term. The bearing of the results on phase transitions in defect-systems is discussed.     

Construction and evaluation of a hermetically sealed accurate ion mobility instrument

Ion mobility spectrometry (IMS) is widely used to detect and identify chemical warfare agents, narcotics, and explosives in the field based on their reduced mobility (K ₀ ) values. Current detection windows for these analytes can only be as narrow as ±2% of the K ₀ values for the analyte being sought. These wide detection windows cause false positive alarms when an interferent with a similar reduced mobility falls within the detection window and triggers an alarm. This results in the loss of time and money as resources are diverted to verify the alarm. A high rate of false positive alarms is caused by a discrepancy in the reported K ₀ values across the literature that is, at best, ± 2% of the average available values. By accurately and precisely measuring the variables affecting an ion’s K ₀ value, an accurate K ₀ value can be produced and the detection windows widths that are established using these reference values can be reduced. Components for accurate analyses have been assembled in the past and here the construction of an accurate ion mobility spectrometry drift tube is described that is accurate to 0.1% of the calculated K ₀ value and can be hermetically sealed without inserting the drift tube into a large vacuum chamber. Having a pressure sealed accurate ion mobility spectrometer will allow for the control of the pressure variable within the K ₀ equation and the safe analysis of hazardous chemicals. Here the construction of an inexpensive and easily reparable sealed drift tube is described.     

Effects of boundaries on structure formation in low-dimensional colloid model systems near the liquid-solid-transition in equilibrium and in external fields and under shear

A brief review focusing on low-dimensional colloidal model systems is given describing both simulation studies and complementary experiments, elucidating the interplay between phase behavior, geometric structures, and transport phenomena. These studies address the response of these very soft colloidal systems to perturbations such as uniform or uniaxial compression, laser fields, randomly quenched disorder, and shear deformation caused by moving boundaries. Binary hard-disk mixtures are studied by Monte Carlo simulation, to investigate ordering on surfaces or in monolayers, modeling the effect of a substrate by an external potential. By weak external laser fields the miscibility of the mixture can be controlled, and the underlying mechanism (laser-induced demixing) is clarified. The stability of various space-filling structures is discussed only for the case where no laser fields are present.Hard spheres interacting with repulsive screened Coulomb or dipolar interaction confined in 2D and 3D narrow constrictions are investigated by Brownian Dynamics simulation. With respect to the structural behavior, it is found that layers or planes throughout the microchannel are formed. The arrangement of the particles is disturbed by diffusion, and can also be modified by an external driving force causing a density gradient along the channel. Then the number of layers or planes gets reduced, adjusting to the density gradient, and this self-organized change of order also shows up in the particle velocities. The experimental work that is reviewed here addresses dipolar colloidal particles confined by gravity on a solid substrate on which a set of pinning sites has been randomly distributed. The dynamics of the system is studied by tracking the trajectories of individual particles, and it is found that the mean square displacements of particles that are nearest neighbors of pinned particles are strongly affected by these defects. The influence of the pinning sites on the order and microscopic mechanism of phase transitions in two dimensions is investigated.